ECLV 30'' Electric Wireless Remote Control Dining Table Coffee Table Lift,Black,110V-240V,Working Platform Computer Desk Electronic Scissor Lift

I used this inside a cabinet to lift an espresso bar into view. It works quite well for this purpose. The lift comes straight up, so the cabinet can be close-fitting around the lifting platform. I do wish a wiring diagram was supplied - I would like to dispense with the remote and use a switch instead.I also wish that the company made a smaller model. This is roughly 20x30 inches with a 21 inch lift and a 200 pound weight capacity. Their small model is roughly 12x16 with a 9 inch lift and a 40 pound capacity. I need one right between them - say, 16x24 with a 15 inch lift and a 120 pound capacity. That would allow lots of furniture options. Unfortunately, I cannot locate any manufacturer making something in this range.

The concept is awesome. The reviews made it sound amazing. Even after mounting the cables the lift stops working all the time, in the middle of rising. I have to disconnect all the cables, and then try reconnecting them. It will work again for a little while.I built an entire table around this, and the table is done and stained. It took two months of hard work. I can't get this POS to work consistently. Now the remote, which used to have a solid red light, only blinks briefly and then stops.EDIT: The flashing light is the device trying to pair. I was able to repair the remote, but it dropped the connection again. They are sending me another transmitter which may fix the problem. Very, very pleased with their tech support. The device is fantastic when it works so if we can get around this I'll raise to 5 stars.

This manufacturer is messed up and does not stand behind their product. I bought this 30" electric lift in June 2022 and put it together as a pet grooming table. I use it twice weekly, and my dog is still within the weight limit described in the listing. However, two weeks ago, the table was unresponsive to the remote. I emailed the email address that appeared on their outdated-looking website multiple times and called their support number numerous times, hoping to find the solution but has yet to receive anything.This is a good product if it works, but you will be F if it doesn't because nobody will support you, and it becomes a piece of heavy, dark-looking garbage.Update:I was able to get a hold of the seller via Amazon Messaging. Long story short, the seller sent a motor replacement after reprogramming the remote didn't work either, and it is working fine now after a 5 min quick installation. Their customer service team definitely got me to change from 1 star to 5 stars.

I’m very pleased, it works exactly as described, looks as described, listed dimensions are correct. The remote didn’t work out of the box but it’s super easy to reset. I was concerned about how tight the frame was and how loud it was. I have to listen real close,, real careful to hear it at all, and it’s a very sturdy stiff frame, no play. As noted by others, it arrived with the box pretty shaggy, but it was fine inside. Also as noted by others, directions are nearly non-existent, but unnecessary. If you need directions this probably isn’t for you.It took a few cycles to figure out where to best mount the transformer and receiver, and nothing is provided for that, but it’s not a big deal. The transformer will mount cleanly in front of the ram, and the receiver on the ram worked well for me, that way there’s no cords moving except the power cord when it cycles. I can’t speak to longevity obviously, but it looks well made, I’m actually kind of surprised at the quality considering the price. The frame looks like it woud easily handle the 200 lbs rating so I’m guessing the ram is the limiting factor but I don’t know that.

Racking is a process of cyphering wine from the above 5 gal. Carboy to the 5 gal. Carboy on the floor. THEN snatching it off the floor and returning it to the shelf. ( a gallon of water weighs 8.34 lbs. 5 gallons weigh 41.7 lbs.) After a knee injury, I thought better of this.The provided holes in the top were conveniently located for carriage bolts and to fasten plywood. I have yet to figure out what to do with the electronics. They seem to dangle on the floor.

The media could not be loaded.  Utilized this lift for our Ooni pizza oven in our new outdoor kitchen. The lift easily handles the weight of the oven and the heavy granite tabletop. It's a unique way to store and protect the oven and gets lots of compliments from our guests.

I built a top out of food grade stainless steel. I have a 7.5 gallon tank that I fill with honey and then bottle honey. I have so much nerve damage in my back, I cannot lift the 5 gallon buckets high enough to fill the tank while it is sitting on the tables. This allows me to lower the tank, fill it with honey, raise it back up to a comfortable level and fill bottles for hours.

Theatre teacher here! Love having this in my workshop and occasionally on the stage. Very versatile and strong.

Esta mesa elevadora de tijera es una gran solución para técnicos de pianos que ya no podemos cargar la maquinaria del piano por razones de edad o de salud. Sólo es necesario fabricar una base con ruedas que tenga unos 33 cm de altura total y una cubierta de por lo menos 122 cm x 51 cm. El diseño y la manufactura son excelentes y su capacidad de carga de hasta 200 libras (91 Kilos) es más que suficiente. Lo único que no me gustó es que FedEx cobra en efectivo los impuestos aduanales contra la entrega del producto, que en mi caso fueron mil pesos.