FENRIR Motorcycle Bar End Mirror Handlebar Mirrors Black Round CNC Forged Aluminum Alloy Anti-glare Vibration-reducing design Curved lenses For Street Cruiser Cafe Racer Scrambler Heritage Roadster

I wasn’t sure if these would work, but I saw another reviewer say they put them on their scout bobber sixty. I have a 2020 model and I can confirm they do fit. They look sharp. And installation was very easy. Just need to cut a small hole through the rubber at the end of each handlebar and they screw right in. I haven’t taken them for a ride yet, so I can’t comment on vibration but they seem like they should work fine. I put mine below the handlebars and I can see just fine. My arms really don’t get in the way at all. As long as you position them properly, they don’t knock against the tank. They are also slightly tinted if that makes a difference to you. Overall, I’m very happy. I hope they hold up. Update: vibration is not bad, but I did need to add a spacer on the throttle side because the mirror would twist with the handle. Added a few small washers and problem solved.

I can confirm these mirrors fit a 2024 husqvarna 401 svartpilen with no significant modification. These mirrors come with several adapters to ensure they fit a wide range of motorcycles. The mirrors mount securely without any significant vibration even at higher speeds (which is notable since my bike is a "thumper," i.e., single cylinder motor). The powder coating is good quality as is the mirror itself. It does, in my opinion, notably improve the bike's aesthetics and looks like it could be factory/OEM. Keep in mind, you'll probably want to fill in the bolt holes that will be open once you remove the stock mirrors (they sell inserts, but I just used some new bolts I had laying around which I painted black to match my handlebars).

Overall very pleased. These went on my 08 R1. A thing to note for most Yamahas: The instructions tell you that you must remove the factory clip-on insert. DO NOT DO THAT. Not only is the factory insert incredibly difficult to remove without destroying the handlebar, there is no reason to remove it. Simply omit the internal bar adapters (the silver tubes) from the new bar end and just bolt the bar end directly the stock insert with the included bolts. It couldn’t be simpler. No shims or washers needed and there is just enough clearance for the throttle side grip. Couple complaints: The holes for the mirrors that are drilled into the mirror bracket were drilled at the wrong angle. This caused the mirror to not sit flush and the mirror would quickly come loose. I had to use a drill to open up the hole so the bolt could seat correctly. (see photo) The other issue with installation is there are no flats on the mirrors pivot to hold it when tightening the mirror to the bracket. The entire mirror will just spin. I had to use a pair of pliers with the jaws wrapped in a towel to hold onto the mirror pivot get enough torque on the bolt to be tight enough to not work loose. Other than that, great valve. The glass is perfectly usable. I wasn’t thrilled with the blue coating at first but for night riding I’d say it’s actually an improvement. The tension of the mirror pivot seams perfect and I don’t see them moving even at high speeds. Highly recommend.

When I bought my used XSR900, it had one stupid little side mirror. Not wanting to die, I realised I needed to see the cars around me. I got these because they were a good price, aluminum, and had good ratings. I'm really glad I did! They can be mounted facing up or down, I chose up because my bars are somewhat high. Installing was.. Annoying. The throttle likes to move the mirror as you twist, so you'll have to install it with a gap, which is obnoxious to do, but not an issue once it's installed. I have found that they like to move over time unless the screws are REALLY tight. Lock Tight is a must too. Once install is done, they're great though! They have a slightly blue tint to them, which doesn't affect anything, that I think makes them anti glare. The anti glare is incredible! I didn't even think about it until one night I realised I hadn't been blinded by car lights in a while. It really works! They're also easy to adjust, stay in place once adjusted, have a large range, and are real glass! For some reason I can't add a photo to this review, which is a shame because they look great!

Great little mirrors, big enough to see behind you without being obnoxious. The blue isn’t distracting. Yes, they come as a pair. These are convex, not flat, to give a little more visibility. Much better than the stock Mickey Mouse mirrors that let you see your whole shoulder. The mirrors hold tight at the ball joint and adjust without moving the whole mount. For anyone on a Moto Guzzi with our funky threaded bar-ends, the included screws match the threading so this is an easy bolt-on solution. The machining isn’t perfect and I’ve only had them for a few months. For quality, I’d give it four stars. For value, they’re fantastic considering that they cost just over $20 a piece.

The right-side mirror was defective...too blurry. I was not able to see objects from the mirror. I reached out to Fenrir customer service and they refuse to accept responsibility. I provided my phone number but they never called. They asked for the part number and photo, and I sent both. The photo did not include an image of their laser ID name, so they suggested that I may have obtained a fake product. I then sent them another image containing their laser ID name on the mirror but they did not respond. I purchased the item from Amazon, so Fenrir refused to send me an exchange since it was not purchased directly from them. Now, I lost the labor fee that I paid to have the mirrors installed. I would not recommend buying from this company. They refuse to back their product. The quality of the items being sent to the customer are not being inspected. The buyer is taking a big risk by purchasing from this vendor.

Great product! A fraction of OEM. Come with multiple parts for many bikes. Looks great on my 2023 Svartpillen.

I order this mirrors to installed on my Indian scout so far installation is easy, mirrors are good quality materials, but the angle of reflection is a bit narrow is hard to see the next line and your line with out having to move your head around, that’s not good in New York traffic

Perfetti e belli da vedere , compatibile con Zontes g1 , facili da montare.

Para mí continental GT excelentes!, muy buena calidad de materiales, construcción y visibilidad, quizá sean un poco más pequeños que los originales de agencia pero los recomiendo como mejor alternativa.

Mirror moves by wind and no way to adjust it except by removing mirror glass by breaking glue!

PERFECT fit and excellent upgrade for my Husky. Would 1000% buy these again.

Produto de qualidade. Chegou como descrito. Fácil instalação. Atendeu a espectativa.