VHT SP999 Night Shade,Black

i have a 2006 Honda Pilot- i wanted to give it a more rugged appearance. i absolutely recommend this product. great value for the money. just be sure to read the can!!!

This stuff works great. I dont have the patience to vinyl wrap things so perfect product. Start of light and repeat until desired effect is achieved. Make sure you tape off the surrounding areas.

Purchased to tint amber grille lights, the product worked perfectly. wanted the lights to be hidden when they were off, the color matched the grille exactly. with the lights on, the LEDs show brightly. I did use a few coats of clear. I did not sand between coats as it is not needed. Advice: go slowly and check the lights after each coat. also, clear coat within 10 minutes of final tint coat. use at least 2 coats of clear. (I used 6). Drying time is 10 min to touch(apply clear within that time), 24 hours to cure.

It had worked good just make sure to let dry all the way in between layers. I added a clear coat after because it had a little matte look for mine.

If you're aiming to give your vehicle a bold, custom appearance, the VHT SP999 Nite-Shades Lens Cover Tint is a must-have! 🖤 This translucent black spray is designed specifically for tail lights, fog lights, and turn indicators. When applied, it gives your lenses a sleek blacked-out look that remains illuminated when the lights are on, maintaining visibility and safety. 🚗💡 The application process is straightforward: clean the surface, apply light coats, and let it dry. It's recommended to use 2-3 coats for optimal results. Just remember, once applied, it can't be easily removed, so ensure you're satisfied with the look before committing. ⚠️ For those seeking a unique, European-style aesthetic, this product delivers. It's perfect for DIY enthusiasts looking to personalize their ride without breaking the bank. 💰

Excelente 👌

I purchased this to 'paint' the lamp lens on my new F150. On my old truck, I'd pull the bulbs and replace them with red, but most of the lamps on the new F150 are integrated LED. I do night fishing and star-gazing so to preserve my night vision, red light is the way to go. My first try was on a set of curved lights from the bed. I pulled them, wet sanded with 400 grit and sprayed. It took abut 4 coats until it appeared to be dark enough. I let them dry overnight and found that the paint had cracked. I wet sanded again and did several more coats. No cracks this time, but the color is more pink than red. FWIW, I painted bikes for several years, so I feel that I can handle a spray can OK. After a month, the paint seems to be holding up pretty well.

Use it to turn reverse light lens from white/clear to red…. Looks really really good. Alittle pricey but well worth it

Covers well and produces a very nice translucent effect.

Lo e usado por años y muy fácil de usar.

Easy to use - looks top notch! Durable and instantly changes the look of your lights. Highly recommended!

Does the job well. Nice shade of 'true' red, but color does fade in direct sunlight. Recommend clearcoat to preserve gloss.

Terrible quality. Dont buy. Look into alternatives. Fades insanely fast into a pink. Also runs like water, despite proper prep and not over spraying, etc. Was shocked at the poor quality of this product. Stay away