EvZ 20 AWG 2-Pin Extension Wire (66ft/20M), 2-Conductor Tinned Copper Flexible Electric Cable for 12V/24V Single Color 3528 5050 LED Strips, Red & Black Low Voltage DC Cord

Great wire very flexible wire which is great for the Ease of installation and fish wire . Perfect performance with low heat displacement perfect dual wire for your project. The appearance is red and black but I'm sure you could paint it so it has better versatility .

Quality wire, the thickness was perfect, and my use of the product was perfect. Easy to use.

This is nice stuff. Wire fill is good, strips perfectly without fraying or tearing. Insulation cuts and separates easily. It does solder easily, which is important since I'm using it with very heat-sensitive audio tweeters.

Wire is OK, but not great. The price is certainly good. However, I found the wire difficult to work with as it seemed a bit stiff and was hard to strip. I was working outside in 52 degree temps, but it seemed unusually stiff for that temperature. Also, the wire gauge seemed a little thin - more what I expect from a 22 gauge. The insulation was relatively thick and made the wire feel stiffer, I think. The stiffness gave the wire a 'set' to the form with which it was shipped and didn't want to relax enough to make a neat wiring job. I purchased other similar 20 gauge wire on Amazon that was much easier to work with and its conductor was a little thicker - more in line what I expected from 20 gauge wire. Although the outside dimensions appeared the same between the two brands, the other wire had thinner insulation and was very supple to work with and easy to strip. Gets the job done, but I wouldn't recommend pushing the amperage too much since the conductor may not be a true 20 gauge.

This wire works well and meets the advertised specs. It strips well and appears to be proper 20 gauge. It is high quality tinned copper. Some of the reviewers seem to be confused by the color - tinned copper is silver, and the core is copper colored. If this were aluminum wire, it would solder very poorly, the color would be dull silver not shiny, and would be much lighter. I test soldered some of this wire and it wicks the solder properly as only tinned copper will.

I bought this so that I could run LED strip lights on my 3D printer without having to use the connectors that came with the LED strip lights so that I can connect them directly to the power supply of the 3D printer and these wires are perfect and there's plenty left over for me to do other projects with this is a great quality wire and great value for the money

Just what I was looking for. Insulation isn't too thick as it is on some wires. Ohm'ed out the 66' length and got the correct value for the 20 gauge wire. Stranded tinned conductors that soldered easily.

Product was as expected. This is the same gauge wire as the wire on the LED strip which is very convenient. Also, I don't believe this is aluminum because of the way it flexes. I believe it is tinned copper. I used it to extend a connection for my LEDs and it worked perfectly. A good price and fast delivery. I had the lights set up in no time around the bedroom ceiling. I used three 16ft strands so make sure you get an adequate power supply. The strands I purchased from Amazon need about 25 watts at 12v so around 75 watts plus 20% for safety. I ordered the 120 watt transformer so no problem there. The wire does not offer much resistance at all so the lights are all very even in brightness. Amazon saves me so much time. No going out to find expensive reels of wire at the hardware store, it comes straight to my front door. Absolutely great!