GLOTRENDS M.2 SSD Heatsink for 2280 NVMe/SATA SSD

Product works as intended but do not purchase it for PS5 SSD, as the height exceed the enclosure. But other than that the packaging and content, ease of installation is great

The product is very simple yet very effective in reducing the heat on my nvme by almost 20 degrees celsius. Highly recommended.

It work but quality is not was I expected

perfect

Working good for desktop!

no screw included, not worth to buy i have to buy another adapter with screw.

قام بتنزيل الحرارة الى 20 درجة و عن تجربة

parfait

Qualidade excelente e de fácil instalação e o mais importante: muito eficiente. Atendeu perfeitamente minhas expectativas

Lo primero que comentaré, será que cumple su función sobradamente y a continuación detallo algo más el producto. En mi caso, no pretendía "enfriar", sino "disipar" el calor que se producía en el interior de un MiniPC chino. El tema es que el disco, un Samsung 970 EVO Plus 500GB, me queda demasiado cerca del procesador y el calor generado irradia hacia el disco. El paquete que envían contiene (admás del disipador): - Dos toallitas (una húmeda y otra seca). - Dos gomillas negras para fijar el disipador al disco. - Dos anclajes de metal para fijar el disipador al disco. - Cinta térmica para colocar entre el disco y el disipador. El montaje me llevó unos 5 minutos, contando que parte del tiempo lo empleé en quitar la pegatina de los chips superiores del disco y en limpiarlos con ambas toallitas. Para la sujeción empleé los anclajes de metal, teniendo cuidado de no dañar la placa inferior de cobre que viene con este modelo de disco. El resultado es un bloque compacto bastante firme que atornillé finalmente al zócalo M.2. Antes de montarlo, las temperaturas del disco oscilaban entre 60º (iddle) y +85º(stress). Ahora mismo en reposo anda sobre los 40/42º dependiendo de la temperatura ambiente y no consigo que supere los 60º tras someterlo a múltiples pruebas de rendimiento. Adjunto 2 capturas durante una prueba de rendimiento realizada con CrystalDiskMark 7 (9 pasadas de 1 GiB) y otra tras 5 minutos de reposo. Comentar también que, ya que disponía de espacio, preferí comprar el disipador de 10mm de alto (22x70x10mm) para asegurar bien la disipación.

soğutma konusunda iyi beklentiniz fazla olmasın 10derece aşağısı olması yeter zaten

I've an ancient Toshiba THNSNJ25 that fits the NVMe sockets (its a B-key drive). It is not fancy, but its been with me a long time. SMART claims it is still good.... but for big writes it was throwing errors. LOTS of errors. I was going to chuck it, which made me sad, so thought to buy and test a cooler on it first. Glad I did! Using Linux (Mint 21.2) and f3write to fill the drive with 1GB files, it hit a max of 43 degrees, which was a drop from ~60 to ~65. The speed to write was constant at ~100MB/sec. But READ speeds, tested with f3read, shot up to 400 MB/sec... which was rather astounding! Previously there were corruptions everywhere. It was a mess. Now, with the cooler, zero corruptions. To say I'm chuffed would be a vast understatement. FIVE THUMBS UP - HIGHLY RECOMMENDED As an added thing - I agree with others on the metal bands. These seem to be a bad idea. My kit came with 3 neoprene-like bands - which hold the radiator very firmly to the drive. I would not use the metal bands, for the underside of these drives are encrusted with contact points...... bad!