Best Choice Products Oversized Padded Zero Gravity Chair, Folding Outdoor Patio Recliner, XL Anti Gravity Lounger for Backyard w/Headrest, Cup Holder, Side Tray, Polyester Mesh - American Flag

This chair is great quality the material seems very thick and durable. It’s quite stable and the size is impressive. It’s not tight. I love the tray feature. There was little assembly just adding the tray table which was a cinch. I recommended

This is the second one I’ve bought. It is really easy to operate, very comfortable, and reasonably priced. I read a post dated July 9th by Sureshoe on this chair and took his advice and have a bit more to add. First, Sureshoe suggested tightening the screws some to prevent the nut from coming off. Great idea. Now, add to that some LocTight/ thread lock compound to the threads exposed as in pic. This will add to the probability of the nut staying on. Second, I took some 3/4” foam pipe insulation (3/4” hole and about 2” in diameter), made a slit along the slit line in the foam tubing and cut four 5” pieces to attach to the corner bottom braces so as to buffer the hard ground or ground irregularities. By protecting the braces this way, the plastic is less likely to wear out or crack. They are attached with two zip ties. Next, I attached about a 20” or so piece of the same foam pipe insulation around the lower part that comes up to meet/hold one’s feet. The pic shows the three zip ties I used…..with…..the pulled out tabs for tightening the zip ties facing downward away from where my legs/feet will rest. Now the chair is, imho, perfect. It rests on padding not wearing out the plastic corner braces, has padding for my feet, and the nuts are more firmly set and less likely to loosen up and fall off. I have owned many of such chairs for camping, porch use, and for hours of sitting at car shows and these are simply THE best I’ve come across. After a while with the “pool noodle like” foam pipe insulation, I replaced them with a denser foam pipe insulation and put a rubber tape on the bottoms to protect the insulation from an abrasive ground. The cheaper pool noodle type foam tended to pop/crush real easily causing me to redo with the denser pipe insulation. I also double rolled with pipe insulation the foot rest so there is no digging into the backs of your legs when resting your feet/legs on it. I used 3/4” ID for the covering of the metal leg piece and 11/4” ID to go over the first covering. Using the next size bigger allows for a more thorough wrap on top of the first. Btw…..when I put the foam on the bar prior to the zip ties, I put rubber cement on the metal bar and the inside of the foam so as to prevent free rolling. I also used rubber cement on the outside of the first foam and on the inside of the second foam all prior to doing up the zip ties. See pics 4-7. This did not take too long to do and is well worth the effort. It also does not cost much to do. Both my chairs have been working great and my long legs no longer get that “dug in” soreness after resting them on the double-padded foot rest while napping in the chair on my porch. Well…..spring is almost here, and my wife decided she wanted one of these too. Yep….I ordered a third chair and got it today. It came quickly and had no damage. I put the lock -tite on the 4 or 5 nuts on each side and it’s ready to go out to the screened in porch soon. Just thought you might like to know that my buying a third one means I really like these. After all, my car show chair (lots of sitting) did half a season last year just wonderfully.

Pros: Overall comfortable, width, appearance. Cons: Not easily portable, lock doesn't stay locked, reclines but not truly "zero gravity". This lounge has just enough padding to add some softness, is a couple of inches wider than the standard lounges so overall is very comfortable. While it does recline it does not go into a fully level feet above heart level. The purple and violet color scheme with the black frame looks great and feels sturdy, but it is heavy, so be aware if you are looking for a lounge to take on the go. Because of it being less portable, it has only been used inside so far, so I can't address the issue others have noted about rusting. The lock on each side supposed to keep the lounge in the chosen reclining position does not always hold and remain in that position. Sometimes I'll hear some random clicks as it slowly slips out of position and I need to readjust myself and put the circle "lock" back into the locked position. Finally, the bottom leg section is too long to fold flat against the chair when in the upright position and stays pointing out 7" from the seat section so getting into it is a challenge for a 5'2" person. I wish there was a face canopy on this model for when it is used outside or at least available to purchase for it, so maybe they can work on that!

