Amazon Basics Wireless Phone Charger Stand, 10W Qi Certified with USB Cable, Compatible with iPhone 16/15/14/13/12/11/X, Samsung & More, with USB Cable, Black (No AC Adapter)

It’s simple and works. Old school slow charging - even with high power transformer plugged into the wall. In that case, I may plug the usbc directly into my phone. As this is more of a desk phone holder for me, this system works fine for me, but the wireless charging likely is too slow for some folks / uses.

The charger is amazing! It works for both android and iphone so it allows my wife and I to use the same charger in common areas. I have no complaints for the charger. We now have 2 of the upright and 1 of the pads by Amazon Basics.

The "Welcome Guide" which was essentially all picture showed the charging stand attached via the supplied cable to a generic wall charger. It said, "only use QC3.0/PD3.0 charger from a reputable manufacturer." The folded paper that also came with it also didn't show or talk about what kind of charger this stand likes or needs. I currently use an Anker A2669 wall charger (a fairly standard wall charger that has two USB-C ports and one USB-A port; I think that Anker qualifies as THE most reputable wall charger manufacturer) connected to an Anker 313 charging stand, which works fine, but it takes a micro-USB cable rather than an USB-C cable like this Amazon Basics one. I was hoping for a charging stand with a USB-C connector; that way if I need a quicker charge I can take the cable out of the charging stand and plug it directly into the phone. And, every time the Anker 313 charging stand gets hit by a powerline glitch, it starts blinking green and I have to pull the cable out of it and insert the cable again. (Standard tech support advice: "Do a power-off reboot of your device!") After this it works fine until the next powerline glitch. I used the provided USB-A to USB-C cable to attach the Amazon charging stand to the USB-A port on the Anker 2669. The Amazon charging stand light turned on, a dim blue. I put my phone (Samsung S24+) on it, and it started charging. Yay! But then about a second later, the light started blinking bright green. I looked at the manual and this said, and I paraphrase slightly, "AAAAAAHHH! NOOOOOO! I can't deal with this wall charger! StopitStopitStopit!" ("Incompatible Charger") I tried this several times to make sure it wasn't a one-off. Nope, happened every time. And this charger supports PPS, which is a backward-compatible enhancement to PD3.0. I also tried this on an Anker 2039/523 which also supports PD 3.0, and the same thing happened: blinking green light, refusing to charge. I tried plugging it into a USB-C connector on the back of my PC. The stand blinked blue but wouldn't charge the phone.

My current phone is only a few years old but it’s getting harder and harder to charge using the charging port. I’ve tried cleaning it and blowing it out with compressed air but the contacts don’t seem to be connecting much anymore. This isn’t really an issue if you have a wireless charger. This is my first one but it seems reliable. It takes a few seconds to begin charging once it’s on and it may charge a little slower than a wired connection but I’ll take that over inserting the cable a dozen times hoping it works at all. And since it’s angled you can still use your phone while it’s charging if you need to! And it’s cheap! Win win I say. Recommended.

I highly recommend the Amazon Basics 10W Qi Certified Wireless Charging Stand to anyone looking for a reliable and convenient way to charge their Qi-enabled devices. Its efficient charging, sturdy design, and ease of use make it an excellent addition to any desk or nightstand. The only minor downside is the lack of an included AC adapter, but overall, this charging stand offers great performance and value. Initial Impressions: Packaging: The product was well-packaged and arrived in excellent condition. The stand and USB cable were securely protected. Delivery: The delivery was prompt, and the product arrived without any damage. Product Details: Features: This wireless charging stand is Qi certified and offers 10W charging for compatible devices, including various iPhone models (15/14/13/12/11/X) and Samsung phones. The stand comes with a USB cable but does not include an AC adapter. Quality: The overall quality is excellent. The stand feels sturdy and well-made, with a sleek black finish that looks great on any desk or nightstand. Ease of Use: The charging stand is straightforward to set up and use. Simply connect the USB cable to a power source, place your device on the stand, and it begins charging immediately. Performance: Charging Speed: The stand provides efficient and fast charging for compatible devices. The 10W power output ensures your devices are charged quickly and safely. Stability: The stand is stable and holds devices securely in place. I used it exclusively in the portrait position and found it to be very stable. Compatibility: The stand works seamlessly with a wide range of Qi-certified devices, including various iPhone and Samsung models. It worked perfectly with my Samsung S20. Indicator Light: The stand features an LED indicator light that shows the charging status, which is helpful in ensuring proper alignment. Specific Experiences: Pros: Reliable and efficient charging performance. Sleek and modern design that fits well in any setting. Easy to set up and use with a simple plug-and-play design. Stable and secure holding of devices in the portrait orientation. Compatible with a wide range of Qi-certified devices. Cons: The stand does not come with an AC adapter, requiring you to use an existing one or purchase separately. Improvements: Including an AC adapter in the package would enhance the overall value and convenience.

