M67 Marine/RV One-Step Compound, 32oz

This is not a coarse grit rubbing compound but it is very effective at removing heavy oxidation from gel coats with minimal effort. I have an older Seaswirl Striper boat that’s been exposed to the elements for years. The gray gel coat on the boat was almost white from oxidation. I used my buffer machine with an orange foam pad and a little bit of this compound to see how well it would work. I was amazed at the results from just 2 minutes of buffing. The milky gray gel coat returned to its original medium gray color with a smooth shine. You can see the difference in the picture. This compound does remove superficial surface scratches but not the deep scratches. This M67 compound truly is a one-step solution for heavy oxidation. It exceeds my expectations. If I use it wisely, this bottle will be enough for the hull. I’ll need another bottle for the deck and top. I consider it a good value for the money.

I have a 20 yr old boat, and although it’s been waxed over the years, this really brightened the color and removed the oxidation. See attached picture. I did use a wool polishing pad on a low speed grinder, but this was not required, and only helped a bit as I saw from some testing just hand-rubbing the compound on the paint. After this treatment, I waxed the boat completely to protect the finish. I’m very happy with the results. She looks new again!

This stuff works amazing! My father’s boat had been sitting for years and needed a good makeover. I grabbed this up and gave it a try. Was skeptical at first but the results were all that I needed to see to be a believer. The application was easy the finish was great as well!! You couldn’t run a towel over it but after it was smooth as could be!

Works decent. Hides small scratches adds a mirror like shine to boat. It didn't work well with a buffer wheel, that could have been because it was a 45 degree day in april. When I tried again by hand on a warm day it worked really well. However in order for it to not "leave a haze" I had to put extreme pressure on the boat hull with a microfiber cloth, probably close to 50lbs off pressure. It did work well it just took a lot of elbow grease.

I did not believe what kind of scuff marks etc this product removed. Used a polisher machine and some areas by hand. Awesome stuff

WOW Made my camper look new again it removed the oxidation with little effort.

Works great

It works, but it's not a miracle like a lot of videos/photos might show. I had been using a different compound and while the results were decent, it was hard not to notice the reviews and videos of M67 showing spectacular results, so I ordered it with high hopes. But, while M67 does work just fine, it doesn't seem to give much better results than other products. It's hard to capture, but the result is quite similar to what I was using before. It does restore some of the original shine and smoothness, but not any better or worse than competitors. Now, you do get a lot of product, 32oz, vs other brands, so there it that. But, I'm giving it an average score since it does what it's supposed to do, but it doesn't clearly stand above the rest, at least in my experience. Just for reference, I used a 6" orbital polisher and synthetic wool bonnets to apply both products. Polishing also took place in similar conditions, early morning with no direct sun.

I recently used the Meguiar's M6732 Marine/RV One Step Compound on my boat, and the results were outstanding. This product is a true game-changer for anyone looking to restore and maintain their marine or RV surfaces. Design: The 32 oz. bottle is easy to handle and apply. The formula is specifically designed to clean fiberglass and gel coat surfaces while leaving behind a high-gloss finish in one step. Functionality: This compound effectively removes heavy oxidation, scratches, stains, and tough water spots. It restores the color and shine of neglected surfaces, making them look almost new again. It works well whether you apply it by hand or by machine. Durability: The results are long-lasting, and the surfaces remain glossy and protected for an extended period. Regular use of this compound will keep your boat or RV looking pristine. Ease of Use: The application process is straightforward. Simply apply the compound to the surface, work it in with a soft cloth or buffer, and then wipe off the excess. The instructions are clear, and the product performs as advertised.

tolle Reinigung, gute Qualität, schnelle Lieferung, alles Bestens.

Este es el mejor pulimento para barcos, por excelencia

I have a 2015 travel trailer with the flat bonded fibreglass walls. Over time, the surface had become dull through oxidation and after much research, I was still undecided whether I needed the separate cutting compound, polish and wax or whether this would do the trick. I went with this because it was cheaper by half and would take less work but I'll admit that I was prepared to regret the decision. I ran this on a couple of different power-polishers and it was equally good on both and did a fantastic job. I really cannot see how, in my case, the separate products would have resulted in a better finish but just for my own education I may grab some polish and wax to see if it does improve the shine. Certainly all the oxidation has gone already and that was what I really wanted. I would highly recommend a power-polisher for the task rather than doing it by hand. I should also add that I used quality pads on the polishers which I am sure helped a little. In summary, unless you are trying to remove very heavy oxidation, this is the product you need.

Great stuff brought my jet ski up lovely and shiny again!