LED Strip Lights Warm White 2700K, 12V 16.4ft, UL Listed

These are great! I replaced some older under cabinet led strips that had always suffered from a green hue. These do not have that same problem the high CRI of these lights is very noticeable. The install was easy as I had most of the wiring done, I just needed to solder them in. I installed them in some aluminum channel with a diffuser and they came out very professional looking. The adhesive is extremely strong and difficult to unstick if you need to reset the strip. The light strip construction itself seems more robust than other LED's strips I have used. Great lights and worth the money!

Works well. Pretty easy to install, if you know how to solder. (The "solderless gapless" connectors don't work worth squat.) It's much easier to just cut wherever you need, and solder directly. Far more reliable, too. I spent half an hour trying to get the connectors to work, before throwing them out in frustration. According to the manufacturer, soldering doesn't void the warranty. Using 18, 20 or 22 gauge copper wire works fine.For more than one 16 ft spool, don't connect them together in a single string (series). Instead, connect different spools separately, and join them together at the power supply. (parallel) Or even better, use a separate power supply for each spool.A 60 watt power supply is recommended for each 16 foot spool. So either buy a power supply for each spool, or a higher wattage one to join together. (i.e. 120 watts for 2 spools, etc.) Using a higher wattage power supply than bare minimum will ensure it lasts a long time, and it doesn't use more electricity. I selected ASIN B07TF5M4YN, "Dimmable Led Driver 12v DC 60w quiet operation universal regulated led driver dimmable low voltage dimmable transformer Input/Output Isolation Protection Transformer for Constant LED Products"

16' reel. I liked the 12v, the 2700 degrees, the female plug on the outside and the male plug on the inside (to daisy chain them if desired). The lights can be dimmed with little change of temperature and color. Time will tell if the individual LEDs hold up, but having them denser makes a few quitters less noticeable. The blobs of solder make it easy to attach to wires, if needed. I also liked the fact that in my usage, about 12" about the counter, there is is little individual light effect, if any. I did not use a track or diffuser, for that matter. Just CA'ed them to a wood strip. That way if I wish to replace them with a cooler temperature, all I have to do is to unscrew the wood strip and then peel them off the strip and replace. I have yet to measure the current used, but they seem to be reasonable. All in all seems to be a good product although a bit pricey.

The directions are minimal to say the least and do not reflect the actual product, the videos are not much better.The spices are extremely difficult to make, they do not clamp the wires well.

Mounted these on the inside aluminum C channel such that they fire at the opposing inner wall as a diffuser. Works great! Also acts as a heat sink to dissipate the heat these DO generate. (I really recommend this for the longevity of your investment) It's high brightness, yet evening-friendly color temperature, makes it ideal for seeing things plainly and getting things done at night without either straining to see, or hyper stimulating my pineal gland or nervous system at night with light in the blue spectrum. The color temperature is relaxing. A great combo of traits for my purposes.

I've used these strip lights for several different projects over the years. I've put at least three sets in bookcases, and I recently put in under-cabinet lights in my kitchen.I've seen other reviews that say the adhesive comes loose with age, but I haven't seen that in my installations. I always make sure the location I'm mounting them to is clean (I wipe it all down with isopropyl alcohol, and I always solder the connections.Some of my lights have been in place for four years, and they still stick firmly.

I installed these lights in our kitchen remodel as under-cabinet lighting. The color temperature was just right for our application. We used MUZATA mounting trays with snap-in lenses (also on Amazon) and SEZO C01W controllers. I cannot say enough how well this works and how it enhances the look of our kitchen.

I purchased this lighting to use as cove lighting for my kitchen remodel. I waited to install after the construction was done. The allotted time to return this product has lapsed so I cannot return it.The size of the wire of this strip lighting does not accommodate for the voltage drop that only allows for 16 feet of strip. In border to fix this issue my electrician had to use a jumper wire from the transformer to the second set of lights.Unfortunately, I bought enough to cover for under cabinet lighting and we will have the same problem again when we attempt to install that.I also bought the LED driver and dimmer in one by Hitlights and that is not powerful enough to run 38 feet of strip light. I also cannot return that.This did not work for me. I wish I could return it.