ClosetMaid 14 in. Pull Out Cabinet Organizer, 2 Tier, Heavy Duty, Slide Out Pantry Shelves Drawers for Kitchen, Bathroom, Nickel

Solidly built, super easy to install. High sides keep large glass containers from wobbling when you pull it out. I was able to put 3 heavy1 gallon glass jars full of flour in one organizer drawer without any trepidation! easy smooth glide when you pull it out and push it back. It works out so well in purchasing more.

We just moved into our new house but there were no pull outs under the sinks. I ordered this one and as soon as I got it I installed it. It was super easy to install. Just 4 screws. I love the fact that it has high sides. In addition it was relatively cheap. I highly recommend purchasing this pull out.

Perfect for RV pantry cupboards. We can't access the back of the deep cupboards easily and while we lost some space for the track, we can actually get the stuff from the back so it's worth it. Slides in and out super easily.

This is a well-made product, and the painted coating was properly done. It comes in eight pieces (the wire baskets the two roller frames, and the exterior support brackets). Fortunately, it also came with the appropriate wood screws for mounting the bottom roller frame and the exterior frames as well as machine screws to mount the top roller frame to the exterior frames. The instructions were a bit weird to read, as instructions go, but once I got past the first picture frame I figured out the operating mechanism. In your cabinet make sure you measure the dimensions fully, and don't just go by the footprint of the product. The footprint is about 9.5 inches but the exterior frames protrude out, so if you have any supply or drain pipes under say your kitchen or bath vanity sink you'll want to ensure full clearance all the way up and all the way back. Also note that you need a lot of manual dexterity to assemble this into place. You'll have to physically mount the exterior frame and bottom roller frame to the cabinet. This is no easy task if you have a tight space or if you have physical dexterity issues. I'm very mechanically inclined and it took me 3x longer to install than anticipated because of the tight space I had to work with. When they suggest you give 1.75" from the cabinet edge to the front of the frame, make absolutely certain you do so. A quarter inch off will potentially impede your ability from fully closing your cabinet door as the basket protrudes out a bit past the foot print. I suggest mounting the front of the drawers first. You'll have four screws to install--one on each end through the exterior frame and then the innner-most holes which secures the exterior frame and roller frame together. Once the front is secured, then proceed to mount the back set. I suggest starting from the front and then the back to fully ensure your 1.75" spacing remains accurate. Again, a quarter inch off and you'll be hosed. Now that you've assembled the eight bottom wood screws to the cabinet, then proceed with mounting the top roller frame to the top part of the exterior frames with the machine screws. Again, a lot of dexterity will be needed. Pop one screw to each of the four top corner assembles. This will ensure everything successfully lines up (similar to replacing a wheel on a tire you changed). Apply your phillips screwdriver to the top of the screw with one hand and hold the nut on the bottom part of the screw with your other hand, then twist the screw one. Don't even try to twist the nut on as there's not enough clearance, even with the smallest of fingers. Once all machine screws and corresponding nuts are assemble to about 90% maximum tightness, go back and tighten each one by hand until secured--but not overtightened. The basket assemble can be tricky. You'll see that while the front and rear of the baskets may appear similar, they are not. The rear of the basket has two bars on the bottom running perpendicular to the basket. This is the rear part of the basket assembly. Both of those bars have to go into the roller frame slots. You'll have to raise the top of the basket about 25-35 degrees to fit the bars through. SPECIAL NOTE: There's this tiny piece of plastic on the outermost perpendicular bar. For some reason the plastic piece moved on one of my baskets, and thus it impeded the ability to slide this into the roller frame slot. It was easy to move back into position and the basket slide in lickity split thereafter. Overall, I like this product. I've spent hours and hours searching for shelf pull-outs. I liked the steel gray color as it makes it look less cheap and goes with the brushed nickel decor of the bathroom fixtures. It's pretty sturdy, considering it cost less than $30, and well worth the money--as long as you have the mechanical dexterity to assemble this. For the sake of other people, it would've been nice if they had suggested to pilot drill the screw holes and what size drill bit to use, but that would've complicated the instructions and require yet another tool on the needed tools install list. You should always try to pilot drill into wood, sheet rock, plastic, or metal, first, for significantly more easier installations.

This is a nicely designed organizer that is a good size for our cabinet. When I pulled everything out of the box one of the plastic glides that is needed for the drawer to slide into the tracks…I just put it back on and it seems to work great. This of course requires drilling rather than adhesive (which I think is superior for such a large drawer) … I first put the track/basket in place to choose the ideal spot…marked the front and front corners location on the wood. Then removed basket, lined up the frame, used a sharpie to mark each of the 4 drill holes (BTW I used the holes closest to the sides) … removed the frame and then drilled 1/2” pilot holes with 1/8” drill bit, then positioned the frame and screwed in the screws…easy peasy…then slid the basket into the frame and done! Probably took me thirty minutes but given my past install mistakes I was very careful this time to get it right. It has a nice amount of space. The chrome finish is appealing. It appears durable and the drawer slides easily.

I never thought I'd be so excited about a cabinet organizer. This little guy is a snack-storage superhero! It was a breeze to install – I didn't even need a cape. Now, my chip collection is neatly organized and easily accessible. It's like having a personal snack butler that glides in and out of the cabinet with the grace of a ninja. No more rummaging around for that elusive bag of Cheetos! If you're a snack enthusiast like me, this organizer is a must-have. It's the perfect way to level up your snack game and impress your friends with your impeccable organization skills.

I’m glad I got it for my elderly Moms pantry. It works great especially for the bottom shelf that she keeps large canisters of sugar, gal of vinegar etc. And its really durable

excellent rack to install in a vanity or other cabinet. Be sure to measure the cabinet for room to accommodate the rack.

Got two of these quite a while ago and put them in recently. I noticed that I didn't have a review (but had taken photos) so here it is. 😃 When I got them I noticed that the basket was fairly loose (side to side) in the track and thought this might be an issue. However, this was an easy fix (see first two photos) by loosening the screw in the corner of the rail and then pushing/bending the bent part where the screw goes through to exactly 90°. Then replace the screw. Do this for all four corners. To bend it I just pushed it down on a piece of carpet, but careful use of a hammer should be ok (use something to protect the finish like a small block of wood). Once done it has very little side to side movement. Don't go past 90° or you might have trouble putting in the basket. They come with four self-tapping screws and overall feel quite sturdy. The rail has room for eight screws so I felt better putting two extras in the back (two in front & four in back), just in case we happen to put something heavy in the front of the basket and pull the basket all the way out. Tip: Remember to drill a small hole first so the screw doesn't split the wood. I was able to fit two baskets in one shelf (open, my doors are 22+1\4" apart), I slightly towed the back of the two rails out from each other in the back of the cupboard so it would keep the baskets together if they were pulled out at the same time. This also helped to not rub the inside of the doors too much. My first two were around $20 each, but even though they have gone up $7 I just ordered four more as they are built well and still the best price. Recommended, my wife loves them!

Good product, easy to install and use.

Perfect fit to mu cupboard

Es un poco caro, pero sin duda es una excelente compra si se busca optimizar espacios y hacer mas funcional el proceso de cocina. Es muy resistente, los rieles corren bastante bien y es muy fácil de instalar.

Perfecta, muy practica, útil, bonita y se ve todo organizado