Roving Cove HeftyFit Edge Corner Protector Baby Proofing (Large 18ft Edge 8 Corners), Heavy-Duty, Soft NBR Rubber Foam, Furniture Fireplace Safety Bumper Guard, 3M Adhesive, Oyster White (Off White)

Love these things. Brought several already in different colors. Different colors allow you to blend it in with what you are planning on sticking it onto. I brought the off white and brown, and they are surprisingly not as visible as I originally thought it would be. They blend in like it was apart of the table or edges. Easy to use. Cushion is just right. If you get the thicker one it's s bit puffer but more protection from bumps. It has already a placed in adhesive strip. Peel it off and then stick the bumper to any edge you choose. Very functional. Definitely with recommend.

This is a great product. Very easy to install and looks really nice against the brick on my fireplace. It doesn’t stand out, just blends in nicely. It feels pretty cushioned. With any luck my son won’t need to use it, but I’m happy we have it. The only thing I would like to note is that you do have to apply the double sided table to the rolled up part of the protector. This isn’t difficult but it was a bit of a pain.

This stuff works great. Cushiony. Perfect to prevent little ones from hurting their heads on sharp corners and marble window sills in our case. Easy to put on. Can cut to size. It’s white so not hidden on darker furniture. The bulkiness is what makes it work. We have used clear plastic corners before and they are sleeker and less visible but are hard so don’t help much.

It's good, just not 5 star worthy. First off - 0 issues with the sturdiness of the adhesive and quality/comfort of the material. While I don't use this for baby proofing, I use it on the corners of my desk I like putting my feet on and it's saving my feet for sure and staying secure through my body weight. My main issues holding back 5 stars: 1. there are some indents in a few places on the material from shipping/packaging. Minor annoyance. 2. If you're going for absolute precision, cutting to length is a bit tough to make it a perfectly straight edge (probably user error, overall close enough) 3. The largest complaint, and one they acknowledge on the packaging - the way it comes in a coil makes the installation and prep process very annoying. This wasn't obvious to me, but you have to uncoil the material, and lay it flat for 12 hours before applying the adhesive. It's fairly long and coiled tight - so I had to place books along the length to keep it straight. Simply very annoying to have to do. I got impatient after 5ish hours with some of the shorter distances I wanted to cover and after some careful somewhat difficult application of the 3m tape, was able to apply it without waiting 12 hours without issue. 4. Again due to the coiled way it's packaged - towards the end of the coil where it's the tightest wound, the material is noticeably wrinkled and unattractive. 5. Mentioned earlier - but having to manually apply the 3m tape to both sides of the padding and cut that to size as well is annoying (I know they're working on it). 6. Lastly - and I didn't see it mentioned - but when applying the padding due to the shape and nature of the adhesive, if you want it snug, it needs to be applied in a fairly specific way to be consistent over longer stretches. Peel 1 side first and attach that, then slowly peel the other side off and lift lightly as you go so the adhesive backing doesn't rip. Through these challenges and learning curves, overall it's a good product at a good price and I would recommend it. Now that I've learned some of what I've mentioned here I'd be comfortable buying it again - just keep these details in mind.

Works well. I’ve had this padding up on my doorframes for about 2 years now for my blind dog. The padding is still soft enough and the adhesive has held. I removed it in a couple of places and it took some of the paint off of the doorframe. Still worth it for me since it provides protection from the corners and I can sand and repaint the door frames. But beware that the adhesive is strong. I wouldn’t use it on a stained wood surface in case of damage.

These are outstanding! Easy to apply, very thick protection. Purchased to protect new cabinetry and vanities going into a renovated bathroom. They are doing the job well all the workers are bumping around finishing up. Cannot recommend highly enough.

Not easy to install at at! At least for me. It comes in a coil so getting it to sit flat to measure was a challenge. As was cutting it. I just used a scissors, as it didn't give any specifics about what to cut it with, but because of the thickness, which is something I really like about it, it was difficult to cut in one slice of the scissors and as I later discovered, turned out to not be a straight edged cut. To top it off, I really should have cut them longer than the actual measurement, (I REALLY WISH THIS HAD BEEN SUGGESTED IN THE VERY BRIEF INSTRUCTION PAPERWORK) because even though I tested them out without the adhesive tape on it, they still ended up being the slightest bit too short, so that the ends don't line up to the corner pieces perfectly. Which brings up the adhesive tape...also difficult to put on due to the curvature of the strips, especially since mine were long (33") Now that said, after installation, from a distance it looks fine; but close up, as you can see from the photos, the ends of each strip don't line up great, so it doesn't look as good as I had hoped. Now maybe that's to be expected of baby-proofed furniture, but I had expected different results from all the reviews. I will say however that it does look like the protection I was after when I bought these thick rubbery bumpers (I have yet to try it out with my grandson), just way more work to install than anticipated, and not exactly the aesthetic I was hoping for.

This baby foam is a lifesaver when you have a toddler running around the house. The length is generous and covers most tables without needing to piece together multiple strips. I got enough out of one pack to cover the coffee table and still had plenty left over for other spots around the house. That extra length makes a real difference when you are trying to childproof quickly and efficiently. We also put strips on the back of chairs so our toddler does not smack their head when they inevitably back into things. Kids have zero spatial awareness and they are constantly bumping into furniture at exactly head height. This foam cushions those impacts and turns what would be tears and crying into minor non-events. Peace of mind for us and fewer bonks for the little one. The adhesive holds well and has not peeled off on its own. I was worried it would start curling at the edges or fall off after a few weeks but it has stayed put. The foam itself is soft and squishy, which is exactly what you want. It absorbs impact rather than just being a thin layer of decoration that does nothing. Installation is easy. Clean the surface, peel the backing, stick it on, done. It conforms to corners and edges nicely without a lot of fighting or repositioning. The slim profile means it does not look bulky or ridiculous on your furniture. It is noticeable if you look for it but it does not make your house look like a padded cell. The color blends reasonably well with most furniture. It is not invisible but it is not an eyesore either. Function matters more than aesthetics when it comes to keeping your kid safe, and this delivers on function without being ugly. A fair tradeoff in my book . For any parent dealing with a toddler who treats furniture corners like magnets for their head, this foam is worth every penny. It is long enough to actually cover what you need, sticks well, and cushions impacts effectively. Simple product that does exactly what it promises. Cannot ask for more than that when child safety is on the line.