Wireless Charging Receiver Qi Charger Adapter for Moto E7 Plus LG G5 Galaxy A40 A41 A42 5G A60 A12 A11 A10e A01 A32 A31 A30 A22 A21s A21 A20e A20 A72 A71 A52 A51 A50 Samsung USB Type C Android Charge

Orderd this Qi-compatible wireless charging receiver/pad for my older phone and it works wonders. Comes with a thin pad with copper coils embedded on one side, with a USB C plug connected to an elbow-shaped cable connecting to the pad. This add-on is thin and relatively unnoticeable. When put to work within a TPU case (see photos), it worked well even with the additional case and magnetic ring added. On the edge, the pad itself is paper thin. In the center where the copper rings are, it's slight thicker but not much (perhaps .2 inch?). There are no self-adhesive material on the back of the pad so if you are to secure the pad to the back of the phone permanently, you will need to use tape, which is easy and the part is widely available. When put inside a TPU case like mine, I can still feel the pad underneath but that's only because I know it is there. Regardless, considering the functionality this adds, the ever so slight additional thickness is negligible and not an issue at all.This pad itself literally takes but a minute to install. Once installed, I tested it on three different wireless chargers and the pad, with the TPU case and magnetic ring, the charging function worked perfectly. My charging station tells me the pad charged at 15w of power, which is magnificent. That means I can charge the entire phone in a bit over an hour, or more than 50% within 30 minutes.Altogether, this is a wonderful additional to my aging phone and adds so much convenience. Highly recommended!

Item was very easy to install on each of two phones and works very well. They both work with the phone cover in place, just as the seller said they would. I'm very pleased with the items.

Does NOT take charge, stopped charging. JUNK

Charger works perfectly fine, but this is not something that will stay stuck to the outside of a case. The flat part that attached to the phone falls right off with the tiniest tug. It's also VERY delicate. Unplug it from the phone VERY gently. If your hands are disabled you will likely not be able to unplug this from your phone.

Phone heats up a little while charging and the plug in part seems a little fragile but it works. UPDATE: stopped working after 3 months for no reason.

UPDATE --- Worked perfectly - but up to 4 months, then it acted more off than on...... I bought a second, and that's working near perfect too the past couple of months....... ALERT; if you're having non-power issues, try a couple of things I did; 1. PLUG your power pad in another outlet and retry charging as may be there's a power issue OR 2. Make sure you push the charger firmly into the phone's slot..... 3. Placing the charging phone in a perfect position is important too it seems. 4. The charger works well up to 4 months (for me this was the case)..... How to use it , as per instructions described on this page;;;; Take out of bag, remove the protective strip on the card's side that will be against the device to be plugged into and charged, before placing on the charge pad usually dead center on the pad and no phone case on it. After charging is activated and if you're specifically checking the phone's battery setting to see the fully-charged time span estimation, wait 10 seconds to verify if the device will charge in the initially calculated time, or change (usually after 10 seconds) to a longer time frame (ie, possibly double the initial calculated time).

The adapter is easy to use and simply turns any phone into wireless charging compatible. Just peel and stick to the back of your phone after plugging it into your phones charging port and your done. We bought this for my mother in law. She can't see the charge port to connect the cord for her phone. Works great with your charging matt or other charging unit.

This worked great, then after a month it just stopped working. The phone charges fine wired, and then I used another phone to verify that the wireless charger is still working fine, it's just this adapter that failed.