DYNASTY PROAUDIO WSA-5TR-V2 Wireless Audio Adapter/Subwoofer Kit (1TX+1RX), Ultra Low Latency, Dual Band 5.2/5.8GHz, Easy Setup for TV/PC with Powered Subs & Active Speakers.

Good product. No delays in sound delivery. When I first set this up no sound could be heard. then I realised that there is a transmitter and a receiver. So be sure not to connect the transmitter to the subwoofer instead as they look identical.

No setup required, works right out of the box. My setup requires them to be around 10 feet apart, they connected right away. Noticed no signal delay between receiver and subwoofer. Great substitute for the much more pricey SVS offerings.

Works great, crisp audio to the other side of the room. Much less delay than previous wireless audio solution.

Excelente!

I've only had this for 2 days now, but this is amazing. I am using this for a 3rd subwoofer (The other 2 subwoofers are hard wired) I have on my Home Theater system and it works great. No latency to speak of. No sound issues. I am very impressed. Volume level and everything is about the same as when I had the subwoofer hard wired. I did re-calibrate my speakers to make sure all level were good between the 3 subwoofers, but that is expected. There are only 2 gripes I have; but they are minor and don't take away from the product. 1st: It would be better if they labeled TRANSMITTER and RECEIVER better on the units. When I first installed it, I accidentally put the receiver unit at my audio unit and the transmitter unit at the subwoofer. That obviously doesn't work having it backwards. I guess I was a little too excited and didn't read more carefully which unit said transmitter and which said receiver. 2nd: No where in the instructions does it say how to CHANGE the frequency from 5.8 ghz to 5.2 ghz. I have a very intensive wifi network and I did notice a small amount of interference with my network. It was small, but noticeable. No where could I find a switch or setting to change the units to 5.2 ghz. By default it connects on 5.8 ghz. And it pretty much auto connects out of the box, so I didn't have to do anything. But after a lot of research from people reviewing this item, I discovered that if you press AND HOLD the "Pair" button on the receiver unit, it will start blinking and then start blinking GREEN (Meaning 5.2 ghz). Then I press and held the "Pair" button on the transmitter and it too changed to GREEN (Meaning 5.2 ghz). So all is good now. I just wish they had this information in the instructions. I tested powering down the unit and when the power was restored, it stayed "GREEN" 5.2 ghz. So all in all, this is an excellent unit. My research shows that "internally" this unit is the exact same as the KEF KW1 wireless unit. Could be the 2 companies working together or getting it made from the same manufacturer. Either way, this unit works great; great price; lowest latency of all I have checked on. I should point out again, that I have only used this for a subwoofer. Technically it will work on ANY SPEAKER as long as it is a POWERED SPEAKER. So technically, you should be able to use it for surrounds or rears if you can't get wire there. But I can't comment on how good it will be. Specs say no problem with frequency response; but again I only use it for a subwoofer. I highly recommend it. If I run into any problems with this unit, I will definitely add a change to my review.