Replacement Cooler Faucet 2 White and 2 Blue Water Dispenser Tap Set. BPA Free Plastic Spigot..

This review is for the Qboyi Replacement cooler Faucet 2 White and 2 Blue Water Dispenser Tap Set. BPA Free Plastic Spigot. I have an older Brita UltraMax and similar to other reviews, my original spigot had finally completely failed and would no longer allow water to flow when the spigot leaver was moved. I really didn't want to purchase a replacement, so I decided to try fixing mine first. I'm glad I did!Installation is easy, just back off the plastic nut inside the container to allow removal of the old spigot. Then insert this replacement and reinstall with the included washer and nut. Don't over tighten - I did mine to hand tight then used a clean adjustable wrench to go a little more (less than 1/4 turn more).These spigots fit my older Brita UltraMax perfectly and are ALMOST an exact replacement. If you use the usual 'push and hold down' action on the spigot leaver you'll never notice any difference. However, if you like flipping the spigot leaver the opposite direction so that it locks open - you'll find you have to orient the leaver either left or right in order to be able to lift it far enough to lock open. I think this is primarily due to the angle the replacement leaver has vs the OEM. This spigot is just few mm shorter from the exterior nut forward when compared to the OEM, and yet overall it is also a little longer (see pics) as it intrudes farther into the water container than the OEM spigot. Still fits, it's just longer. The replacement spigots included new washers as well.I'm only on day 4 in the frig, but no leaks, no issues and it's great to have water flowing at full velocity again!

Bought this to replace the spigot on my Brita UltraMax Dispenser ("slim" design). The original spigot has begun to slowly leak water at year ~4 and I was unable to permanently fix it or get a replacement from Brita. Scoured Amazon to find 3rd-party replacements that's relatively cheap and had proven reviews.This one fit the bill. Purchased for ~US$6.65 and received 4 as advertised. The length of the neck is a bit longer than the original but was not a huge issue. The diameter I think was slightly smaller than the original but did not affect its function. Plenty of silicone washers so you could add them inside/outside to prevent leaks from both sides. Assembling it is the same as the original. Once cleaned and attached, it functioned perfectly.

I bought these faucets for installation on an old plastic ice cooler and on a liquid laundry detergent dispenser, as described below. Installation is eazy. Once you have the properly sized hole, insert the main body with the threaded pipe through the hole, and secure it using the included nut and washers. You might want to take the additional step of using a hacksaw or other implement to remove any excess threaded pipe, which might become a nuisance.I bought a large jug of laundry detergent with a push-button faucet on the side. The detergent was so-so but I liked the convenient faucet. The problem with that push-button faucet was that it was very stiff and took a while for an adequate amount of the normally thick liquid detergent to be dispensed. That was a minor issue in the larger scheme, but one of these faucets relieved me of the anxiety of having to hold that stiff faucet button down every time I loaded the washing machine. :-)The old faucet was mounted on a screw lid, which made replacing it a breeze. I now refill the jug with a detergent of my choice and only need to flip the faucet handle and wait for the desired amount of detergent to be dispensed. The replacement faucet takes about the same amount of time to dispense, but it's no longer necessary to hold down that very stiff push-button. (This is a reminder to stop and smell the roses from time to time, and appreciate the little things.)These simple flip-handle faucets worked for my applications, and I'm confident they would work well on your ice coolers and for other purposes. I recommend them without reservation.Note: I suggest you do a little bit of homework before your purchase. Make sure the faucet will fit the final install location and that you have the tools and access to make the install.

The media could not be loaded. Our Brita’s spigot internal rubber has failed. It won’t fully open or open at all. I opened it up to see what is causing it, the rubber inside failed. Searched in google, saw link to Amazon for a direct replacement, but Brita only sells replacement of filters, not parts. Saw this one, 4 spigots x2 white, x2 blue. For under $10. I was hesitant at first but, I have been an amazon customer to know that I can always return it. 😂 things to know;1. This Spigot is a little smaller in diameter, when you put it inside the hole, it is very loose. The Brita is a prefect size for the hole.2. Thankfully, this is where the rubber Seal comes in. I hand-tightened the spigot in place with the rubber seal. Tested for leak, nothing.3. The brita’s spigot handle is longer and it is made so that you can open it in ANY angle. This one, you can either leave it open side ways and the handle facing away from the surface of the container. (See attached photo and video.)Summary: 4 stars because You need to be mindful how you leave the handle close, other than that, it’s a cheap replacement, plus 3 spigot extra on hand for under $10.

The media could not be loaded. I have 2 containers for flavored water and both were damaged, so I bought these spare parts and the truth is that they work well, except that these are larger than the entrance, so I had to make larger holes in my container, I had to use a drill to be able to make them fit, so if you are going to buy them make sure they fit, if not, you will have to make the hole larger or buy some that fit to size.( 5/8)

Exactly what I was looking for (for days and days... online and locally). Good details in description including precise item measurements. All the 'parts' needed were included in order including 2 gaskets for each spigot. Arrived super fast in perfect condition.