A novel use for this charger stand, which I purchased about a year ago: I like to read Kindle books on my travel monitor rather than on my phone. My Samsung Galaxy's USB-C port connects directly to USB-C on my travel monitor with no other power source required. However, the travel monitor can drain the phone's battery. Also, the phone has only a single port. The charger stand provides a solution to this problem since it wirelessly charges my phone while it is connected to the monitor. The phone charges regardless of whether I place it on the charger vertically or horizontally. For my application, this solution is better than using Dex, which is Samsung's app for using cell phone as a computer. For Dex, I would require a USB hub and would have to deal with a tangle of cables as opposed to the single cable required with this approach. With this phone-to-monitor set up using the wireless charger, there is no need for me to buy a tablet, which is just a big phone without a cellular connection.

This charger works, but it’s definitely not my favorite. The biggest issue is that the phone has to sit just right on the stand or it won’t consistently charge, which became frustrating over time. I found myself double-checking it often to make sure it was actually charging instead of just sitting there looking like it was. It also charges noticeably slower than I expected, especially compared to regular wired charging. The stand itself is lightweight and simple, and I do like the convenience of setting the phone down vertically, but overall the performance was just kind of “okay” for me.

Compatible with my I 12 Installation: So easy plug in and done. Cord length: Very limited Accessories: just the charging cord.

Uso questa base di ricarica wireless Samsung da qualche settimana e devo dire che sono molto soddisfatto! È un accessorio pratico e ben progettato, perfetto per chi vuole eliminare i cavi e ricaricare in modo più ordinato e veloce. ⚡ Ricarica rapida e affidabile Il telefono si allinea facilmente e la ricarica veloce funziona molto bene, soprattutto con i modelli Samsung compatibili. Nessun surriscaldamento e tempi di ricarica buoni per essere una base wireless. 🎨 Design elegante e compatto Il design è minimal e moderno, si integra benissimo sulla scrivania o sul comodino. Occupa poco spazio ed è anche abbastanza stabile, quindi il telefono non scivola via. 🔌 Pratica, ma serve un buon alimentatore Per ottenere la massima potenza di ricarica serve un adattatore compatibile (spesso non incluso), quindi è un dettaglio da considerare. Inoltre, se usi una cover molto spessa, la ricarica può essere meno efficace. ✅ Pro • Ricarica veloce e stabile • Design elegante e poco ingombrante • Compatibile con vari modelli Samsung e altri dispositivi Qi • Silenziosa e affidabile ❌ Contro • Alimentatore veloce spesso non incluso • Meno efficace con cover spesse • Prezzo leggermente alto rispetto ad altri modelli simili 📌 Conclusione Un’ottima base di ricarica wireless, ideale per chi cerca praticità e stile. Fa quello che promette, e lo fa bene. Una stella in meno solo per l’accessorio mancante e la sensibilità alle cover, ma nel complesso un prodotto consigliato, soprattutto per utenti Samsung.

This Amazon Basics phone charging stand works great, and is VERY reasonably priced. The light at its base slowly pulses blue while it's charging your phone, it flashes blue to tell you your phone hasn't been placed onto it correctly, and also flashes green when phone charging is complete. It does need to be connected to a fast charging USB wall plug by the way, (as the item description recommends), but it's a great buy, highly recommended 😉👍

Working great

el mejor cargador que puedes tener carga bien pixel 8 incluso con funda, probado tambien con iphone 14 es genial, mire, y mire y volvi a mirar y no encontre nada mejor, ojo porque nompor mas caro es mas bueno en este campo.

Funktioniert wie erwartet. Man sollte keine Wunder erwarten. Blitzschnelles Laden ist physikalisch nicht möglich. Das ewige Problem, kaputte usb-c Buchse am Handy gibt es nicht mehr, keine Steckvorgänge. Alleine deswegen ist es ein guter Kauf