Classic Accessories QuadGear UTV Front/Rear Windshield, Fits Yamaha Rhino, Black

Got the wind and the rain both off me was well built

Fit my 2015 Massimo MSU500 perfectly. My only complaint was the window sagged in the middle, but I knew that from the other reviews hear. Initially I planned to put a grommet in the top of the window frame and secure it to the roll cage with a zip tie, but I had one of those foam pool noodles which I shoved between the window frame and the gap in the hard roof of the Massimo. It took a little effort to shove the noodle into place, but the result was great. The noodle fit tightly when compressed between the roof and the roll bar and holds the window very tightly and stretches the window for a perfect fit. The widow holds firmly in place even at full speed with windy conditions. The noodle fills the open gap at the top which cuts the drafts coming in from behind.. if you decide to open the window, you can just remove the lower straps and roll the window around the noodle and tie it up to the roll bar with velcro straps. Now if these guys would just make side curtains for the Massimo it would be perfect. This window is well made and a bargain at this price.

I gave this a 4 star because they didn't make securing the peice all over. It does have 6 velcro straps along the sides but nothing along the top ROP (bar) or the bottom. I don't have a roof, but the bottom just flops free as well, so splashing thru the mud & water will allow mud & water to makes it's way into the back seat area. So I already had DOT Snaps ( like what you have on little straps, motorcycle vest etc.. even western shirts are a Dot Snap). So I drilled 5 snaps along the top ROP bar, and 2 down below and 2 inbetween the velcro straps along the sides, WOW what a difference. Note: You can buy Snap hardwear that fits a standard set of vise grips to install these, and buy then and the snaps usually at a well stocked craft or fabric store even on line. Do a couple of test first, make a small hole in the material for the stem of the top snap, put the male dot on the oppisite side over the stem you just stuck thru the material and with the vise grip system crush it together untill you can see the stem of the male snap rolled evenly in the male dot snap, then mark it to your frame, pre-drill the hole use stainless steel counter sunk head screws. Doing the snaps allows the window portion to be adjust really tight and smooth for better visability. I installed this on my 2013 Polaris Ranger Crew 800 six seater / full size). Note on the Polaris adjust the peice (if your using the factory soft/screen doors) so the straps arent trying to share the same spot as the straps for the soft /screen doors on the ROP bar. Hope this helps !

I kept looking at these rear windows from Classic Accessories because they seemed like a good deal, unfortunately they don't list one for my UTV which is a 2017 CFMoto Uforce 800. Finally I decided to do a little research and see if one of them would come close to working for me. I ended up calling Classic Accessories and they were pretty helpful, but their model numbers were pretty confusing. I ended up ordering Model #78637 with the measurements of 52" x 35" and I couldn't be happier with how it fit! Like others have pointed out, the top edge doesn't have any straps and drooped, so I picked up a grommet installation kit from Harbor Freight for $3.99 and installed grommets every 6 inches and used zip ties to fasten to the roll bar. Everything worked out very well! The quality for the price is excellent! I will say that having the rear window on warm days seems a little too warm. For me that is OK because I mostly wanted something for the winter when I am plowing snow.

Easy install. Should have some straps so you can just roll it up to open it for towing, etc. Otherwise, should work just fine.

I bought this back in 2014 and I'm preparing my Rhino for winter plowing duty this month with new paint, new plow, tune-up and new track treads. This rear window is still on there- five years now and it's still good. The plastic window needs to be cleaned and treated to make it more clear again, but that is typical for soft windows on any UTV or convertible car and there are products to help with that. The roof panel I got has started to rot and needs to be replaced this year, but the rear window is STILL going. Very happy with this purchase!

Classic Accessories 78657 QuadGear UTV Rear Window For Polaris Ranger, Black. The product looked ok when I took it out of the box, then everything was downhill from there. It did not fit as described, velcro straps are not long enough or positioned to be able to close. I wrote the company and received no response to fix the problem. I tried calling them at least 3 times and left messages stating that if they would send me a fix for the strap attachment I would keep it , worthless. You never get an answer and never the opportunity to speak with someone. This is the worst service I have gotten from Amazon or it's vendors! When I did try to return the product via Amazon it just referred me back to the seller. So I'm SOL according to the vendor, it's been 30 days. Catch 22

Could be a liitle bit bigger to cover the whole cage but it close and needs more tie downs to keep it all tight probably have to put some screws in couple places to keep it from flapping around. But it is way better then a open area behind ur head