Moen Align Chrome Moentrol Volume Control Modern Shower Faucet Lever Handle, Valve Required, T3291

This is a very nice, heavy chrome faucet handle, with a light escutcheon- I updated an old chateau faucet with a standard moen valve (no pressure equalization) and it fit perfectly. Not clear in the description is that it came with the brass adapter required to fit a moentrol trim kit to a standard valve, so I had ordered the adapter seperately and then didn’t need it. The reason for the adapter is that this kit and any for newer valves will have screw holes in the 1:30/7:30 positions instead of two at the same level toward the bottom such as with many 30-60 year old morn valves. Depth is important- where the plumber installed the valve will matter. If it sticks out a lot from the wall, this handle will stick out. The escutcheon mounts based on the wall- the handle mounts to the valve, and therefore the valve determines how far it will protrude. With the old lucite moen chateau kit, it looks fine protruding, but maybe not so much with kits like this. In the shower I installed this in, it looks fine- in the other bathroom, which valve protrudes by more than an inch, it would look ridiculous. For older standard valves, this is a nice upgrade if the valve doesn’t protrude too much. The old lucite helps mask protruding, this will not.

WOW, I can't stop staring at this trim kit for my Moentrol shower valve! I had a different trim plate installed for the past 10 years, and have been quite happy with it, but when I saw this one on Amazon, it matches my cabinet pulls and the style of my bathroom faucets much better than my prior trim kit! Looks so classy and cool, only minor issue I've noticed is that water spots (hard water in So Cal) show up on this, unless I wipe it dry after taking a shower. Since this looks so cool, I feel like I need to keep it clean and spotless. I plan to get another one of these to install in my guest bathroom!

I replaced all of my old trim with genuine moen parts and it looks fantastic. Everything was pretty straightforward to install as long as you take your time and have basic tools. I would highly recommend.

If you have the old pull to turn on moentrol knob then this is for you. Update the look without getting a low flow new piece of junk. Keep the high flow and get a modern look with this one. You may need the valve adapter that some other reviewers mentioned. I needed it on one shower but not the other.

It does stick out too far. My husband said he could fix it that probably people were not installing it right but when we got it we understood that everyone saying it sticks out too far was correct and there’s nothing you can do about it. Other than that it works very smooth the cold and hot symbols are hard to see unless you are looking for them.

Our house was built 1969 so we had old Moen shower valves with screws at 5 and 7 o clock. I bought some Danco trim kits but they are plastic and looked bad after a year. I called Moen and they gave me 3 kits that fit these old. This is made for other type withhold water stop or you can take off the stop and use it on Moentrol (pull on, left hot, right cold). To get the handle at right distance I ended up using my old handle arm. All valves maybe different distance from tile so you may have to improvise. The handle is solid, the back piece is a little thin but there aren't a lot of choices if you don't want to solder in a whole new valve. Nice upgrade worth it.

I needed to shave and file down the plastic adapter in order to allow it to rotate without rubbing against the stop tube. The handle sticks out too much exposing the stop tube as well. Definitely is not worth the price.

Caution - this does NOT fit older Moentrol valves where both mounting screws are under the handle. If you have the staggered screw setup (at roughly 7 o'clock & 1 o'clock) this will work. But the older style with 7 & 5 o'clock screw hole positions does not fit. Super disappointing, as quality trim kits for this antiquated valve seem pretty much completely discontinued. Danco makes one, but it is very chinsey.

My only complaint is the price. The selection is very limited for Moentrol valves if you don’t plan to change it to a posi-temp. So the price is what I will pay. I originally wanted to get a valve trim set but that’s okay. The valve is a pull out and then adjust the temperature back and forth style handle. The quality of the valve trim is good and it’s super easy to adjust. Everything was very simple to install that I didn’t need to use the instructions. Overall, this valve trim is way better then the plastic handle that I had that looked like it was from the 90s

Expensive. Fingerprints from install do not come off

Good looking with great quality . Of course it's Moen !

Needed a moentrol assembly so this fit the bill. Not happy about the cost as the exact model in chrome was 60% cheaper. I needed brushed nickel.

I recently installed this Valve Trim in my bathroom and I'm very happy with how it looks and functions. The chrome finish gives it a sleek and modern look that fits perfectly with my bathroom décor. The valve operates smoothly and is very easy to adjust to the desired water temperature. The only reason I'm giving this product 4 stars instead of 5 is because of the installation process. The instructions were a bit confusing and it took some trial and error to get everything properly aligned and securely installed. However, once I figured it out, everything worked perfectly.