Fluidmaster 507AKP7 2-Inch Toilet Flush Valve Repair Kit

Excellent kit! I had been fighting a flapper leak for quite awhile. Save the aggravation, and just put a this kit in. It's easier than you might think! The only modification I had to make was to cut the tube about 3" shorter to fit my toilet. No more leaks!

Easy to install and fit will in my Crane toilet. Solved the issue we had with an old leaky flush valve. I did have to trim down the height of the overflow tube by about 3 inches, so just be aware of that if the tank of your toilet is not super tall. Make sure you have a wrench that opens to at least 2.5 inches wide so you can install and properly tighten the nut at the base of the tank as this kit does not provide a tool to assist with that.

Worked fine (knock wood), no leaks and everything fit my decades-old toilet. I saw one person complain that a problem with the float valve caused a leak and damage; this kit does not include the float valve, so I do not know what that person was talking about. Another person complained about there only being two bolts; yes, that is how many you need. The entire process took me 1.5 hours, including cleaning and having to remove the old, corroded parts. One place in the instructions did not make sense, as it seemed to indicate putting a nut on over a bolt before that bolt goes through a hole. The diagram was more clear. They should also mention that the tank will be wobbly sitting on the gasket to the bowl portion before the nuts to either side get their final crankdown. Sure hope that it lasts, but I am purchasing one for an idential toilet.

The kit is good, but it will not fit my older 2002 Kohler. My toilet needs 3 bolts and a completely different tank gasket. The flush valve itself is good. It seals well and was easy to install. I would recommend, but just know it won't work with Kohler.

Works great, but it's exactly the same as regular. I thought Performance is some improvement, but it is exactly 1 to 1 as the regular of this company

Easy to install, would recommend this quality product, also ordered a second unit and repaired my other commode.

Hardware Store trip NOT INCLUDED !!! This kit contains only TWO tank bolts. My tank required three. Otherwise this kit worked as advertised.

-All the negative reviews seem to be user error or having a toilet that is not compatible. Watch youtube video(S) and compare with your toilet and you likely wont have any issues. -The toilet in question that I had was cycling every 2-3 minutes it was a Gerber model estimated late 1990s model. I had already replaced the fill valve and flapper at this point. So I took the plunge and bought this flush valve. -READ THE INSTRUCTIONS IN THEIR ENTIRETY, Make sure you have all the required tools before hand (namely a large enough crescent wrench or adjustable wrench) -The only issue I ran into was a small leak from the sides of the toilet (later determined to be reservoir screws) after each flush, I doubled down on the instructions and they supply many metal washers and rubbers washers for the reservoir screws and it specifies a correct order in which I neglected to put one of the rubber washers on the outer surface (weird the OEM screws weren't set up that way but nevertheless it fixed the leak).

Worked flawlessly.

Perfect fit for the American Standard toilet. Installation is quick if you have the right tools, and the price is reasonable.

So far, the product is working as it suppose to. Came with all the necessary parts and the instructions were clear and easy to follow.

Fonctionne à merveille, remplacement facile, qualité, pas necessaire mais personnellement j'aime utiliser du lubrifiant à la sillicone/plombier (jamais autre chose) sur les caoutchoucs pour un meilleur glissement d'assemblage et durabilité

Fits great, easy to install and stopped the leak.