CGOLDENWALL Turbine Flow Meter LCD Digital Display Flowmeter with 1-Inch FNPT Inlet/Outlet, Gas Oil Fuel Flowmeter for Diesel, Kerosene, Gasoline 2-26.4 GPM (9-100 LPM)

Producto cumple las expectativa

The frist 1 I bought did not work at all ,they replaced it at no cost, an it works awesome, we pump approximately 400 gal water threw it daily,(((( Love it))))

Installed the 1” meter on a 1” pvc main pipe going into the house. Ran water inside house through a faucet. Meter didn’t read a flow rate or gal used. Calibrated again and again trying to get it to read usage and it wouldn’t. Now I’ve wasted time and money.

Updated 4/30/24 3hrs after install in a closed system, radiant heating system, it developed a load rattle. Readings dropped from 7.2 gpm to 6.6. Now I have to undo it from its NPT couplings to look inside and see what happened. Follow up: Removed the unit and inspected the rotor. It was unbalanced by a small blob of teflon pipe seal compound from one of the joints in the system. Replaced the unit and everything works as expected. Note : the NPT threads are a fraction large and the NPT connector "bottoms out" before making a tight enough seal. I filed the male connector slightly and reassembled. All OK now!

Perhaps the use of this with pvc plastic would be much easier. But, I was using stainless steal. I probably redid this product 6 times. I usually do 3 rotations with the tape then putty on pipes. One side took 9 rotations and the other 12 with putty to finally stop dripping. Otherwise the flow and digital aspects of the product appear working.