SURE SHOT A1000G 1-Quart Non Aerosol Sprayer - Refillable Pressurized Sprayer...

Tried a cheaper knock of this tool (that really sucked) before finally deep diving into the reviews and finding some one recommending this sprayer. I use a lot of Brake Clean spray and it's more expensive and a hassle to buy at the auto parts store in an aerosol can all the time. With this sprayer you can bulk buy for half the cost Brake Clean and fill this up and save a ton of time and waste. The only thing I wish this had (which may be available) is a longer more concentrated nozzle like the straw on the aerosol cans, that way you can direct more of a stream, rather than this which sprays a round pattern at about 60 degrees close to the large can, depending on how much of an air charge is in the can. It doesn't leak, the paint hasn't come off even after spilling brake clean on it when filling it up. I only had to take the nozzle off once and free up the little dispersion nipple because it was stuck from being to dry due to the brake clean. I think this sprayer will hold up for quite a while and I would buy two more of these before I would ever consider buying another of the only slightly cheaper knock offs you can find here on Amazon, this one is the real deal tool.

I buy these to fill with cleaning solutions and welding anti-spatter spray. They are durable and last a long time. This was used to replace a unit that was over 15 years old. The preay is super fine and there is little wasted material. These units save much more than the cost over time because they are efficient and dont waste so I use significantly less solution. The cleaning solution does not leak at all but the weld anti-spatter does have a slight leak around the spray trigger. Im still giving it 5 stars because i use them daily and they are high quality and do the job perfectly. A bit expensive but worth it.

This is a fantastic sprayer! It puts out a very fine spray that covers a lot of a plant.

This is a solid heavy duty sprayer. I filled it with 32oz.of Bioshield T-9 and pressured it up to 150 PSI. It sprayed a fine fist like an aerosol can does. Bioshield T-9 is a light weight product and it works great in this sprayer. It does have a removable insert in the spray nozzle to get a stream instead of a mist but I haven't tried that yet because it is the mist that I wanted. The only problem I have with it is the fill hole is extremely small and I spilled quit a bit of the expensive product that I was putting in it. I was pouring from a measuring cup with a spout and it spilled. I then used a small funnel but the end was too large for the fill hole so I had to crimp the funnel end to fit in the hole. I still had some spillage. In my opinion this should come with an appropriately sized funnel to fit in the fill hole to eliminate the hassle of filling it. I will have to purchase a small funnel just for filling this sprayer.

Works great you just have to know how to repair and take care of it.

Don’t wait. Get one and fill it with PB Blaster or rust buster of your choice. Walk around your tractor once every few months and be proactive to rusty friction points that you can’t grease. Buy the stuff by the gallon as it so much cheaper. Pull the trigger don’t pump spray.

Back when I was working in the body shop there was a guy who had one of these (though an overpriced Matco-branded one) and used it for thinner. A great tool, kind of pricey. Been wanting to get one for years, and lately I've been going through a lot of brake cleaner cans. At $10/can (sometimes better deals can be found). It was getting annoying. Finally decided to spend $65 for this thing. This is a great tool. You can do more of a mist spray if you leave the pintile intact, or you can easily remove it and have a very narrow stream. They have a hypodermic extension for it which I ordered and will see if it works OK for carbs. Would be nice if it does. They have a quick removal adapter for refilling. Not necessary for me, but could be for others. Lots of different sized extensions and adapters if that's your thing. They sell all the parts to rebuild it, and it's still made in the USA. Great tool and pays for itself very quickly if you're ripping through brake cleaner and degreaser like I do.

well made tool

Very good

I needed aerosol alcohol, which you can no longer get. I have lots of applications for spraying alcohol for manufacturing. I have to find a solution and this absolutely does do the trick. It holds the air really well and you don’t have to refill it with very often.. I wish I had an adjustable spray, but it doesn’t. One thing to note is that the spray lever at the back does not have spring on it, or if it does, it doesn’t work. You have to manually lift the lever back up to stop it from spraying. It’s pretty easy to do because of the location but don’t think it’s going to stop spring just because you’re not pushing that leave anymore.. it’ll empty the whole container unless you push back up on that lever. I can live with that and I’m not gonna take any points away. It works works well and it’s a great product.

Brilliant bit of kit

Very much like this little unit

I did read a few reviews saying that the nozzles plug or leak, however the sprayer I received performs flawlessly!