Deep Pour Epoxy Resin 1.5 Gallon, 2 to 4 Inch Depth Clear Epoxy Resin Kit with Mixer, Bubble Free, Low Odor 2:1 Casting Resin for Table Top, Countertop, River Table, Wood Filler, Bar Top

This epoxy worked great very low bubbles smooth and Harden quickly you will enjoy it.

Takes a while to dry but when it does it's crystal clear.

I used this product to provide a seal as well as a smooth surface on a fabric covered table artwork. It was my first time using resin and I made sure I read everything and gathered all the supplies I needed before I got started. It was a little confusing where I read to stir by hand clockwise yet a mixing element for use in a drill was included with the kit. I didn't use it as I wanted to keep the bubbles to a minimum. I poured it into the top of the table and then used a heat gun on low to get rid of the bubbles. I also "painted" some of the resin into the rest of the table to seal the fabric. I spent the next couple of hours monitoring and using the heat gun to pop bubbles. Be sure to look at item you are applying resin to from multiple angles to search for bubbles. In the end I only ended up with one or two tiniest of bubbles you can't see unless you are looking for them. I am happy with the way this turned out and am looking forward to my next resin project!

Worked for deep pour

I am a hobby resin crafter, and this was my first time with using deep pour and thicker molds. I was using this for my wedding flowers so the stakes were relatively high. This resin was perfect for what I was doing. If anyone is also trying to preserve flowers, here were my findings: There were no actual instructions on mixing besides the ratio, but I followed regular resin instructions. I stirred for about 5 min when mixing (sometimes a bit longer if there were still swirls) and poured into a new cup before actually pouring into the mold. I did 4 layers (about 1/2 inch thick each). The resin didn’t get hot in the cup like other resins I have worked with so I imagine I actually could have poured deeper without damaging the flowers, but better to be safe. I waited 8 hours between layers (this was in winter). I found that the 4-6 hours they recommended was too early and the previous layer was still not set. However more than 8 and I ended up with a small line on the final product (which isn’t the worst, but I tried to avoid). I found that this resin had fewer bubbles than others I had used. On the top layer there always were lots of little bubbles, but a heat gun got rid of most of them and over time they went away. Highly recommend this for dried flower projects!

I bought this trying to save a little money, my mistake. My pour was only 3/4" thick and I still ended up with bubbles. I should have used Liquid Glass deep pour, which I have used many times. Again I tried to save a few bucks, now I have to redo both pours...Update:Shabebe contacted me after my less than stellar review and refunded my purchase. The were super helpful and knowledgeable. We reviewed my specific situation and conditions and even sent me a new set of epoxy. Part of the problem was I was pouring too thick in one pour. Anyway I will update again after the second try with this product, but I will say the customer service has been fantastic!

What a nightmare this product never dries. Watched videos and went exactly according to directions. Doubled check measurements and every. Totally ruined the counter top. We have to build another one. Not only is costing me the cost for the product but all new 2ord and hours to construct it all over again. So upset.

good epoxy , so far so good , easy to work with