EZDIY-FAB Moonlight 120mm RGB Case Fan, 6 Pack, ARGB, Aura SYNC, Speed Control, 26.16 CFM, Desktop Compatible

**I'll list pros and cons at the bottom if you don't want to read through** I really didn't expect a whole lot from a pack of 6 RGB fans for $50, but I have to say I love these things! After looking at a ton of different RGB fan sets, I decided on these for the cost, looks, AND they were the only ones with a fan controller that i haven't seen a single review about wires shorting or a fire starting. Unboxing them I could immediately tell they felt pretty beefy. Thick plastic, no flex or blade wobble. The fan controller feels paper light, which is usually a concern, but it's been working perfectly so far. It was easy to install everything, the included screws didn't feel difficult to screw into the fans, the double sided tape on the controller is strong, and there is plenty of wire length for even larger cases. Everything worked without a hitch. The colors and effects are absolutely beautiful, the transitions are super smooth and the colors are vivid, you can also adjust the effects speeds. The remote is very basic, and can take a bit to scroll through the effect options, but it's working perfect. Airflow is really good, and noise levels are surprisingly low. You can use the controller to set the speed to low, mid, and high, and all are pretty quiet. I haven't come across any bugs in the way everything works. And as a huge plus, these do keep your settings after powering off, or unplugging, some of the inexpensive sets don't. I don't really like the proprietary fan plugs, if the fan controller dies, you cant use the fans on anything else that i'm aware of, and I don't think any other fans would work with the controller either. There's also no PWM for controlling the fan speed, it all has to be done with the supplied remote. There's an ARGB header on the controller to sync with your motherboard, but I can't test due to lack of a header on my rig. The fan controller is SATA powered VS molex, which is nice and seems a bit safer thank the molex horror stories i've seen on other units. Even the stickers on the fan blades hubs are installed well, they don't have an annoying wobbly look that some fan decals have when they are applied wrong. In short, i'm pretty blown away with the value here, if I get even a year out of these I'll be really happy. PROS - Solid feeling build quality - Beautiful vivid RGB colors and cool effects - Tons of nice effects - Easy set up - Everything working and no bugs (so far) - 6 fans and a controller for $50! - Great airflow and quiet, nice blade design - SATA power instead of molex - Can hook 10 fans and 2 LED strips to the controller (though proprietary) - Can confirm the fans work good on a radiator - Good wire length - Saves setting on power off and unplugged - Full coverage RGB, has rings on the front, back and sides, and the blades are lit CONS - Proprietary fan plugs - No PWM for speed control - If the remote were to break or get lost, there's no alternate way to change colors and effects unless you're using everything synced with your motherboard, and you wouldn't be able to change fan speeds. - Basic remote, works fine but takes ages to cycle through all the effects - Doesn't seem like you can control brightness unless you use a solid color - All fans run the same speed at all times. Would be cool to be able to control different fans speeds separately, like faster or slower speeds for intake or exhaust Time will tell how they hold up, but so far so good! Will update if anything changes.

These fans are amazing the RGB is so bright and vibrant. Super quiet and great airflow easy installation with the module included. Tons of presets to go through with great patterns.

Great airflow, near silent on medium fan setting, beautiful rbg, and one of the only 6 pack kits you can buy online. My case holds 6 fans. For $50 dollars, I cannot complain. Build quality is okay, but be easy with it when installing. The cables are not going to handle any excessive force. The 3m tape for the controller does not stick on my metal case. It comes right off. I used some stronger tape that I had on hand. The fans come with a year warranty and this company actually makes a decent chunk of pc mods. Check out their website. How long will the fans last? That is the question. My recommendation would be to wait a month and see what you think of them. If you like them then by a spare kit to keep long term. These use proprietary connectors and fan controller. If it fails you will need another of the exact same, but can't complain for the price. They do sell an arbg fan set instead of the proprietary connector on their website. That way you can change out with any fan model technically. I didn't buy that one because it comes in a 5 fan kit. I've got everything paired to my arbg fan header on my motherboard. I've only got one fan header so had to use an arbg splitter to get my cpu fans and case rbg sync'd up. Works great. Some might consider it a con that you need the remote to set the fan speed. I prefer having a turn dial in my case like the old days, but get some velcro tape and stick the remote to your case. Problem solved. Most people set their fan curve to one setting and never touch them again. Put it on medium and forget about it. I'll do an update later on if I have any issues.

