GoYonder Tile Blade 7 Inch, Super Thin Diamond Saw Blade for Cutting Porcelain Tiles, Granite Marble Ceramics (7"-Blue)

Very nice blades, nice and thin and hardly any chipping will definitely buy again

I used the blade to cut ruby. It is a bit wide and wastes material but cuts easily, stays sharp. The center hole is a one inch diameter, not the smaller size quoted! Over all, the blade is well made with diamonds well mounted and showed no wear after 10 cuts and inch deep. After mounting in the saw, the blade ran true. I use water as a cutting coolant. It works better if you can feed really hard material slowly and evenly, with the material ether clamped or glued down to avoid breaking the last little bit, sort of a sled with a screw feed.

We bought this to make a small 1/4" cut along a granite countertop to put in a stove. It worked perfectly and cut the granite nicely and quickly.

Están súper bien siempre usa de estos hojas para el trabajo y me tardan para lo que uso 10 de 10 recomendable

I didn't know what to expect but was very pleasantly surprised. I used a 4.5" angle grinder to cut 2" deep grove into concrete that had embedded pea gravel throughout. It went very well; took 45 min and the blade is worn, 30%+ left (80+ of diameter left) but I literally cut 20+ linear feet through concrete with stone in it and no water cooling. yes I tool very short 10-30 second brakes to cool blade but it went very well. I am using a cheap harbor freight saw/grinder.

.

Straight off the bat the photo represents this blade vs others. This blade gives clean cut with little to no clearly visible chips. Strong blade was used with and without water and has lasted a whole bathroom so far. Definitely a must buy if you are a tile installer. I bought them so my installer would use his crappy blades leaving me with chipped installs. I would recommend.

I bought this blade to cut rocks on a wet tile saw and of all my previous blades, this one is quick! It's also pretty aggressive while cutting, leaving no room for error if you have to turn the rock. When installing, I realized the radial center of the blade was thicker than other blades, and made it nearly incompatible with my saw. It's blue paint wore away quickly on the rock as I was cutting, but otherwise the blade is fine. It does as described but doesn't leave the cleanest surface. Overall, if you are trying to get through a rock with little regard for a clean cut, this one's for you!

Super produit je recommande fortement découpe Propre

I only had to make a few cuts in porcelain, but the cuts were perfect!

全然切れん

Bonne coupe sans éclat énorme. Ligne droite bon boulot. Quelques petits éclaté mais sérieusement fait aussi bien qu'une marque bcp plus cher. A voir si tenu dans le temps.

Ware entspricht der Beschreibung, schnelle Lieferung!