ABKONCORE C610S ATX Mid-Tower PC Gaming Case, Magnetic Dust Filter, Full Transparent Acrylic Side Panel, 7 LED Changing Modes, Water Cooling Ready, and One Pre-Installed 140mm Fan

this is a computer case. it is big. it is extremely well built. it was packaged very nice. it came with 5 or 6 cable ties. it gave me every feature i needed, and another i didnt even know i wanted (hdd sleds). the leds in the front work. the exhaust fan it came with works perfectly, and quietly. installing all components was very easy because of the amount of room inside. the psu cove and cutouts for power cable/sata routing was well thought out. the mobo standoffs screwed into the case with no problems. the cables for the front panel were long enough to suit any mobo layout. the dust filters look very adequate. this case was for the kids' build. when its time to refresh my rig i will look for this same brand of case.

I will keep this short and sweet.PROS:- Large, spacious case with a fan built in.- Easy to cable manage- Glass Panel is easy to take off and clean- Comes will all equipment needed to install MotherboardCONS:- The harddrive bay had to be removed to install all of the cables from the power supply. Now, I won't actually need the harddrive bay because I am using an M.2 SSD, but if you want to use a hardrive it could be a challenge.- Lightweight. Normally, that would be a pro, but I think the light weight feeling leads credence to it being fairly cheap. HOWEVER, as of now, it still has held up nicely.- Had to remove the extra fan installed to install the motherboard. That is not going to be an issue for everyone, but it was for me because I used a very large Noctua fan and heatsink that blocked the final screw.OVERALL: A very good case for 80 dollars US. Good for first time PC builders, since it is large and lots of room on the inside. Leaves plenty of room for cable management, but would highly recommend just removing the hardrive bay to take advantage of the extra room.

Great and stylish!!! Would buy again!

The instructions could have been a little better but all in all a great purchase!

Product was sent to me by an Abkoncore rep for review. While the C610S is not perfect, it does have many features that I like.First of all, I love seeing the ability to mount a 140mm fan in the rear. It does come with 1 140mm fan mounted in the rear, but it is a standard 3 pin, not 4 pin PWM. You can also mount 2 fans on the bottom of the case. Power supply can be mounted either fan side up or down. There are 9 tie down points in the rear and the HDD rack on the bottom is moveable and removable. Plenty of room on top and on the left rear of the case to hide wires. I measured 27mm of clearance between the wall where the MB mounts and the back panel of the case at the deep points..not bad, though only 9mm of space otherwise so adding cable extensions might be a bit tricky. PCI brackets in the rear are the break away type but they do provide 4 additional covers. Case isn't too flimsy at all, except in the front where the fans mount. This is by design as the front grill is also break away and can be removed for extra air flow. Front RGB strips appear to be addressable, possibly hack-able, though by default it is controlled by a button on top of the bezel, plugs in via molex. I will update this review after I have done a build in the case, and will add some images of the build. For a video overview look at this case done by me, just search for "ABKONCORE C610S OVERVIEW" on YouTube by Phreakwar PC Custom Builds. I give a more detailed look inside the case and a better run down description of what you get.

As titled, this case is easy to understand, and is generally okay if you’re not looking for a too fancy build that requires lots of wiring at the back of the case.Cons:1. This case has sharp edges, be careful not to scratch your hands on it.2. You would think for a $80 case this would have a power supply shroud that is detachable, it doesn’t.3. There is such tight space behind the case for wiring, a 24-pin PCIE wire could barely fit without pushing the back of the case outwards.4. The LED button on the front panel was not working despite me connecting it to the correct pin. I don’t care much about LED so it doesn’t bother me, but to those that do, you might wanna check that first.5. The cases legs bring the bottom close to the floor, concerning me about the temperature of the PSU, so I had to stick hard objects under the legs to make the case taller for more breathing room for my PSU, longer legs would be better.Pros:1. Easy to use, the pre-installed screws and bolts are a big help.2. It’s spacious inside, and a noctua D15 fits with extra space as well. Well done.3. There is a USB3.0 port on the front panal, and two USB2.0 ports by it.4. The clear side panel is really pretty to look into once you finish your build.Pretty good in general, would recommend if you’re not so worried about the budget, and want to find a big and airy case that’ll fit giant fans or whatnot inside.

This case is well worth the money I paid. It's not nearly as nice as the beQuiet Base 700 I also have, but it also costs less than half that case. The lights on the front manage to be both noticeable and subtle. The single 140mm fan set to vent the case in the rear is surprisingly quiet.Pros: - Great price - Quiet venting fan - Fine (small holes) dust screens on PSU intake and top of case - Very lightCons: - There is a bit more flex in the case than I would like - The holes for the PSU did not line up well with my Corsair RM850x (this was an easy fix)I do with the case was about inch taller with that space coming in-between the "top edge" of the motherboard and the top of case. I choose to use the Corsair H115i AIO liquid cooler, and due to the size of the exhaust fan, and placement of the RAM on the motherboard, I was not able top mount the liquid cooler. The H115i did fit on the front of the case. However the front bezel of case really diminishes the amount of available air flow coming through the radiator.All in all, a good case. So much so that my son also purchased one as well.

It is plastic trash.

Buen gabinete para su precio, algunas piezas si se nota que son de mala calidad, el espacio para colocar la motherboard llega a ser pequeño y cuesta un poco meterla, el ventilador que viene es de 3 pines, pero es completamente funcional

el material es de buena cálida solo que no se transparenta el panel tanto como esperaba , para mi gusto

Muy buen gabinete, un excelente precio por la calidad. Vale la pena y tiene muy buen espacio para ventiladores

Firstly this arrived a day early which was great so well done to Amazon for getting it to me quicker than was expected.This case looks great. Keep your distance and you will be fine. It is really light, and I mean really light. Compared to other cases I have used this is really nice and easy to move around. Even with all the components in.It came with a 140mm fan on the back and that had to be removed to get the motherboard in. The screws supplied are plentiful and of the standard build quality, but I found them hard to screw into the case the ones along the back were made harder by the frame of the case so needed a thinner screwdriver to get in to them.I mounted 2x 120mm fans on the front there is enough space for 3 if you really need a lower one. But when I turned it on there was a clipping from the top fan. This was caused by the mesh like metal in front of the fan, all I can think is when screwing in I applied too much pressure and caused it to miss shape. I couldn’t get it to work after 30 mins of adjustment so the came off easily with a twisting movement. This in turn started to show the flaws in this case. The entire case is made from the same thickness of alloy all around no wonder it is so light. Now don’t get me wrong it’s not flimsy it’s pretty strong but I don’t feel I could sit on it like more well know case manufacturers, not that you would want to sit on it, but, you see what I mean.The full acrylic side is a nice touch but it has a slight opening in the middle of the top and bottom sides and this makes it feel cheap. Other reviewers have made comments around this and they are right it’s not paid off. Maybe it needs a solid surround rather than 4 holes to screw to the case.The reason I’m on the fence is the cheap feel to the case. I just think it won’t stand up to much abuse like more expensive cases. And this is why I am on the fence, it is a good case airflow and size in side it looks good but the cable management is a bit odd. It’s lightweight but feels cheap.The buttons on the top, On/off and reset and you get one for the RGB, feel ok I’ve felt better but I’m not sure how they will stand up to years of use.I would recommend if you are putting in a cupboard type desk but not for on show. Which is a shame as the RGB on the front is quite nice.

👌