FUNPOLA 3D Wood Puzzle LED Tower Clock, 3D Puzzle Building Desktop Clock Model DIY Architectural Building Blocks (LED-TC01 Wood)

Pictures can't do this puzzle clock justice. It has beautiful detail. It only took me a few hours to put together the lights and clock work perfectly although I did have to replace the battery in the remote( type 2025) and you will need 1 AA battery. The quality of the wood is quite good. Everything came out of the molds very easy all the peices were there and clearly marked. I found that it works better for me if I blow up the photo instructions, but thats just my personal preferance...all the parts went together without having to any sanding. It was great. I've put other wooden 3d puzzles together where the instructions were just a mess but these were great. I will absolutly be purchasing more from this brànd. Matter of fact I'm looking for another one now.

This Tower Clock puzzle was fun to put together and looks impressive. This was the 1st wooden puzzle we have put together. I think the instructions could have been a little better in regards to putting the clock hands on and inserting the LED lights. If I were to criticize one thing it would be that all the LED light colors appear to have a green tint to them even the red and orange. Some reviews mentioned the clock running fast or slow but ours is accurate.

The first thing that struck me about this kit was how unbelievably easily the parts popped out of the sheets of wood they came from. Even tiny detail pieces that I was ready to have to glue back together weren't a problem. Very nice. The instructions were just a step by step pictorial but even where not immediately clear were far from impossible to figure out. Another review warns that the thin film over the parts needs to come off before you try to assemble the kit. That's not something I would do! That film adds detail and interest to the finished clock. There were a few parts that were uncomfortably tight. In order to be sure I wouldn't press too hard and break something, I took a hobby knife and scraped the edges off the corners of the tabs to trim them a bit. This was no problem. Lastly, another review complained that the numbers stamped onto the parts weren't done right and ended up being visible in the finished clock. A lot of the parts came in pairs - left to right, front to back that sort of thing. If you aren't careful, a left hand part put onto the right side could end up leaving the number showing. But just plan it out as you go and you'll find the kit goes together just fine with no numbers showing. This isn't identified in the directions and maybe having built things like this before made it clear enough for me. Maybe the directions could be more clear about this. My take on this kit might come from having done a few in the past, but from my perspective this is a top-notch (no pun intended) kit.

This puzzle is so unique. It works, it is a reasonably hard build, and it is beautiful when done. My 17yo put it together in, what I think, was the perfect amount if time. It does not look like a puzzle at all when complete and will become part of my decor.

First of all make absolutely sure you strip ALL film off parts before you assemble them. Its extremely hard to remove it after its assembled and it won't go together well. Pay particular attention to little pieces left on the surfaces. The small tool cuts into your hand. After awhile I had to use the file in the kit to pull the film up. That made marks in the finish but starting in a inconspicuous spot helped. The gloves provided were too small for my big hands but surprisingly were usable although I found them to be in tatters halfway thru the build. I started the build without glue because the instructions implied it was a option. After the entire thing collapsed halfway through the second time I started using very small amounts of glue. The face of the clock gave me a hard time. Pay attention to sequences because the face shield assembly won't go together if you don't follow it. The leg assemblies are difficult and the face assembly o the clock which is last was a real pain to twist lock on. I was fileing and even resorted to a little oil so it would twist and lock. Altogether this was challenging and I enjoyed it. I don't know about a ten year old putting it together. Seems a bit young. Two final words. Be very very careful stressing any parts because they are very brittle. I broke a tower when the cord slid a cross it. However, broken parts mend well with the glue. Lastly, there is no way to contact the company. No phone number, e mail physical address. Oh one more thing. Left over parts. I don't know if they gave me extras or i missed to put them in. I double checked the instructions twice and the thing looks and stands fine so hey in happy.

Lived doing this. Was easy to put pieces together. Some kids are very hard to get pieces in the whole. I love the lights. Sits on my mantel. And keeps good time

So addicted to making these. I love them so much I made 2

I bought another puzzle clock, and this one has unfortunately been been a much different experience. The directions aren't as clear. The pieces are harder to manipulate, and fall out of the sheet before your ready for them. I cannot recommend it for youngsters at all. Instead of it being a fun afternoon activity for a couple of adults (like the other one), it's taking us weeks of it being spread out on the dining table while we do a step or two at a time. If I can ever put my finger on anything else that sets the two puzzles apart, I'll update my review... but it's just not enjoyable. Part of the dissatisfaction might be that what we're experiencing putting it together doesn't give us a lot of confidence that this thing is going to hold together and work once assembled. I wish I'd gotten 2 from the other company, but the return window has closed, and how do you return a puzzle thing like thisafter you've assembled enough to know it sucks, right? Save your money.

