ERYONE Mixed Material PLA Filament 1.75mm +/- 0.03mm, 1kg Spool (2.2LBS) 3D Printer Filament, Wood PLA, Light Wood

I have always been dubious about marble filiments, wondering if they really resemble marble and I am so glad I gave it a go! This filiment was so easy to print with. No need for a temp tower, printed at 210c and came out flawless. Such a bright, smooth, easy filiment. Strong and a clean look. I would recommend 100%Update to add I've tried the green titanium glitter and it is just as stunning, used it for a lenovo legion go grips and my partner is in love with the outcome! You'll need to do temp tower, flow rate and retraction test to get this one right but it's well worth it with the outcome! When the light catches this filiment it glistens and the colour change is stunning

Great appearance, very smooth and pretty authentic marble appearanceClever filamentHad to be printed slower

Been 3d printing for a number of years now, recently lucky enough to buy a bambu lab printer, as good as it is, it still has issues with the usual stuff. This pla, I just put in the machine on the stock profile, and it printed perfectly first time and looks amazing. I brought it specifically for this project and it's exceeded my expectations. 5 bottom layers and 3 walls, filled with water 8 hours ago and hasn't lost a drop

The media could not be loaded. Printed fine without changing any settings on my FFCP (210c nozzle, 65c bed), tiny bit of stringing but that was probably as I had a few things on the build plate at once. Feels brittle but could be as the prints are almost hollow.Spool is a normal size, so fits your average spool holder, also has the cut-outs on the side so you can see how much you have left. The plastic bag it comes in is not reusable - no zip or anything, you have to cut it open.The prints look quite stone-ish, somewhat shiny so nearer marble than concrete, colour is a bit like pumice - light grey with darker spots.Not well wound though - see the video, you may have to watch for tangles or mid-print snaps unfortunately, otherwise would have given 5 stars.

I really wanted to like this filament. I got a grand total of a single successful print out of around 12 attempts. 2 overnight prints failed when the filament got jammed and no longer extruded. One fail during the day when the print was almost done. Jammed again. All other fails were to do with terrible adhesion. Went through the normal printer troubleshooting steps, relevled, washed the build plate off, auto levelled, reset the Z offset.The moment I switched back to any other filament adhesion was back to what I expect.I just can't recommend this specific filament which is a shame as I have had great success with this companies other offerings.Avoid this marble PLA at all costs though until they can get some actual QA.

The ERYONE Filament PLA Marble 1.75 mm, is a great print.

This is good looking PLA for a stone finish model, or just to make a model that doesn't look plastic. It's very decent PLA firstly, with good bed & level adhesion, but it's the flecked pale grey matt finish that makes it stand out. It is a bit brittle, so don't try to print thin parts or walls, but it's no worse than other PLA in that regard. I don't think I've seen it string at all barring thin threads, but I think the best nozzle temperature for layer adhesion is around 200-210 degrees.

I've printed so many things with this stuff. My favourite is a set of Oof stone heads that sit on my desk at work. The effect of quite subtle but you can mistake it a stone material. People are confused whenever they've picked on of the heads up and find it's hollow and hardly weighs anything. Prints really well too.

I have never used Marble filament before and I always wanted to give it a shot. This Eryone PLA was very easy to calibrate and get great quality out of with basic settings. I had no issues with clogging, adhesion, or bad smells. This material does a very good job at hiding layer lines and works similarly to Carbon Fiber with the outside finish. I have yet to test durability, but it appears to compete with other PLAs.

منتج رائعاستفد منه كثيرا

Je suis vraiment très satisfait de ce filament PLA. Je suis plutôt débutant dans le monde de l'imprimante 3D et je dois dire que ce filament est vraiment facile à utiliser pur qui que ce soit. En plus de cela, la marque préconise une température de buse entre 200 et 220 degré, personnellement, je l'utilise à 205 degré et le compromis me semble bon. A noter que le poid total est d'un kilogramme et que le diamètre est de 1,75 millimètre. J'ai choisit ce produit parce que la couleur m'intéressais vraiment et j'en suis fortement satisfait. Le contraste est beau entre le blanc et le gris. La couleur est agréable d'un aspect général et aussi plus précisément. La marque, "Eryone", cela moi le lideur des filaments spéciaux, soigne fortement l'emballage de la bobine. En effet, la bobine est emballée dans un amballage totalement hermétique, protégeant donc de l'humidité pendant le transport. Pour ce qui est de la vitesse d'impression, j'imprime à 50 millimètre par seconde, et avec ce produit là, je pense qu'il faut impérativement faire attention à pas imprimer trop rapidement, même si d'une façon général, ce PLA s'imprime de la même façon qu'un filament basique. De plus, aucun problème d'accroche au plateau d'origine est à noter, même si mon imprimante possède un plateau chauffant. Le rapport qualité prix est presque optimal, le prix est raisonnable par rapport au concurrent, la couleur est belle, le produit est robuste... Enfin, l'odeur reste cependant plus importante qu'avec du filament classique mais elle reste respectable.Je recommande fortement !

Quería probar este filamento para comprobar el acabado y si éste consigue la imitación a mármol que promete. Es un buen filamento y ciertamente el acabado es parecido a la piedra debido al gris del filamento y a las motas grises más oscuras que tiene fundidas. Consigue un brillo no muy exagerado lo que hace mejorar el resultado final y darle un toque único a las piezas impresas.En cuanto al propio filamento se refiere destacar que viene perfectamente embalado al vacío con su bolsita anti humedad dentro. Tiene la precisión dimensional que promete y carece de burbujas y suciedad por lo que su impresión es muy fácil a 200 grados (temperatura que a mi particularmente me ha ido bien) aunque he probado temperaturas de 205 y 210 grados con idéntico resultado. Lo he probado en dos de mis impresoras y después de ver el resultado puedo recomendarlo para imprimir figuras escultóricas por su logrado acabado y su facilidad de uso. Una excelente compra.

Obwohl das Filament etwas teurer ist habe ich mich dazu entschlossen für meine Buddha Figuren ein Marmor-Filament der Firma Eryone herzunehmen. Wie immer wenn ich ein neues Filament benutze habe ich erst einmal einen Temptower gedruckt.Temperaturbereich 190-230°CDruckbett 65°CDas Beste Ergebnis stellte sich ab 200°C bis 220°C ein. Verwundert war ich allerdings darüber das es annähernd keinen Unterschied zwischen 200 und 220°C gab.Also gleich mal mit den Buddhas gestartet. Ich muss ehrlicher Weise jedoch zugeben ich hatte anfangs etwas Probleme und wollte schon aufgeben da ich keine Haftung auf dem Druckbett her bekommen habe. Letztendlich stellte sich jedoch heraus das die Probleme vom Leveln und im Zusammenhang mit dem Filament entstanden. Das Filament verzeiht nichts und das Druckbett muss genaustens passen was aber in der Regel ja eine Selbstverständlichkeit ist und nicht zum Sterneabzug führen kann.Nach den eben benannten Fehlversuchen und der anschließenden Justage habe ich also den Druck der Figuren gestartet. Dieser wurde berechnet mit 27 Stunden was auch ziemlich genau gestimmt hat. Während des Drucks somit weder Stopfer noch Fehlwindungen und so ohne Weiteres weiter zu empfehlen.Ich werde mir dieses Filament auf alle Fälle wieder bestellen!