Oh my goodness this chair is so comfortable and nice. The chair I had for the last few years was a little cheap chair from dollar general. This chair is big enough for me and I’m 6 feet tall and I weigh around 210-214 it came fully assembled in the box wrapped in bubble wrap and the detachable cup holder holds a phone tablet and two cups, one which holds a coffee cup and one that holds a regular cup. It’s not too heavy and the material is quality, and only time will determine the longevity. With the chair fully reclined it’s too long to have it sitting straight forward on my balcony, but if I turn it sideways no problem 😉 I can use it for sun bathing.😌 I’ve bought from Best Choice before and am still happy with my previous purchase which was from last year so I feel as long as I buy a cover for my zero gravity chair it should last me a good while.

The chair is as comfortable as advertised. My spouse is suffering through a painful bone disease, but still wanted to enjoy sitting outside on the porch during nice weather. The fact the the chair is fully reclinable, lockable in any position the chair is capable of, and as durable as it is makes it a great value. It folds up very easily for transport, and doesn’t feel exceedingly heavy during carry. It would be nice if a carry strap or closure strap were added, but that’s easily solved with a shirt length of paracord. Excellent purchase!

I like this chair, easy to lock in position, packaged extremely well, comfortable and looks well-made I would buy again or recommend to a friend.

My weight is under the maximum rating for the chair and the chair visually appeared that it would support me easily. However, while sleeping in it for the second time in the zero gravity position, which is most comfortable in this chair. I awoke in the night with the back of my head hitting hard against the floor (using it indoors to ensure that I can use it when traveling) and with my right shoulder hitting the frame of the chair (later caused a large bruise in that area). I didn't know what happened, and at 75 years old I struggled to get out of the chair because of my semi-inverted position. After getting up I noticed that the backs of both plastic armrests were torn from their mounts and both mounting bolts were severely bent; bolts that attach to the lower and upper sections of the chair. With that happening, the entire upper half of the chair broke free from those mounts and the upper half of my body tumbled to the floor. My right shoulder was also bruised when it came in contact with the tubular frame with the forced of my body ramming downward against it. After seeing the damaged ends of the armrests and bent mounting pins that supported that upper section, I understood that was why this happened. It's a flimsy mount, poorly engineered by loading up the main back support by using 1/4 inch bolts through plastic. After careful inspection, I noticed that the locknuts on other bolts in the chair were loose, as if they were never tightened fully (the chair comes fully assembled). I thought that maybe the company wanted more freedom of movement when tipping the chair back back, so perhaps they didn't tighten them fully. There is also an issue with the braking mechanism in the chair with the looped-locked finger controls that put a tab into a grooved slot to lock. This is also plastic and it could have caused this near catastrophe to occur had it failed to maintain the lock while the chair is fully back. When the chair collapsed, the inside bolt holes in the frame tubing itself were ripped open, leaving only the outer holes left to support the upper rack, which in-turn gave way causing the upper deck to lose ALL attachment to the base, and fall. I have since rebuilt the chair with sturdy materials and mounts and inserted a new STOP bolt to keep the chair from going too far over-center and collapsing the upper rack the way it did on mine. I don't trust the finger locks the way their designed. I hope the company will take a look at the whole design and re-evaluate their engineering to make the chair sturdy and safer than what it currently is. Anytime someone is leaning back in a zero gravity chair, their safety is highly dependent on the bolts and attachment to the base, plus the unit should have a robust locking mechanism to keep the upper back support from collapsing all the way backward the way mine did.

I love the extra width of this chair. Very comfortable and the color is stunning! It is a bit heavy, so I personally only carry it from my garage to the porch.

A few issues at the beginning with our order getting lost. But having contacted the seller he fixed the situation promptly and resent the chair. Received the replacement quickly. The chair is great and my wife loves it. We will order a second one soon from the same company.