Nilight 2 Pcs 4 Inch 60W Led Pods with 2 Inch Tow Hitch Mounting Brackets Backup Reverse Lights Rear Light Bar for Pickup ATV SUV Truck Trailer Boat

Did not fit H2 hummer. Sold to a friend. They seamed bright and of quality

I purchased this for my son's 2004 Chevy Silverado. He recently put window tint on his windows and made it difficult to see at night with his reverse lights on the tail lights. These lights are very bright and adjustable so you can point more towards the ground or straight out for distance with the adjustment on the bracket. You can also turn the lights to the right or left as you prefer.Installation - as others have mentioned, the bracket didn't fit around the hitch...on the outside. That is due to the chain loops. Our truck has a factory hitch and and the end of that is under the truck had just enough room to install these lights. I actually like how the lights now sit under the bumper. The chain loops very slightly block the lights, but they are so bright it is plenty of visibility.Also, as others have mentioned, the wires to the lights are short, but I used some short scrap pieces of wire to have enough to get to the trailer plug to tap into the reverse light wire. I just grounded the black wire to a piece of metal and it all worked perfectly. I would also note that there was no installation instructions included with this light, but there are some YouTube videos that help.I have purchased other Nilight products and they have all been good quality. I would recommend, but know that if the bracket doesn't fit around your hitch, you may have to get creative.

The hitch on my '01 RAM is 2.5", and the bracket is supposed to fit, but it doesn't. My hitch does have a flange on it, and I also have a brake light housed in it. This is how I keep this unit in place, using the brake light to hold it in. The lights could be better. The wires are cheap, and too short. Adding more wire to these was just like mush. In addition, I didn't want to cut into my backup light wires, so I found another way.I connected the black wire to a good ground on the truck, and ran the red wire to my 7-pin trailer connector - the one in the center (most ports will label each pin on the outside cover - and the center pin is generally for reverse lights).A word of caution, make sure the battery is disconnected when you make the pin connection, and use a good female connector (you will likely have to bend the connector open a bit to make it fit over the pin). Also, wrap the connecter well with electrical tape to make sure there is no contact with any other pins, and fits tightly on the reverse light pin.Some other reviewers have mentioned that these light pods retain water, which is unfortunate, and I suppose I'll see if it happens when it rains. One option is to coat the edges with silicone. I just didn't see anywhere other than the front lens cover to seal. I still like these lights, and the bracket, but wish it was a better fit.

I painted my high light bracket blue the match the blue on my truck and I’m very happy with the quality on it.

Doesn’t fit 2020Tacoma hitch

Great little lights, use them for extra backup lights so I can see at the campsites. Easy installation, can’t beat the price. Let’s anyone behind you know that they had better move!

Very disappointed with Nilight products. Every light I’ve purchased has had poor sealing, allowing moisture inside. This has been a consistent issue across multiple units, not just a one-off defect.I would not recommend this brand—look elsewhere for better quality and reliability.

Had these delivered today and after a few hours, I got them installed.They didn't come with instructions, but they are fairly simple to figure out. Most of my install time was due to figuring out the wiring, as this set doesn't come with with ANY. Luckily, I had some handy.They do exactly what they claim and they help me see better at night for sure.I recommend them. Just be aware that you will need extra wire and some splicing equipment.

The product arrived in time and it looks very good. Unfortunately, it won't fit between bumper and receiver. Everything else seems to be okay but there is no way to get it in there. So it's not only the space between receiver opening and hooks, it also needs at least an inch or 1.5 inches between bumper and receiver. Great idea but I'll have to return it 😭

You have to be careful how it fits onto your tow point in relation to wire connections to trailer Would for fit on mine so it is now no use to me and have installed them on a totally different brackets Lights are great

very good price

Nicht zu Empfehlen.

Al colocar lo se adapto bien y lo pude asegurar, en general me parece muy buen producto