Maximize your Jeep's dashboard with our Jeep Wrangler JK Phone Holder Our innovative cell phone mount lets you simultaneously affix your smartphone and your GoPro to your Jeep dashboard to capture all of your exhilarating travels. With 2 20mm ball mount heads, a Carbon Fiber / Kevlar blend mounting arm, and 360-degree rotation of the spring-loaded phone holder, the Bulletpoint Mounting Solutions Phone Dash Mount delivers the most positioning versatility for your phone, GPS device or action camera. Designed specifically for your Jeep Wrangler JK Unlike unreliable suction-cup based mounts that are supposed to fit any vehicle, our cellphone dash mount for Jeep features a JK-specific mounting base that uses the existing 7mm fastener on your dashboard, eliminating any drilling or other modifications. The device bracket itself needs only 1 hand to operate, sliding open to add or remove your phone. It is compatible with all iPhone smartphones as well as Android phones of similar dimensions from Google, Samsung, LG and more. Live-stream from your dash, use turn-by-turn navigation, or enjoy hands-free talk and text. You'll stay in touch with loved ones and let social media followers feel as if they're sitting in the passenger seat. Built for the long haul Your Dash Jeep Phone Holder is covered by a Lifetime Warranty for your peace of mind. It also includes a 30-Day No-Questions-Asked Money-Back Guarantee. In the unlikely event that it should cease to perform as promised when used as intended, return it and we will cheerfully replace it. Add the Bulletpoint Mounting Solutions Jeep Wrangler Cellphone Holder and GoPro Mount to your Jeep Wrangler JK today.
J**N
Looks Good but Made In China it says on the backside of the box
So before purchasing i asked in the msg Made in ? and someone replied USA well its not and its not cool to reply with wrong info coz i purchased it instead of 67 design coz of that reply. i will never pay that much for Chinese product as i know how it will be made. Although this product looks well made but i can see the rubber and the adhesive will not last and time will tell i will update my review once installing and testing so far 3 stars coz made in china and they are hiding this info
S**M
Probably the BEST Mount for Phone and GoPro in a JK!!
The media could not be loaded. After trying out three different mounts for the JK, I realized that I needed a sturdy mount that would actually HOLD the iPhone 12 Pro Max.The vent mounts won't work as the JK has large blades that fully rotate on their axis and are wider than any vent mount I can find.The next mount was the Belkin Magsafe that works GREAT in a a regular car, but again, the round vents and the blades are fully rotatable...it just sags down and it's not a good fit for a JK.Next try was a suction mount with a long arm and a back hing to move the mount up and down. While it did stick to the surface, the phone was blocking the view of the road.I had seen this mount on Amazon and realized this was the BEST solution.This sits in the tray, mounted down with the 7mm nut that is already present and some 3M tape that is pre-attached to the unit.So here are clear cut directions to ensure that you have it well mounted, if you have the factory radio:1) Remove the tray from the top of the JK dash.2) Using a 7mm socket, take out the nut on the top and make sure you don't drop it!3) Clean out the debris and dust that may be under the rubber tray. I used paper towels and Windex.4) Next take two or three alcohol wipes and clean EVERY SURFACE including the sides, bottom and top of the tray bin.5) Allow it to dry completely.6) Without removing the protectors on the 3M tape, put the nut into the mounting hole and line it up with the hole you took it out of.7) Make sure you can see how close the front edge needs to be as you DO NOT WANT TO REMOVE THE TRAY AND RE-ARRANGE IT ONCE IT'S DOWN.8) Now take off the protectors and with the nut in mount, get close to the top of the bin and start the nut into the hole.9) As you tighten the nut, you will see where the mount needs to be securely pressed into the the bin and against the side closest to the passenger compartment.10) Press the mount down and back against the bin wall closest to you AFTER you have tightened the 7mm nut.11) Once the nut is tight, use your hands to press down to ensure a FIRM seal on the tape on the bottom and the side.12) Tighten the nut a few turns and press down again.13) Tighten it all the way - don't over do it!14) Allow it to cure for 24 hours.15) Now attach the mounts and adjust them to your fit!I hope this helps as I had read that some folks had issues with how loose the mount was for them.
J**O
Very sturdy and easy to install. Shaky video.
The only issue is the double sided tape, it is very weak and was sagging within 24 hours.I made sure to clean with alcohol wipes and let dry before installing it. Yet it didn't make a strong bond.I removed it, cleaned off the tape, and applied gorilla double sided mounting tape and it seems to be a much better bond than what was supplied.So if you buy this, keep in mind you will also need to purchase a strong double sided mounting tape.Update: it is very shaky when I did a test video on surface streets. I can't imagine how shaky it will be when I am offroading. I have to figure out a way to keep it more steady.
S**R
Perfect mount for my Jeep Wrangler JKU. Sturdy and rock solid!
Nothing to dislike about this mount! Bolts into the tray area on the dash. No sticky 3M tape and the phone mount holds my Samsung S21 Ultra with my Otterbox case perfectly. The additional action cam mount works perfectly with my DJI Osmo Action camera. Mount arm is the perfect length, too. I love this mount!Before I purchased this mount, I tried 4 different mounts, including a cup holder mount. Hated them all. Whatever the dealer used on the dash when they detailed my Jeep keeps any sticky tape from holding, and vent mounts suck, especially in jeeps! Cup holder mounts are too low and inconvenient. Window mounts block the view too much.Then I saw the Bulletpoint mount and figured why not! First off-road outing in my Jeep and phone was rock solid in this mount! Didn't fall out once and could move my phone where I need it at the perfect angle to use my GPS program. My jeep is a 2018 JKU without the media screen so didn't block anything important. Looking to get the tablet mount in the future so I can use my GPS on the bigger screen.
P**N
Very Happy
Although I have an 07 JK and this was designed for an 11 and up I went ahead and ordered it thinking I would have to do some engineering. I lucked out and it fit perfectly in my aftermarket dash topper. I am very impressed with the quality and function of this mount. Looking forward to also mounting a GoPro to the extra included mount. This system is very versatile!
R**E
Great mount
This mount is awesome. It's also part of a great overall solution to mounts and power in the dash. The pictures don't show the adapter as its hidden by the dash. However, the whole solution is solid.The desire was a solid phone mount in the dash of a Jeep Wrangler that included USB ports to eliminate the cords running from the power adapter up the face of the dash to a phone/camera.I'm VERY happy with the results. I did not need any parts beyond what I list below. I did need to remove most of the dash, and drill one small hole for the USB port for the wires to go through. (The dash does not have enough space under where I mounded the ports to embed the ports. It had to be a surface mount.)The parts I used:Power Adapter: https://smile.amazon.com/gp/product/B08CD6QDRC/ref=ppx_yo_dt_b_asin_title_o06_s01?ie=UTF8&psc=1USB Port: https://smile.amazon.com/gp/product/B08DFR571Z/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1Mount: https://smile.amazon.com/gp/product/B07V9B4V4M/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
D**N
Solid
Solid, I like it, I think the two way tape that sticks to the inside of the dash isn’t very good but that’s not a big deal for me, I’ll just put some better 3m tape on it
Trustpilot
5 days ago
1 week ago
