We are sorry to announce that Beta75X HD is discontinued and
will not be available for sales anymore. We recommend you buy its
great alternative Beta75X HD Digital VTX. The Beta75X progression
continues. The latest version of the Beta75X HD whoop comes
equipped with the Turtle V2 camera and rocks 3S power. Madness!
Compromise? Not here. Experience the boost in power and
performance, all while capturing it all on HD video! For those of
you who crave a little lunchtime session at your local playground
or blasting through gates at your home racetrack, this little
beast is for you. True acro performance in a whoop – The new
Beta75X HD (along with its bigger brother the new Beta85X 4K)
ushers in a new era of 3S whoop drones. With a huge improvement
in power-to-weight ratio, you can now fly real acro yet still
enjoy the convenience, safety, and quietness of a whoop-sized
frame. Dialed-in tuning – Running the high-performance
STM32F411CEU6 processor flight controller board and finely tuned
with BETAFPVF411, fly like a pro right out of the box. Superb
video – Capture high-quality video and high-definition DVR
s with the Caddx Turtle V2 on Beta75X HD version (4K on
the Beta85X 4K!). Tough and agile – The custom frame is both
durable and light. It weighs in at only 57.6g. The setup coupled
with a 3S battery will provide a punch that’ll put an ear-to-ear
grin on your face. Fiddle less, fly more – All-in-one and ready
to fly, just plug-and-rip! The custom 1103 8000KV motors come
with cable connectors, so if you can plug in a battery, then you
can start to fly. 3S power and performance – Engineered to
perform best with 300mAh 3S battery. Bright lights – Look at all
the pretty lights! Custom slot allows you to slap on our LED
strip, hassle free. Light it up! Weight:57.6g (without battery)
Motors: 1103 8000KV motor with connector Props: 40mm 4-blades
props, 1.5mm shaft hole Camera: CADDX Turtle V2 ( for HD DVR
version) Canopy: Canopy for Beta75X (HD DVR) Receiver Option:
Frsky XM+ / DSMX / Futaba S-FHSS / Flysky Frame: Beta75X Frame
Recommend battery: 300mAh 3S 45C Battery (Not including) For 75mm
brushless whoop drones, there are 3 versions for your choice -
Beta75X 2S, Beta75X 3S, Beta75X HD. It’s highly recommended that
you feed this little beast with the newest 300mAh 3S 45C battery.
The maximum current requirement for this drone is about 11A, so
do NOT use 3S 300mAh batteries under 35C. The FC for this drone
is the F4 2-4S AIO 12A FC board. For detailed specifications,
check out the FC page. Here’s a quick overview: FC CPU:
STM32F411CEU6 (100MHZ ) Six-Axis: MPU6000 (SPI connection) Size:
26mm x 26mm, whoop ing pattern Firmware version:
BETAFPVF411(BEFH) OSD: Built-in BetaFlight OSD (STM32 controls
OSD chip over SPI in DMA mode) Receiver: Support Frsky XM/XM+
Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire
Receiver. Add Frsky R9M Receiver and DSMX receiver since V1.2
Support programmable LED like WS2812 Built-in current sensor
Weight: 5.6g ESC Support BLheli/BLHELI_S suite Pass-through ready
Support PWM, One125, One42, Multi, D150,
D300, D600 Input voltage: 2S-4S Lipo Continue current:
12A Peak current: 13A Firmware: BLHELI_S Processor: SILABS
EFM8BB21F16G Motor Connectors: 1.25mm header pins connector
Factory firmware: G-H-30-16.7 Inspired by the innovation of the
community and its pilots who were throwing HD cams on their
Beta75X, we re-engineered this new version to meet their needs.
So yea, put away your cable ties, twist ties, rubber bands, and
hot glue s. Just throw on a battery, go rip and capture it all
on HD. For more details on the Caddx Turtle V2 camera, check this
page. Our newest A01 VTX board is lighter and perfectly suited
for the canopy. The VTX’s output power is switchable, between
25mW and 200mW. Smart audio is available for VTX remote control
by default. Output power: 25mW and 200mW (Adjustable) Smart Audio
function is included for radio control Frequency: 5.8GHz 6 bands
48 channels, with Raceband: 5362~5945MHz Caddx Turtle V2 camera
TV System: NTSC Aspect Ratio: 16:9(non-changeable) Image sensor:
1 / 2.7" CMOS sensor 1 * Beta75X BNF 3S Whoop Quadcopter (without
battery) 1 * Spare 40mm 4-blades props (2CW+2CCW) * Battery is
NOT included. Highly recommend the 300mAh 3S 45C battery.
- True acro performance in a whoop – The new Beta75X HD (along with its bigger brother the new Beta85X 4K) ushers in a new era of 3S whoop drones. With a huge improvement in power-to-weight ratio, you can now fly real acro yet still enjoy the convenience, safety, and quietness of a whoop-sized frame..
- Dialed-in tuning – Running the high-performance STM32F411CEU6 processor flight controller board and finely tuned with BETAFPVF411, fly like a pro right out of the box..
- Superb video – Capture high-quality video and high-definition DVR s with the Caddx Turtle V2 on Beta75X HD version (4K on the Beta85X 4K!)..
- Tough and agile – The custom frame is both durable and light. It weighs in at only 57.6g. The setup coupled with a 3S battery will provide a punch that’ll put an ear-to-ear grin on your face..
- Fiddle less, fly more – All-in-one and ready to fly, just plug-and-rip! The custom 1103 8000KV motors come with cable connectors, so if you can plug in a battery, then you can start to fly..
- 3S power and performance – Engineered to perform best with 300mAh 3S battery..
- Bright lights – Look at all the pretty lights! Custom slot allows you to slap on our LED strip, hassle free. Light it up!.
- Weight:57.6g (without battery).
- Motors: 1103 8000KV motor with connector.
- Props: 40mm 4-blades props, 1.5mm shaft hole.
- Camera: CADDX Turtle V2 ( for HD DVR version).
- Canopy: Canopy for Beta75X (HD DVR).
- Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky.
- Frame: Beta75X Frame.
- Recommend battery: 300mAh 3S 45C Battery (Not including).
- CPU: STM32F411CEU6 (100MHZ ).
- Six-Axis: MPU6000 (SPI connection).
- Size: 26mm x 26mm, whoop ing pattern.
- Firmware version: BETAFPVF411(BEFH).
- OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode).
- Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and DSMX receiver since V1.2.
- Support programmable LED like WS2812.
- Built-in current sensor.
- Weight: 5.6g.
- Support BLheli/BLHELI_S suite Pass-through ready.
- Support PWM, One125, One42, Multi, D150, D300, D600.
- Input voltage: 2S-4S Lipo.
- Continue current: 12A.
- Peak current: 13A.
- Firmware: BLHELI_S.
- Processor: SILABS EFM8BB21F16G.
- Motor Connectors: 1.25mm header pins connector.
- Factory firmware: G-H-30-16.7.
- Output power: 25mW and 200mW (Adjustable).
- Smart Audio function is included for radio control.
- Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz.
- Caddx Turtle V2 camera.
- TV System: NTSC.
- Aspect Ratio: 16:9(non-changeable).
- Image sensor: 1 / 2.7" CMOS sensor.
- 1 * Beta75X BNF 3S Whoop Quadcopter (without battery).
- 1 * Spare 40mm 4-blades props (2CW+2CCW).