Authentic Genuine Nagoya UT-72 Super Loading Coil 20-Inch Magnetic Mount (Heavy Duty) VHF/UHF (144/430Mhz) Antenna PL-259, includes additional SMA Adaptor for BTECH and BaoFeng Handheld Radios

It is designed for both amateur radio and general communications use, featuring a strong build that can withstand outdoor conditions. With a 2m/70cm dual-band frequency range, it delivers good signal reception and transmission quality, making it a popular choice for mobile operations. The antenna is easy to install and offers a decent balance between performance and convenience, although it may not offer the same high-end performance as larger antennas. Overall, the Nagoya UT-72 is a reliable and affordable option for radio enthusiasts who need a portable antenna solution.

Better performance and SWR on 2m than 70cm in my case. I have it mounted off-center on an SUV roof. Good antenna overall though. Looks like a basic 1/4-wave VHF.2m: SWR perfect 1.01, goes up slightly at high power, Tx very good, Rx very good70cm: SWR 1.34, goes up slightly at high power, Tx good, Rx fair/noisy.

This is a key component of my poor man's mobile. I'm posting this same review for all the other accessories of the build, but not for the radio which I love and reviewed separately. Here's the build:BaoFeng BF-F8HP Nagoya UT-308UV 22-Inch Magnetic Mount VHF/UHF Antenna SMA-Female for AnyTone, BaoFeng, and YaesuBaoFeng BL-5 12V Battery Eliminator for BF-F8HP and UV-5R RadiosBaofeng BF-S112 Two Way Radio SpeakerRegarding each part. Love the radio.The antenna is good and comes nicely packaged with all the needed parts. What is really nice is that the antenna, base, and feed lines are all separate pieces. Mix and match however you want. The base magnet is strong. The antenna and feed lines work well. The long feed line is about 10' which is plenty for me.The 12V adapter is also OK. It's a tight fit, but does fit. It's also pretty cheap - so modify it as you will to change connectors, move the input line, etc. Personally, I think feeding the wire gets in the way because it enters at the bottom of the radio. Such is life. Maybe I'll modify this thing to use a dedicated circuit instead of a cigarette lighter socket - and put on a longer power cord while I'm at it.The speaker thing. -hate- This thing almost kills the build. The first time I contacted someone they reported weak audio. I pulled the hand set and spoke directly into the radio and my audio improved. Also, the wire coil is too short and stiff. Wayyyy to short and stiff. You end up pulling the radio around by the wire. You might as well just hold the radio.But.... It turns out that wrapping the power cord of the 12V adapter and the antenna feed line is an OK solution.Anyways, this was a fun experiment but in the end it seems better to just use a handheld as a handheld and to get a real mobile for the car.Regardless, five stars for being a nice antenna kit

Worked well for me. Magnet is strong and I’m able to pick up all my local repeaters. For the price, can’t complain. Haven’t got around to checking SWR.

this antenna is awesome and is triband to boot. I got it tuned to 1.0 swr on 2M and 1.47 swr on 70 Cm. 1.25M was 1.85 swr, but it still got out good enough to make repeater contact with the net. Built very well.

This review is for the the Magnet Mount dual band version. Great little antennas. I specifically like them because of the wider base over say a Diamond. It's not going anywhere. I like the adapter for your HT as well though I am not too confident on them lasting. I have one on the car and one on top of a metal safe in my house. Both work great for local nets and simplex. Works good enough on GMRS too with a bit higher SWR but still in working range. If I was mainly using it for GMRS I would get the GMRS specific one they make though.

I've used many different magnetic Mount antennas over the years for many different services, and this antenna has been the most impressive of all in terms of tunability and stability. For the 2 m and 70 cm ham bands, even at high power, the SWR is virtually flat. For UHF GMRS my SWR is around 1.3-1.5:1. Impressive!Good quality RG-58U coax, far better quality than the type of coax supplied by other manufacturers, keep signal loss to a minimum. The magnetic base is coated with a rubberized material and is extraordinarily strong, make certain that the surface you intend on placing it on is not made from aluminum. I've also used this antenna place on a large sheet pan for fixed base use, and the SWR is also very usable like that.Because I am extremely fussy about putting things on the surface of my paint, I would recommend that prior to placing the antenna, wipe off the surface of the paint with a wet clean cloth several times and then dry, and similarly do the same to the bottom of the antenna before placing it. If you remove the antenna, I place it in a clean plastic bag so there's no chance that the bottom of the antenna will pick up on magnetic particulate which could be transferred to the pain finish. This is a quality product that will deliver to the discriminating radio operator, I recommend it with confidence.