**UPDATE** May 18, 2024 I have upgraded my review from 2 stars to 4 stars after the Company reached out and sent me a new controller. I am standing by my original review and that the most complaints to include mine, were for a weak controller that goes out over time. But great customer service plays a part in that as well, hence the elevation to 4 stars. There is nothing wrong with the fans. they look great, run around 1200 to 1500 RPM inline with any RGB fans, so no complaints there. these do have a plug this is proprietary that doesn't allow for the use on anything other than their controller. I have bought many EZFAB products and this was my first issue and they resolved it , so props to them. **Original review** So I bought 3 more fans with the hub as my hub went out in 11 months. Fans would run, but 0 lights worked. Add the new hub and 3 fans to my already 5 and all works good. Bit disconcerting that the hub didn't last longer. Also, I am trying to cool a very hot running Sapphire RX 7900 XTX and unless i leave the sides off the fans are not turning fast enough to push the air past the dust screen. I ahve very old thermaltake fans that do way better at max speed then these. So if your buying to cooler a radiator I would look at other options. If you just need cool RGB and light case cooling these are fine with exception of the hub. And of course like other reviewers, the fans and hub are proprietary, so either you cut the fan wires or again consider other options.

The fans are great and are at a good and affordable price range for people not trying to pay too much money. First of all, all the colors on the fans are perfect except like the yellow and orange looking almost the same but that’s normal for average rgb stuff. They are very bright and vibrant. The fans don’t use too much power from the power supply so if the power supply suits your build properly. You’ll be ok. I also want to mention the noise which is very low and suit the speed of the fans so no one on game chat hears your pc. Great for airflow because there is many, could only fit three in my micro-atx pc. The fans keep the pc cool for the amount of air going in. Something no one is talking about is convenience. They have different cords to adapt to different motherboard cables which is perfect because I could not find one for my msi motherboard. The power supply one plugs in perfectly. The cable management will take a small amount of time like 20 minutes to make it look way better. They are very easy to install! Just take that time to re-cable manages for around 20 minutes every 2 months. Perfect purchase! Thank you!

These fans are great, they came in perfect condition and packaged neatly with everything in it. It was super easy to install the cables are long and easy to manage. The speed is just right to keep your computer cool. There is no vibration and the noise levels are unnoticeable compared to my old fans and the lights look amazing when synced to everything else. All in all a great product for pc cooling.

I'm no fan expert, so about all I can tell you is that these fans work, hit the RPM listed, and are quite silent in my custom water cooled PC. 2 of the fans developed a clicking sound after a few months in the system; both of them were in an exhausting configuration where they were at the top of the case. I'm not sure if orientation has anything to do with the issue, but I did want to point that out. I currently have 3 fans on top exhausting, and 2 fans on the bottom as intake. 4 of 6 fans have had no issue thus far. I personally like the RGB set up with the ring around the edge as well as the hub in the center. I haven't done any comparisons against other fans, but my temps have been well within expectance since I first installed them. The RGB hub is a decent size and easy enough to integrate into other RGB ecosystems. Regarding the clicking sound; I reached out to their customer service, and after sending a video of the issue, I received 2 replacement fans at no charge, with no need to send the old fans back, and they arrived within a couple of days. Very happy with the experience overall!

EDIT: The required hub really ruins this set. You'll be chugging along, and suddenly your whole rig is flashing some random pattern that annoys you. If you have no interest in using the hub for RGB control, want to just use motherboard control, avoid this set. The fans are bright and colorful, the noise level is quite low, and the quality of their assembly is very high. If you just want all your fans to connect and work together, I'd say it's worth it. My solitary gripe with the system as it's intended to be used is that the included hub will occasionally forget what setting it's on, and start playing new effects all by itself. Like, often. Multiple times per day. Keep the remote close. If you like to tinker with things, there are some caveats: I broke one of these apart to learn its secrets, and unfortunately you will not be able to independently control the LEDs around the fan and ring. There are 23 LEDs per fan, but if you connect this up to an ARGB controller with appropriate per-LED control, you'll find 15 addressable LEDs, with the first 8 controlled in common between the ring and fan. This means that the bottom half of the ring around the fan is addressable separately from the fan, but that's it. After taking a peek at the hub, the proprietary connections can be bypassed if you're wanting to rewire these for standard 5v ARGB connectors. The 4th wire from the striped wire is not used, but will block the data signal if connected to anything (nice try). The included hub doesn't actually use that wire either. It's included exclusively to deter you from rewiring the LEDs. If your design intention doesn't require that the rings be separately controllable, and you can live with the quirky controller for the (considerable) cost savings, I can recommend this kit.

Estoy muy contento con la compra, aportan una excelente estetica a la PC Gamer, puedes sincronizar la iluminación con la MB, en mi caso tengo una Asus y se sincroniza muy bien con el Aura Sync y el ARGB, tambien tiene un control remoto con el cual puedes configurar de forma manual el color, personalmente prefiero mantenerlo sincronizado, sin embargo se agradece la posibilidad de poder apagar la iluminacion rapidamente con el RC, lo unico que no me gustó es que no se sincroniza la velocidad de los ventiladores con lo que necesita la MB, sin embargo yo lo mantengo al maximo y el ruido realmente no lo escucho, en general me agradó mucho la compra y lo recomiendo totalmente, por cierto viene con el HUB para conectar todos los ventiladores y sincronizarlos.

Value for money and easy installation.

Good for PC case air flow silent

مره ممتازة عادية وليست عكسية رائع والتاجر محل ثقة

Bad