Rotary Tool Multi-Vise, 3-in-1 Attachment, 360º Stationary Vise, Stand-Alone Clamp, and Tool Holder, 2500-01

I bought the Dremel 2500-01 Rotary Tool Multi-Vise, 3-in-1 Attachment with 360 Degree Stationary Vise, Stand-Alone Clamp, and Tool Holder , Grey to hold small wood carvings boxes, and other wooden forms as I work on them. I was a little hesitant but figured the price for the Dremel name would be justfied...and it is. Pros: ⁂ Easy to maneuver ⁂ Fittings are snug so pushing chisels and knifes through projects does not loosen them ⁂ Fittings are large enough to operate by hand without need for pliers or tweezers Cons: ⁂ Not sturdy enough for mallet work ⁂ Odd shape gives a large footprint for storage All in all an excellent tool I hope to use for many years,

I am writing this review to inform those who may want to use the vice as a tool holder with a Dremel Flex Shaft attachment. I will try to explain this as clearly as possible and hopefully the pictures will help. Because of the thickness of the Tool Holder Adapter that comes with the vice, when the the Flex Shaft attachment is threaded onto the nose of the motor the nut bottoms out and the Housing on the Flex Shaft Attachment does not come up tight. If you use the tool this way, when the shaft is manipulated the spinning Cable Adapter will contact the Housing on the Flex Shaft Attachment and make a grinding noise. What is needed is a spacer with the following dimensions: Inside Dia.=0.450, Outside Dia.=0.650, Thisckness=0.080 inches. The spacer is placed inside the plastic nut that attaches the Flex Shaft Attachment to the motor, and up against the metal Housing. This makes up for the space created by the Tool Holder Adapter that comes with the vice and eliminates the play that allows the parts to grind. I really like the features of the vice and this method of holding the tool works great for me. I think it is much better than the tool holder posts that you hang the Dremel motor from. It would be nice if Dremel provided this spacer with the Vice for those who intend to use the vice as a tool holder when using the Flex Shaft Adapter.

This vise worked perfectly to hold my Dremel and the sharpening tool. It secured my Dremel well to the table due to the excellent design of the clamp. Most clamps have a small metal fixed jaw and it will slide around and reduce the tension that can be applied to secure it. Other clamps will also damage the table top. This table clamp does NOT have that problem. The fixed jaw is big and it is a non skid pad so that the clamping pressure helps to firmly secure it to the table without damaging the table top. You don't need a great deal of clamping pressure to secure the clamp to the table, and still have it moving around, like most "C" clamps. It is a great design. It also comes with a tool that allows the Dremel to be securely attached to the clamp, as well as an additional vise for attaching other items to the clamp. The Dremel itself can be adjusted to slight horizontal angles, if needed, and then tightened down by hand easily so that it will not move. This is an excellent table clamp and vise for working on small to medium items. I used it to mount my Dremel to sharpen blades for a mixer, and, it worked as well as a bench grinder. Great little tool and problem solver. I ordered it for work and my boss was very impressed with my choice and the way the product solved the problem. Highly recommend.

The idea is great and allows for clamping projects at a variety of angles. The ability to clamp a rotary tool is also useful. However, the amount of plastic used is excessive (especially in the screws), and likely limits the vise's longevity as plastic becomes brittle with age.

This is really nice. A little bigger than I thought. I am very happy with this and would highly recommend it. It looks extremely well made. It will work as a clamp and as a mount for the Dremel. This is going to make so many things way easier. Buy it, you'll like it.

Is a great product for detail deemed work! So basically you can tighten it in multiple locations to set it at the right angle and spot go roti to work and will grip your work piece, very easy you use, also can switch it to hold your Drexel tool instead, that way you can hold the work piece up to it and it’s firm and won’t bounce on you, very useful tool in my opinion, and have been using it for every project since I got it a few days ago!

Works amazingly and it gives you many angles to hold things in as well as with the part your able to put on the vise holds the Dremel machine in practically any position you’ll need for your project

This was a little larger than I expected, which was a nice surprise. You can use it a number of ways - with/without the mounting base, and it is adjustable to 90 degrees even though some users say it isn't, you just have to think through the spatial relationship of the base and the arm. The clamp is robust in clamping yet also fine enough adjustment not to damage delicate items or surfaces. This is a tool you'll find useful for many years and for many tasks. I've performed cuts, grinding, polishing, repair, cleaning, soldering and painting using this vise. Definitely one of the better designs for this type of vise, and being Dremel brand I can count on parts and service should anything go wrong.

Dream cum true for DIY

Good addition to my Dremel collection !!! It’s working fine so far so fingers crossed …

Perfecto, la caja llegó un poco golpeada que es algo normal, pero fuera de eso, el producto está muy bien, es justo lo que esperada

Wonderful product. Does exactly what I purchased it for and so much more. Package was delivered under 24 hours.

Holds things in place for carving