BOLISS 400lbs Mid Back Mesh Ergonomic Drafting Office Chair

I've used this chair at my office job for 7 months, and it still feels brand new. The seat is super thick and comfy, and lumbar support is decent. I have it set to it's maximum height, and it hasn't sunk even a tiny bit. I did replace the casters with a rollerblade-style set, but there was nothing wrong with the original casters - they were sturdy and rolled very easily. (I was just afraid the hard plastic would cause wear on my LVP flooring.) It has a knob to adjust the lean-back tension, a lever to lock the lean at a certain angle, and the height adjustment. You can also adjust the height of the foot ring - but like others have mentioned, it doesn't tend to stay in place, and will inevitably slip back down. This isn't a big deal - even at it's lowest, my feet can still reach it. I'm 5'7", and the chair's maximum height leaves me just an inch or two shy of my standing height, so switching between standing/sitting doesn't require any desk adjustments, which was my main criteria when shopping for a drafting chair. Overall, this is a comfortable, sturdy, and durable desk chair, for a very fair price. Highly recommended!

It's always dicey buying stuff likes shoes, clothes or office chairs online. Those are sort of personal things you want to feel and try out before plunking down your scheckles. But, I took a chance on this chair since it seemed to hit all the key points I was looking for. I must say I am pleased with the purchase. It's a stout chair that easily and comfortably supports a full grown male body (with perhaps and extra pound or two over the average). It feels durable and raises up to let me sit at standing desk level with ease. The foot ring.... Well, that is its weak point both literally and figuratively. But, I think all drafting chairs probably suffer from this. The foot ring has a tendency to drift down no matter how tight you screw down the lock knob. That can be easily overcome though by just setting it to where you want it and measuring the gap between the bottom of the ring and the chair base and cutting a matching length of PVC pipe to slip over the chair post between the two components. Once you have that keeping the ring at the proper height for your legs, Bob's your Uncle, it'll stay in place. The ring is probably also a tad small for most people's legs too. Originally I found that I had to really stretch my legs backwards to rest my feet on the ring. I cut out a wider ring from a quality piece of plywood and fastened it to the chair ring which gives me another 3 inches all around which is MUCH better. But, again, in looking at the specs of other drafting chairs, this foot rest ring size seemed to be fairly standard if not even slightly larger than many others. The quality and comfort of the chair is it's selling point. It can accommodate a 230 lbs man easily.

I'm 6'1" - 300lbs. and Highly recommend! Love this Chair ( and I'm Picky ) 1. Nice wide bottom Seat Cushion. 2. Lean and Lock Back rest. 3. Adjustable Foot Ring Larger ( more comfortable foot position )

I converted my existing, 5' x 5' corner desk to a standing desk. It costs me 1 sheet of plywood and some design/fabrication time, vs. $1000 or more for a new motorized one in the size I require. It just seems like overkill to have a desk all decked out with motors so you can raise/lower it. I figured, just get a chair that enables you to be the same height - standing or sitting. Then there's no need to raise/lower the entire desk. This chair is very close - only about 1.5-1.75" shorter sitting than when standing, but close enough. I may get some upgraded wheels for this chair that have a larger diameter and knock the difference down by half. The wheels that came with it are decent enough, rolls around on my Berber carpet without trouble. This chair feels very comfortable - firm, but soft enough so hours of sitting is OK. Assembly was very easy. I don't like arms on my chairs, so this was another selling point for this one. If you don't want arms, simply don't install them. I like everything about this chair - the mobility, the fit, comfort, back support...except the foot support ring is a bit low if you have the chair at max height (as I always do). As other reviewers have said, if you intend to keep the chair at max height, install the foot ring upside down, so it juts upward instead of downward. Its also a bit small in diameter, but I don't really use it anyway. I have a foot stool under my desk that keeps my feet at a great height, and lets me move my feet around a bit, as if they were on the floor.

