Soap Dispenser for Kitchen Sink, Built in Sink Soap Dispenser (Brushed Nickel), Countertop Soap Dispenser Pump with 47" Extension Tube kit, No Need to Fill Little Bottle Again (Longer Thread Shaft)

Our old name-brand soap pump died. I was hoping to simply replace the pump itself, but that wasn’t possible. So instead, we bought this system.It was easy for two of us to swap out the old pump and bottle for this system. I LOVE that it connects to the big soap bottle, rather than us having to fill something from above (always an adventure, trying not to overfill it). We followed the priming instructions and had it working quite quickly (in part because the soap bottle sits directly underneath the pump).We’ve had it for three weeks and are very happy so far.I will say that it is not as solid as our old system; it is stainless steel in color but I’m pretty sure most of the parts are plastic. Still, if it lasts more than a couple of years, it’s a bargain compared to the expensive name brands.And again, I LOVE that it connects to the full soap bottle, rather than us having to fill something every month or two. That alone makes it worthwhile.

This was very easy to install and looks good. While the included instructions do not detail installing each piece, it is very easy to figure out on your own. The pump functions well and dispenses soap readiliy.

The base of the pump head is a bit small so you need to be extra careful centering the pump otherwise a gap will show. A better designed pump would flare out wider. Also, the metal feels thin and cheap. We'll see how long it lasts.When priming the pump, I did what someone suggested and used a big syringe to apply suction to the tube. It was much easier than pumping 50+ times.

We bought our house and have so many projects to do that I wanted to do just a couple easy budget friendly things to make the kitchen sink nicer for now in case we want to Spruce it up and splurge later. We got a new faucet on it and decided we didn't need the water wand, so I started to look at options for the hole that was there from it. That's what led me to this.It fit the space perfectly, and now I don't have to have a soap dispenser on the counter for the dawn! It looks good, cleans off easy with the rest of the sink and was easy to install. It took my husband maybe 10 minutes. I like that it came with multiple bottle top options so if we want to change up the container size or something, we're covered. I think it's a pretty good quality item for 20 bucks, and it works just as intended! Happy with it.

We just upgraded to a large workstation sink and I decided to try one of these soap dispensers you attach to it. I love it! The base fits well and snuggly to the top of the sink and the smaller pump has a beautiful sleek look. The hose attached very easily to the large Costco Dawn soap bottle and now we don’t have to keep refilling the smaller bottle we kept on the counter! My husband just trimmed a few inches off the longer hose. The amount of soap that comes out with one pump is a perfect amount!

I ordered this countertop soap dispenser to replace an old one. It is well made and came with plenty of extra parts, enough to fit or work in a number of scenarios, a generous length of tubing and a CHECK valve. This is critical to keep the tubing primed to prevent the soap from sliding back down into the tubing requiring multiple pumps to pull up the soap with each use.I did need to cut the tubing and reposition the check valve higher on the tubing making it closer to the pump and not end up in the half gallon jug of soap underneath the sink. Works great and I am very pleased.

This device really sounded good, but operationally, it is greatly lacking and difficult to use.The problem is that the tapered cork that has to fit into the many different sizes of soap bottles, so they give you several to choose from, but at best, it is still problematic. When you are setting it up for the first time and each time you need to replace the bottle of soap, the bottle itself must be cleaned to insure that there is no soap on the inside neck of the bottle or the tapered cork will pop right back out. When you insert the tube into the bottle, if the tube from your prior soap bottle touches the inside neck of the bottle and gets any liquid soap on the bottle, you will have trouble keeping the cork in. Most likely the bottle has a residue of soap on the neck of the bottle from the bottle being tipped over in your shopping cart or grocery bag on the way home, and unless you clean it off so that it is not slippery with soap, the cork will not stay in, it will pop right back out.Save yourself frustrations and don't buy this lousy device as the concept sounds good but you will regret the effort that you will have to expend every time the bottle has to be changed.If you get the cork to stay inserted in the bottle of soap, you will then have to pump the dispenser some 60+ times to get the soap to refill the tubing, and you will wonder if it is even working because it take so many pumps with seemingly nothing happening. If you finally reach this stage, it will work well until the bottle is empty and you have to start the whole process all over again.What I finally dis was to take a long twisty tie wire (very long, or perhaps two or three tied together to make it long enough) like at times come on a bread bag and tightly secure it around the neck of the bottle in the threaded area so that it can't gravitate upward and take the remaining length and angle it up to the top of the cork and tightly wrap it around the cork and twist the ends together to secure it. This should hold the cork in place. After replacing the soap bottle many times I finally tried this method of holding the cork in the bottle. It probably would work to keep the cork in place even without cleaning the inside of the bottle neck from the soap that lubricates the internal edge of the bottle neck. I should have tried this the second time I switched soap bottles!

Very easy to install. The stopper for very well into the soap bottle. I’ve been using it for a couple weeks now and I love it.It didn’t take me 50 presses to draw up the soap and I left it with all the tubing. Directions state to press and hold for a second or 2 and release for a second or two. I probably pressed about 30 times. I was expecting much longer because of the reviews. Maybe they didn’t follow directions, or I got lucky?