Yuanshikj 70" Tall,12" deep,3/4", Industrial Iron Pipe Shelves Black,2Pc

Love how these shelves turned out in my new apartment. I had no idea, design wise, what I wanted to do with these at first. I initially purchased one set for my bathroom but after looking through more reviews and pictures I decided that they would be a better fit in my living room. So I ordered another set and proceeded to create my masterpiece.Love the fact that you can put sets of these together to make one larger shelving unit. I had the bright idea to buy two 2x12x12 to run along the top and bottom and four 2x12x3. While driving home with lumber strapped to my compact SUV wasn’t ideal, I’m excited to get these babies sanded down and pick out a stain.As for assembly, I put each of the pieces together disregarding the alignment at first. Then, once everything is connected, lay the whole thing down on carpet or a rug, and crank down on each connection until everything is nice and tight. Hanging these up by yourself is hardly easy but doable. It would have been nice to have someone who could hold them against the wall while I worked. I also took the advice of other reviewers and bought my own anchors and screws. With the anchors and 2in thick shelves, this thing is SOLID, and I love the way it looks. I’m planning on a tv going up in the center to finish it off. Very happy with these.

The best choice I've made to help declutter my space

This is four sets of these shelves. I mixed them around a bit and made my own configuration that fit my workout room/office. Great space saver to put everything on the walls vs the massive desk and bookshelves I had. I used a lot of 3/4 pvc elbows. They have the exact same thread as the pipe and are much cheaper. Just spray painted them black. This has given me so many more ideas of things I can do. Look out house. I see a lot of pipe in your future. If you’re going to get creative and use 3/4 pvc elbows to sub for parts you don’t have then you’ll want to cut down some because the pieces are super long and make it unsquare. Just cuts with the regular circular saw that you’re cutting your wood shelves with. SAFETY DISCLAIMER: Be careful to not cut your fingers off. You have to hold it close to the blade. Pictures added for comparison of what’s included, what I bought, and how I cut it down. Still have two horizontal shelves to mount on the tv wall to match the desk wall. I used 1x4 painted to match the wall, that I mounted level into studs and then mounted my pipe flanges to that instead of trying to find studs or use any wall anchors. You can see those in the Last couple pictures. Far more sturdy and much faster than wall anchors. Good luck.

Once installed I'm very impressed with the look and feel of these. The steel is much heavier than I expected, not as heavy as actual iron plumping pipe, but much better than what you'd get at Walmart or target.The install was challenging. I am very experienced DIYer and engineer by profession, and this is a difficult product to get perfect. The pieces are not made with a ton of precision. When installing it was necessary to loosen different joint to get everything level. this leaves it a bit wobbly making it difficult to keep everything straight. After it is secured to the wall and ceiling it is very solid.Expect a challenging assemble depending on your standards, but the finished product is awesome!

Okay so what I decided to do was leave a space in the middle for my animal food storage. I will say work from the bottom up. Make sure to have a 3ft level handy. It will really help you. Now not every bar will be super tight but in the end they will all become tight. I messed up and put the longer bar in the middle instead of on the top of each section so what I had to do in order to fix it was go down to a scrap metal place and take the long bars and have them thread them down into the smaller ones with new threading done. so it was able to work out for the top. That may not make any sense but it worked out. I prefer the extra room in between the shelving. They look nice. I bought the boards from Lowe’s and had them cut down to size. They were already painted. I also would buy better screws and I put at least two screws into studs instead of using anchors which have seemed to work perfectly! I took me and some help from my mom about 4 hours to put up. I did 2 sets

I just recently bought a house and had nowhere to keep my books. In our loft, we had a storage closet that is perfect for my mini-library.Not being able to find bookshelves that would fit in an unconventional area, I decided to buy these, but I wanted them to be floor to ceiling so I bought 3 kits. The only issue I had were the screws provided were not long enough. We also decided to install them on 1x4’s screwed into the walls, but that was just for more stability since books are heavier than knickknacks.The pipes themselves are all a nice matte black, they were easy to put together, and definitely worth the price I paid. The wood ended up being an extra $100 but that was for 7 boards at 5’10” each.Would definitely buy these again! So happy with how it turned out!!

I installed these above my bed and installed 1"X12"X6' shelf boards which cost more than the brackets, I just attached the shelves on the underside with stainless steel screw on pipe clamps. I DID NOT use the included hardware, I used 3 1/2 inch deck screws and was able to get at least 3 screws per pipe flange into the stud. I really only could fit three of the four shelves, but I will be putting up more. When everything was assembled I think they might hold my weight (250lbs), they certainly make for great accessory holding positions for adult activities in bed, but they legit look like nice shelves not 50 shades of Gray central, wife gives them 10 stars as does my lower back. Put my CPAP on the lowest shelf, draped some funky Christmas lights cascading down the side, Alexa shuffle that sexy music.

This was super fun to put together and watch come together. We needed to make our closet space larger after moving into a smaller house. So I crossed this while searching Amazon and decided to give it a go. I am so happy I did!! We grabbed some pre-cut boards from Lowes and slapped them across and wah-lah! space for our towels and pants! Of course the rental company might absolutely hate us because of all the holes we made for it but oh well, it looks fantastic! We've had people ask us how we did it and I've pointed them to this kit! Can't beat it!!

What can ya say; its pipe, it screw's together.I picked this up for shelving in my basement bathroom.I used rough red cedar fence plank for the shelvesworks great. I used blue locktight once i got the pipes facing the way i wanted. Blue, so that I can disassemble later if need be.Prolight material, which does not add a lot of extra stress on the hanging pointsthe flanges offer a lot of attachment points to ensure what you put up their stays up thereeasy to assembleConlight material. if you are expecting iron, this inst it.if you are attaching to drywall\stud like me, go to the hardware store and get some good screws and anchors. the ones that come with are shyt.