💡 Illuminate your drive with next-level style and visibility!
The iJDMTOY Xenon White LED Retrofit Kit is a waterproof, plug-and-play lighting upgrade designed for 2013-2015 Honda Accord sedans. Featuring 70 side-glowing LEDs powered at 30 watts, it delivers triple the brightness of standard incandescent bulbs, perfectly fitting inside the parking lamp housing to give your car a premium, modern look with enhanced daytime visibility.
Brand | iJDMTOY |
Color | White |
Specific Uses For Product | Head Lights |
Vehicle Service Type | Car |
Year | 2013 |
Special Feature | Waterproof |
Wattage | 30 watts |
Auto Part Position | Front |
Lens Color | Clear |
Lens Material | Polycarbonate |
Assembly Required | No |
Manufacturer | iJDMTOY Auto Accessories |
OEM Part Number | Compatible with Honda Accord 4-Door Sedan DX LX EX SE models without the OEM LED daytime running lights |
Item Weight | 2.08 ounces |
Package Dimensions | 17.44 x 3.66 x 0.59 inches |
Item model number | For 13 14 15 Honda Accord DX LX EX SE |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | 50-046 |
Special Features | Waterproof |
L**Z
Going strong after almost 4 years!
I bought these July 2021 and they’re still going strong as of February 2025! They were easy to instal, are bright, fit well, look clear, and upgrade the overall aesthetic of the headlights!
R**.
What else can I do to funk out the ride? These lights are tight.
These lights are absolutely stunning to look at. I wasn't even looking to buy them I only came online to find a replacement bulb for one side that went out. However, I happened upon these and here is my review of them in a nutshell. If you are looking for a tutorial search around the Internet they are out there. But don't be fooled, these lights are easy to connect but the installation process can be a bit difficult. I do have smaller hands. This is my recommendation to install them as quickly as you can. These tips are for a 2013 Honda Accord Sport. 1. Start with the passenger side light as it was the easiest of the two to install. Once you pull out the old bulb connect the new LED Lights to make sure they light up. If you connect the LED's and they don't light up, don't be alarmed you may need to disconnect them and rotate the connector 180 degrees. 2. Once you have confirmed the lights work, literally thread them into the open cavity where the original bulb came from but make sure the flat side of the LED's are toward the back of the enclosure. 3. Test the light once more before moving on just to make sure it still works properly. 4. The driver's side light proved to be the most troublesome for me. It finally occurred to me to remove the car battery totally in order to get to the bulb without any hinderances. I wish I had known this 20 minutes before I prayed for a solution. (FYI, I'm not that fast with mechanical things although I can program a computer. Go figure. :-) ) 5. Once you thread the light in the enclosure, reconnect the battery and test that the light works as expected. 6. Enjoy a job well done as a DYI'er.I love the blue tint of the lights but more importantly the brightness is unparalleled to me. It doesn't matter to me that they are a different color than the factory headlights I think this adds a custom touch.
B**E
Falsely advertising
Product did not come with good instructions very unprofessional did not get what I saw in picture
D**D
Works good
It works well and adds look to the car
A**R
So far so good!
Exactly as advertised! I've only had them in for less than a week, but they do exactly what they say they do which is provide a nice, uniform lighting in an otherwise lackluster stock reflector. If you're like me you probably bought the car expecting to see the beautiful led strip seen in most new cars...including the v6 accord. I test drove the v6, but ended up going with the 4 cyl EX-L (which came with one light and a series of reflectors instead of the led strip seen on the v6). Needless to say, when I got the car home and discover this I was a little disappointed. My fault for not doing the research. I'm not a "car guy", but I was able to install these in less than 15 minutes total. They are a little shorter than the actual spot in which you put them, but don't worry about trying to line them up perfectly. In my experience the vibrations from driving has placed both lights as far to the center as possible so they look perfectly aligned. I did not take the headlamp out or remove the bumper. I also did not screw the fasteners in to hold these in place. If you're looking to step up the appearance of your accord these LEDs are the way to go! I've attached a photo as well!
C**K
Quick and Easy Install
The media could not be loaded. 5/7/18 Update:3 months after install and working great the wiring started shorting out. Not at the connector but where it goes INTO the strip.Was hoping it’d last more than 2.5 months for the $50I ended up emailing the company, got a same day response, and time to call them before they closed. I am still within the 90 day limited warranty and they will be sending me a free shipping return label within 2 business days. Speaking with Cesar was quick and easy, excellent customer service!Great product, definitely worth the money for a clean and different look.Install was less than 5 mins per side, hardest part was getting to the bulb fitting.I have an AEM aftermarket CAI so, the driver side install wasn’t as bad as it would have been had I kept the OEM filter housing.Make sure your workspace (around the lights) is clean, the white strips pick up and show dirt quite easy.No hassle install, literally plug and play. If a light doesn’t function, reverse polarity on the clip.
A**W
Honda Accord Upgrade.
I wanted to spice up my Honda and I was perusing Amazon and found these and were blown away. They were somewhat easy to install and looks great at night. As other reviews have said, they are not super bright during the daytime but they still look good to me. I wish I could switch up my daytime lights to have this come on automatically but that would take re-wiring and that could be dangerous, so instead, I just flip the switch to low beams and let those run while I drive through the day. Still looks pretty nice. I do wish they would find a way to make them sit higher up in the slot but you can't even tell at night. I would highly suggest these for any 2014 accord ex-l honda owners. I own a black honda and it looks amazing.I can't comment on the longevity of this yet, but I will come back and and update this post.
P**O
WORKS ON CAPRICE PPV!
Product looks and works amazing, completely changed the look of my chevy caprice, I know it’s advertised for Hondas but if you cut about a inch it fits right in the top brow and it’s plug and play, very well worth the money!!
Trustpilot
Hace 1 mes
Hace 2 semanas