Sobre nosotros

Servicios al cliente

Atención al cliente

Acceso Regional

Legales y políticas

Social

Obtén la aplicación

Apunta tu cámara para descargar la aplicación

Customer support

We're available 24/7 to help you!

Adafruit 259, USB Li-Ion/LiPoly Charger, v1.2

Q: What do i solder to adjust from 500 to 1000 mAh?

The max charge rate of the USB charger is about 1000 mA. To achieve this charge rate, you can either solder a 2.0K resistor on top of R4 (default 2K) - this will make the total parallel resistance 1.0K or you can remove R4 by desoldering it or cutting the trace to it and solder a 1.0K resistor in its place. The max charge rate of the USB/DC charger is about 1200 mA. To achieve this charge rate, you should solder a wire (short) on top of RPROG (default 4.7K). You can also change the rate to a different value by either soldering a resistor on top of RPROG (and calculating the parallel resistance) or removing the resistor and soldering a different one in its place. See the schematic for what values result in what charge rates. Important Note! Never charge a battery faster than 1C (so a 1300mAh battery should be charged at under 1300 mA) and we suggest staying at or below 0.5C Check the datasheet of the battery for more information about your cell https://learn.adafruit.com/li-ion-and-lipoly-batteries/proper-charging

Q: On the board there are solder points for a dc in, does this mean i can connect another method of charging to the board such as qi charging?

Yes, one would use the USB port for the charger to plug in, the port labled 'BATT' would connect to the battery needing charging and the port labled 'LOAD' connects to the device needing to be powered.

Q: What is the STR 2-1 input for?

Did you mean STAT 2 1 ? These stands for the two Charge Status outputs.

Q: Will this work with a 3.7volt 2000mAh 7.4Wh Li-ion battery?

Yes it will definitely work. I've used this with an Adafruit 1500mAh, 2000mAh, and 2500mAh single cell Li-ion battery with no problems. It takes a long time to charge but that's to be expected. Yellow LED indicates charging, Green LED indicates your battery is fully conditioned and charged properly. Use this with multi-cell 18650's at your own risk, it's not recommended because there is no balance charge circuit for multiple cells. It's specifically designed for Adafruit's single cell Li-ion batteries.

4.6/5

ID del producto: 346050027

Transacción segura

Comprados juntos con frecuencia

Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2

EEMB Lithium Polymer Battery 3.7V 1100mAh 603449 Lipo Rechargeable Battery with Wire JST 2.0mm Connector for Speaker and Wireless Device- Confirm Device & Connector Polarity Before Purchase

Adafruit Lipo 4410 Micro Charger for LiPoly Batt with USB Type C Plug

Descripción

Adafruit 259, USB Li-Ion/LiPoly Charger, v1.2

¿Tienes una pregunta? Mira lo que otros preguntaron

What do i solder to adjust from 500 to 1000 mAh?

On the board there are solder points for a dc in, does this mean i can connect another method of charging to the board such as qi charging?

What is the STR 2-1 input for?

Will this work with a 3.7volt 2000mAh 7.4Wh Li-ion battery?

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Pooja R.

El servicio al cliente superó mis expectativas. Perfecto para comprar productos que no encuentras en otro lado.

Hace 1 semana

1. Suresh K.

Me impresionó mucho la calidad y la entrega rápida. Volveré a comprar aquí.

Hace 4 días

Ver todas las reseñas de confianza

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.

Compre globalmente

Sirviendo a más de 300 millones de compradores en más de 200 países

Protección mejorada

Opciones de pago confiables que adoran los compradores de todo el mundo

Garantía del cliente

Opciones de pago confiables amadas por los compradores de todo el mundo.

Aplicación DesertCart

Compre sobre la marcha, en cualquier momento y en cualquier lugar.

AR$126770

Derechos e impuestos incl.

Argentinaalmacenar

Devoluciones gratuitas

30 diaspara usuarios de membresía PRO

15 diassin membresía

Transacción segura

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Rajesh P.

El servicio al cliente fue excelente cuando tuve preguntas sobre el producto.

Hace 2 días

Zainab N.

Fantástico y excelente servicio. El envío fue más rápido de lo esperado.

Hace 1 semana

Ver todas las reseñas de confianza