FlexiSpot E6 Bamboo 3-Stage Dual Motor Electric Standing Desk 55 x 28 Sit Stand Up Desk, Holds 220 lbs, Adjustable Height w/ Memory Presets, Solid Bamboo Desktop & Black Frame, Ships in 2 Boxes

Just finished assembling my new bamboo top, adjustable height desk and I love it! (See pics. Only thing left to do is stow away the wires). Its clean lines and gorgeous bamboo wood top are simple yet elegant. The push-button motorized lift works great, is quiet and smooth, and I think the height flexibility will likely make the desk more comfortable to use. Just a few things of note… first, shipping - I think they should make it more clear that the metal base and the wood top will likely not arrive on the same day. They do say the desk comes in two packages but they don’t say (at least not as of this writing) that they’ll likely come days apart. It’s also not good that though they posted realtime shipping status online on the first piece, they didn’t post anything at all on the second so I wasn’t sure when the second box would arrive. (Not a problem for me as I’m home a lot but could be a problem for those who need to know when a delivery is going to happen). Second, I think they should make it more clear about the fact that though some of the starter holes in the wood top used for attaching the base are pre-drilled (the ones that are consistent no matter which size desk you order) you will have to drill some of your own holes that are specific to the desk size you’ve chosen. But that’s not a huge issue if you have your own drill. I happen to be a 5’3”, 70-year old gal and didn’t have any problem with assembling my desk in an afternoon by myself because I do have a drill. Third, the other surprise was that my bamboo top was supposed to be completely solid (at least that what the pics showed and there was nothing in the description that said otherwise) but when it arrived it had two, 2.5” electric cord holes drilled in it - near the top, one on the left, one on the right. (Not that distracting so going to live with it for now and see how it goes). The desk is heavy duty, rock solid with not even a hint of a wiggle, even at full height. A really solid, functional, and beautiful desk.

There’s a couple spots in the assembly instructions that could have probably been less vague. Other than that, it was fairly simple to assemble. The 55”-long table is perfect for a larger (non-pro) single 3D printer with enclosure and a decent sized filament dryer. It’s “150 lbs” weight is plenty stable to keep my printer from doing the “Jailhouse Rock” and taking the whole table with it. Performance of the mechanics of the table were smooth and silent. The controls were intuitive - very easy to use. When assembling, use a finishing nail or something similar to line up your pre-drilled holes in the table top with the attachment holes in the frame. Check your alignment again with a metric tape measure (5.5cm from the edge of the table. It’s easy to misalign your base/legs if you don’t take a little extra care during assembly. The black legs with the bamboo top is awesome. Bamboo is a fabulous and entirely renewable resource that looks really amazing. And it’s weight adds to the ability to hold the table down under vigorous printing. I’m 6’3” tall and am at the point where I’d prefer not to have to bend over to tinker with my printer. It comes up to a perfect height for me standing straight up. And since I have no reason to lower the table, I’ve got LOTS of extra room UNDER the table for a filing/3D tool cabinet and plenty of filament spool storage. Now I’m just waiting for my “all-metal” hotend (AnkerMake M5) to arrive so I can install it and get back to printing. I left a print going overnight and it started collecting filament on the nozzle. When I awoke, there was a golf ball-sized wad of cooked and cured PLA encasing my hotend block and nozzle. In trying to heat and break off pieces of filament, I yanked out 2 wires that gave me an instant “Heating Error”. I was hoping to buy regular M5 hotends when I found the all-metal version. Just waiting now. Standing Table is awesome! Every bit as good, so far, as my wife’s more expensive version.

I"m short. Now my desk can be adjusted to a height that fits me perfectly. Its good quality, looks very nice. The top as one big piece comes as a separate package (potentially different day) and is lacking some predrilled holes in the middle. I am not risking drilling myself, and just ignored it - it holds perfectly anyway, but kinda lame.

You'll have to buy a drill and a 3-inch Philips bit because the mid-section is not drilled. If you want a custom spot for the AC adapter, you'll have no extra screws, and they strip easy. Hopefully the mid-section can work with one missing screw. For some reason they chose to have the midsection hollowed out, but if it had some holes cut in the sides and a bottom cover, it'd be a lot easier to hide the cables. You get four sticky tabs to hold sections of the cable to the desk. It functions the way it's supposed to and the desktop is nice.

This beautiful standing desk took a little while to assemble as I had to take my time but it was well worth it! The motors are very quiet and the bamboo top is one solid piece which shipped separately from the base. The base is very sturdy and quite heavy. There are pilot holes on the bottom side which helps the installation and installing the screws. At first, I found it a little tough to assemble and I occasionally had to walk away and then come back later to build the desk in stages. When I was done, I was completely satisfied and love my Flexispot Pro standing desk. The 55 x 28 inch standing desk is wide enough for my LG 48 inch C4 OLED TV that I use as a computer monitor and it easily hold it up with a bunch of gear. Ikea standing desks were much more expensive and of lower quality. The Ikea hand crank standing desk cost about the same or slightly more than the Flexispot Pro Bamboo 3 which means that the Flexispot desk represents an excellent value.

Amazing customer service. Great product at an affordable price. The desk is very sturdy (both the frame - especially given it is an 3-stage frame - and the bamboo desk top). Putting it together was easy. I am short so it’s hard to find desk that fits my height and this desk lowers all the way down to 23.6 inches which is great. Have been working standing up more with this great product.

We ordered this and only received 1 of 2 boxes. We received the desktop, but none of the rest. Customer service was terrible. We got the rest of the desk parts a week later. We were offered a $50 credit/refund but we never got it. The desk is great, but Flexispot has been terrible.

Very good table. Looks very cute and very stable

Relatively was easy to assemble. Works properly.

Have been using this desk for 6 months and am quite happy. Setting it up was not difficult for us, as we always have a power drill at home.

Donde esta la mesa? solo me llego la base.

I was a bit apprehensive of spending the extra money on this desk compared to some of the cheaper options, but everything about this desk is spectacular and money well spent! - The base and Top were delivered separately (by a day) and both were packaged SO well. Lots of padding and protection. I appreciate that level of care to get the product to the consumer safely. - The base is built like a tank! It's heavy duty. It was easy to assemble with the given tools/hardware. - The top is beautiful. The color is great. The finish/feel is great - perfectly flat as well. If you like bamboo at all, this is a fantastic choice. Remember that this is solid wood, which is why you are paying a premium. - The dual motors operate nice and smoothly. It's pretty quiet. The previous review mentioned that the motors sound a bit like they are struggling when moving the desk up - which I agree with, but it doesn't appear like it's struggling it all. Just sounds a bit more laboured, but still quiet. - The only stress inducing part (for me) was attaching the top to the base, and that's my OCD speaking. I had to use toothpicks to align the holes in the base to the holes in the top while adding the screws, just to keep everything square. It was probably overkill. - Overall, this might be one of my best Amazon purchases ever. Highly recommend this desk and seller!

Overall a solid desk. Looks clean, feels sturdy, and the height adjustment motor is impressively quiet - no complaints there. The one issue worth knowing about: it shakes. While sitting, it's manageable - typing is fine and the monitor stays stable, though even writing with pen and paper is enough to make it wobble. Standing mode is where it's more noticeable; even regular typing causes visible shaking, and it's hard to ignore. If you're primarily using it seated it's a great desk. Just temper expectations for the standing experience.