I've had two Autonomous ergonomic chairs valued between 300-600 dollars. I swapped to an ergonomic haag valued at 1.1k because I thought it would help my back and posture, I was seriously wrong. Using my "haag" chair, I started getting nerve problems in my arms and hands. I realized that it started around the same time I got my haag chair but I kept using it for far too long, thinking I was crazy. Fast forward to now and I'm looking for another ergonomic chair, only this time it needs to raise its base high because I have a standing desk and typically, their lowest point is higher than most standard desks and won't fit. I looked at autonomous again and found the chairs are now $900+, I couldn't gamble on another chair again at that price, especially when it's through their site and returning isn't an easy process like it is here on Amazon. I found this chair and decided that for its price and being on this platform, it was worth the gamble. This is cheap but the photos looked good, the reviews too so I bought it. I'm honestly pleasantly surprised. The plastic feels about the same quality as autonomous, maybe slightly less. The seat goes high, and I reversed the foot rest (DURING assembly) because I have short legs. Perfect. Overall, I'm getting less pain and I'm hoping it stays that way. My only wish is that it had a sliding rail for the base of the seat and a tilter as well, but those features are found on more expensive chairs, so what can you do. Note there's no headrest, but I was OK with that. I'll keep this post updated if anything changes.

Love this chair. Easy to assemble. Super comfortable. Very durable. Great quality. This is the second one that I have purchased, and both are amazing!

this is a great chair. the cushion far exceeds my expectations. nice back support, functions well, great price.

I just set up this chair, and as a 230 lb guy, I am very happy with it so far. Unusually good assembly instructions for a Chinese product and the quality seems very good. I appreciate it when the parts are shrink-wrapped to a well-labeled cardboard so you can easily know exactly what part is what. Plus they included extras even though I didn’t need them. It includes a small 5 mm hex key, but I used my own longer one that probably saved me a few minutes. The biggest knock I saw mentioned by other reviews is the foot ring dropping to the bottom of the range, but that’s where I started and I like that spot fine. I was wary of buying a drafting chair online given the importance of materials and overall fit for me. I am delighted that it meets or exceeds my expectations!

La silla es lo más cómodo que puedes encontrar, la espuma del asiento es magnífica para largas jornadas sentado. Los descansa brazos también son muy buenos. El respaldo igual, muy bueno. PERO, el gran problema es el aro descansa pies. Además de ser de plástico, pequeño y sentirse corriente, no se sujeta bien y se baja a cada rato al subir los pies. Al grado que ya mejor lo deje hasta abajo y no me molesto en subirlo. Para una persona de baja estatura esto será un gran problema. Ojalá los fabricantes mejoren esto y hagan un aro más grande y de METAL que sea fijo (a una altura promedio como otras sillas) y FIJO. De todos modos, los puntos buenos son los suficientes como para, a pesar del precio nada económico, volverla a comprar en caso de ser necesario. Llevo semanas con ella, a ver que pasa en unos meses.

This chair seems to be very good quality. It is very comfortable, we actually keep it at our dining table which is actually an island that is bar stool height and doubles as a small office on one end. This chair’s height is perfect, fits under the keyboard tray attached to the bottom of the island. It was easy to assemble and the art and back rests are very sturdy and comfortable. For as good as a chair can be, this one is a good find. The good reviews on here are representative of this chair in my view.

Bought this chair to use for my new standing desk. So far it’s been wonderful! Wide seat with enough room for a larger guy. Max height is so high I have to jump up to sit in it, even though I’m over 6ft tall. Minimum height is also taller than normal office chairs, so I don’t have to worry about the piston giving up on me like my last several purchases. Though be warned it may be too tall for non-standing desks. Only downsides are that the foot ring gives up after any amount of weight on it, and just sits at the lowest height. Also it’s fairly squeaky after tons of use. Would buy this again in a heartbeat compared to my last few chairs though.

I got exactly what was shown. This chair is firm and supports my lumber well. It was easy to put together. Did need the two of us for some areas. So far I love this chair.

Bought this for my quilting studio. It’s very comfortable and was easy to put together