DPP Titanium Optic Adapter Plate Compatible with Glock Gen 3 to Gen 5 Standard MOS, Holosun 407K/507K/EPS/EPS Carry, Osight K/S/SE and RomeoZero

Perfect fit. Important that it has a couple of threaded studs to hold red dot. Prior plate that I did not use did not have studs and only a couple of threads from screw to secure sight. And this plate was 1/2 the price and built solid. Would highly recommend. (Glock with MOS installing EPS Carry Red Dot).

I don't know why the description seems to try to make people think this plate doesn't fit just about anything but the holosun, it seems to just be a redesign of the glock MOS plate #04. I have three different optics using the RMSc footprint and they all fit like a glove. The brands I tried were the Osight SE, Votatu, and Arory. All of which are pretty budget models but all of them must be clones of the holosun footprint I guess, because they all fit perfect. I have several plates now from DPP for the RMR footprint for glock MOS, M&P core 2.0 and now this one for the MOS to RMSc. I love thin and tailored they are compared to the MOS plates. The core plates are ok, though they are polymer now. Probably fine but I like these a little better. I haven't had then long enough to speak to durability but they're titanium so.... yeah. Install is straight forward just like any other plate and come in a great little reusable plastic box with an assorment of TORX mounting screws and a TORX L-wrench (T8 I believe) . Though you may need to use ones that came with your platform depending on the optic brand. Cost is fair compared some of the other stuff I see out there. Compared to CH, these are darn right cheap. Usually ~$40 for a titanium optic plate or ~$30 for 7075 aluminum (if they have the version you're looking for). I usually splurge for the titanium just because they can make them a little thinner and still keep incredible strength. I hope they expand the lineup to include large frame glock mos cause I don't want to have a weird gap on the slide using a regular one and the glock plates are kinda meh.

Fits Holosun K series, however it does not fit every “Shield RMSc” footprint optic. I was fortunate to be able to get multiple optics for the holidays to upgrade my pistols. I was a little bummed that the new Vortex Defender series utilized a smaller screw hole than the Holosun, so they will not fit over the DPP mounting posts (no fault of theirs). The fit was tight with the EPS and K optics from Holosun over the post and into the plate. The plate also fit well into the MOS slot. Despite the K series being well regarded to run with factor Glock sights, using this plate with the MOS system still means you need taller sights for cowitness. I ended up mounting the EPS to my Gen5 19MOS and was able to get 1/4 cowitness (part of the dots obstructed) with TruGlo low sights (the one with the set screw in the rear sight). The plate comes well packaged, with three sets of screws — two pairs for the mounting plate, two pairs for the EPS optics, and two pairs for the K optics. I like that they include a backup pair of screws in case you mess them up or lose them. Comes with the torx T-10 tool and a nice plastic case I have two of DPP’s RMR plates and they are working fine. I suspect this will also work just as well. For $40 this is a good deal in comparison to premium pricing by their competitors, and much better than the OEM plates that are included (K plate it not included in the MOS series).

This plate is thin. I was able to use the EPS full-size and still co-witnessed with the OEM iron sight on my Glock 17L. It’s more like 1/4 co witness which I like. Putting on the correct torque and it doesn’t seem to loosen but I only got 100 rounds through it so take that with a grain of salt. It also looks good because it fill in the gaps in front and back of the optic. The price is also right.

Ok, so I was pretty happy with the speed of delivery, the included tools and the way it was packaged. The design seems strong and efficient and the product itself seemed of sufficient quality. The plate did not immediately mount on my g19 MOS slide, was too tight and initially I used a rubber mallet to place it. Initially it looked great. But after I mounted my Holosun eps to it, it was also VERY tight. It was all bolted down to listed torque specs and all was good. Then I started to notice the front of the sight had space between the plate and sight I could see daylight through. I adjusted it several times and couldn’t make it work. Then I had to use fine sandpaper to remove the paint from the front and back of the plate to make it fit correctly invthe MOS cutout. This also had to be done on top of the plate for the sight to mount without binding. It was the binding that seemed to be causing the sight to raise on the front. It’s ok now after I fitted it myself but I wouldn’t do this again and if this holds to 1000 rds I’ll be very surprised. I would find another solution before I tried this plate again. A direct mount would be ideal but until Glock starts using a better sight mounting pattern a custom cut is the obvious choice. ****UPDATE:Ok, so I’ve had this for a few weeks. Once I took off the smallest amount of paint on the leading edge of the plate it did fit perfectly. I’ve put around 500 rounds through the gun and it is not loosening up, which is good. The DPP customer service dept reached out to me and wow, how nice to deal with they were. They wanted to refund my purchase and/or send me another at no cost. I said ok and it arrived within days. I haven’t installed it though as my sight is perfectly mounted and dialed in…just can’t bring myself to dismount it just to install an identical plate. I am very happy with this purchase and do recommend it for Glock MOS applications. Of course direct mount is ideal, but this is working really well after proper fitting. DPP is focused on customer service and I appreciate that these days.

Very good quality . Perfectly fit on G34 G3 slide MOS cut. Easy installation and compatible with OSight SE RMSc footprint. Awesome product.

The plate fit tightly in an G45 MOS slide. I appreciate that the plate came with various optic screws, in labeled bags for different optics. This is super helpful. With this plate I was able to mount and zero a holosun 507k with no issues. Had difficulty zeroing an eps carry. Plate is high quality and came with proper screws so I’m still giving it 5 stars.

Easy to install and has worked great so far! It's stayed tight, hasn't loosened or moved. The included hardware fit perfectly.

Produkt passt perfekt. Aufgrund von Lieferproblemen war der Verkäufer kulant. Vielen Dank dafür!

この商品はアメリカのAmazon発送になってましたが、海外向け住所の登録時にマンション名と部屋番号を表示箇所に記載しましたが、商品の宛先に記載されておらず、一度返送され2度目も危うく返送されそうになりました。 ヤマトさんのおかげで届きましたが、amazonのシステムとしてダメそうです。 集合住宅にお住まいの方はリスクあるので注意した方が良いです。 配達に問題があるので、星一つマイナスしておきます。 あと、この商品自体は問題ないですが、目的としていたbaton g17 gen5 mosにはスライド側のネジ穴が突き出ているので、付けられないです。 スペーサ出してくれないかなぁ とりあえずosightの変換で間に合わせました。

Preis ist etwas hoch, ansonsten passt alles.