It has been an incredibly rewarding experience, as a lover of intricate and engaging projects, this puzzle exceeded my expectations in terms of both quality and enjoyment. The wooden pieces are precisely cut and fit together seamlessly, creating a sturdy and impressive tower clock. The detailed instructions made the assembly process smooth and satisfying, offering just the right level of challenge to keep me engaged without feeling frustrated. One of the standout features of this puzzle is the built-in LED lighting, which adds a beautiful and mesmerizing glow to the finished piece. The combination of the classic wooden design with modern LED illumination creates a unique and captivating display that enhances any room's ambiance. In addition to being a fun and fulfilling project, the tower clock is also functional. The clock mechanism works perfectly, providing an elegant and practical timepiece that adds a touch of sophistication to my home décor. Overall, the LED 3D Wooden Puzzle Adult Tower Clock is an excellent investment for puzzle enthusiasts and those who appreciate the blend of craftsmanship and innovation. It offers a delightful and immersive experience, resulting in a stunning and functional work of art.

Me ha gustado montarlo, en algún momento se complicó, pero al final, gané yo y una vez terminado ha quedado un bonito reloj con las luces

Den var lätt byggd och mycket fint utförade. jag tycker om denna moddellen

Facile à monter et très beau résultat donc je recommande.

Si anteriormente habías montado algún puzzle de este tipo, la dificultad es baja. Si, por el contrario, es la primera vez que compras un puzzle de madera en 3D, entonces la dificultad aumenta a media-alta. Nosotros (mi mujer y yo) ya habíamos hecho puzzles de este tipo anteriormente, por lo que nos ha resultado muy sencillo hacer este. En cuanto nos llegó, nos pusimos manos a la obra. En menos de 2 horas lo habíamos terminado. Aunque la mayoría de piezas son fáciles de poner, lo que más nos costó fue poner la tira LED. Hay que tener mucho cuidado para no dañar los circuitos eléctricos. La tira LED le da un toque espectacular. Ha sido muy buena idea incluir ese detalle en este puzzle. Sin la tira, no hubiera sido lo mismo. El puzzle, una vez montado es muy, pero que muy bonito y original. Como podéis observar en el vídeo que he subido, las luces son RGB, así que puedes poner el color que quieras o hacer que cambien automáticamente. La tira LED es larga, por lo que te sobrará algunos centímetros y deberás cortarla por la línea que marca. Necesitarás un adaptador para poder enchufar el cable USB-A a la corriente. No me ha gustado que la luz LED venía con la tira adhesiva un poco despegada. Debido a esto, ha costado más ponerla, ya que se enganchaba y pegaba a la madera en algunas zonas. Pero, como he dicho antes, con paciencia se consigue. Realmente necesitas paciencia para todo, no sólo para la tira LED. Hay que tener mucho cuidado a la hora de sacar las piezas de madera, ya que algunas son muy finas y se rompen con mucha facilidad. Las instrucciones son mediante dibujos. También incluye alguna que otra frase en inglés. Paso a destacar algunas cosas importantes de las instrucciones, por si os sirve de ayuda. 🔵 Los números en azul, indican el paso. En total, hay 35 pasos a seguir en este puzzle. 🟣 Los números en morado/rosa indican el número de la pieza. Si observas bien, en las planchas de madera verás que cada pieza tiene un número. Pues debes colocar las piezas que te indique en cada paso. Además, también se dan algunas instrucciones extras en color rosa. Por ejemplo: 🟣 PMMA: es el círculo de plástico transparente. Antes de ponerlo, hay que quitarle dos pegatinas que trae: una de color marrón y otra transparente. La transparente cuesta quitarla, pero tenéis que hacerlo. Si no la quitáis, luego el reloj no se verá bien. 🟣 Line: Indica que debéis fijaros en los detalles y colocar las piezas por la cara correcta. Esto es importante ya que, si no os fijáis en estos pequeños detalles, algunas piezas quedarán por la cara al revés y el resultado será horrible. 🟣 “Please press it tighly”. Esto significa “por favor, presiona con fuerza”. Se indica en el paso número 6 y quiere decir que esas piezas debemos encajarlas con fuerza, aunque con delicadeza. 🟣 LED: es por donde tiene que pasar la tira LED. Fijaos bien, ya que los LED deben quedar mirando hacia fuera, tal y como aparece en los dibujos. También se incluyen instrucciones de cómo montar el reloj. Aparecen en los pasos 18 y 19 y también en una hoja aparte. Por cierto, funciona con una pila AA, que no trae incluida. ⚠️ En el paso 24, se usa la pieza 10. Esta pieza es flexible, así que no os asustéis, ya que se puede doblar sin que se rompa. Como decía al principio, es un puzzle bastante entretenido y que, una vez terminado, queda espectacular. Debes tener paciencia. Aunque las piezas son delicadas, en su conjunto, una vez armado, es bastante robusto y firme. Si te gustan este tipo de puzzles, recomiendo hacer este. Te encantará.