🔌 Power Up Your Adventure with Style!
The Auxbeam8 Gang Switch Panel BA80 is a state-of-the-art electronic relay system designed for versatile applications in vehicles like trucks, ATVs, and boats. With an automatic dimmable feature, robust safety protections, and easy installation, this switch panel ensures a seamless user experience while maintaining high performance and reliability.
Operation Mode | Automatic |
Current Rating | 60 Amps |
Operating Voltage | 12 Volts |
Contact Type | Normally Closed |
Connector Type | Quick Connect |
Brand | Auxbeam |
Terminal | Physical, Quick Connect, Normally Closed |
Item dimensions L x W x H | 11.81 x 7.87 x 3.15 inches |
Circuit Type | 8-way |
Mounting Type | Panel Mount |
Actuator Type | Touch |
Contact Material | Aluminum |
International Protection Rating | IP65 |
Number of Positions | 2 |
Upper Temperature Rating | 105 Degrees Celsius |
Control Method | Touch |
Connectivity Protocol | X-10 |
Color | Blue (Without APP) |
Wattage | 1.2E+3 |
Unit Count | 1 Count |
Number of Items | 1 |
Manufacturer | Auxbeam |
Item Weight | 4.62 pounds |
Product Dimensions | 11.81 x 7.87 x 3.15 inches |
Country of Origin | China |
Item model number | IFNSX-094 |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | QP002559 |
Bulb Type | led |
Voltage | 12 Volts |
M**F
Works well for intended purpose.
Easy install, works great. Using for various lights on a Jeep JK. Easy mounting location inside Jeep for controller and looks pretty decent.
T**D
Nice Product
Good product, easy to install , it really cleans up the wiring under the hood. My only complaint is the wiring harness was a bit short, I opted to buy the 20 foot harness and and shortened to the size I needed. Overall it’s a good product.
J**S
Great product
Awesome product. Great quality and easy installation. Instructions are good as well
W**L
Works awesome.
Used it on my 2021 Tacoma. Made hooking up off road lights a lot easier.
R**I
Awesome switch box/relay board
Works great, amazing product, lots of mounting solutions included in box. Wiring it up is really no harder than wiring up a relay. I used this to power my 9” Scandinavian driving lights.
C**E
Nice Alternative to Higher End Switching Panels
This is the new version with auto dimming/brightness. Previous versions had a white wire that you had to provide power to and pulse for changing the brightness. Glad they redesigned that. I wish it had a ‘light’ wire though so it’s not staying lit whole time car is on. It would be nice not to be backlit until vehicle lights were on. Guessing it was a design choice to keep limited wire runs. This version has a memory. If car is on and you have things active. You can press middle button and it turns everything off at once. Press again and it turns on everything that was on. When you turn car off and back on everything defaults to off. So if you have fans or coolers you need to remember to turn them back on. I have ran it for a couple of hours and it does not produce any heat. Very simple setup with very few wires or connections. I used the provided bracket (which is hidden under all of the foam) and hid the whole switching unit under some panelsA few things I don’t like about this whole system.1.The circuit breaker cover is too snug. If you push it all the way down it resets it, be sure to just set it on top but not push down all the way. Glad I tested it all out before putting cover on, otherwise that would have been confusing.2. It’s not customizable. You get 2 each 5a, 10a, 20a and 30a fuses. What if you don’t need all those higher amperage ones. And you can’t move them around, you’re stuck using the switch in the order they set.3. Short power wire from battery to circuit breaker4. You can’t really add a fridge to it even though there’s a fridge label. Reason is, this panel only works with ACC so your car needs to be on. Not good for a fridge to always have your car running. I suppose you can have fridge wired in then when get to camp site move to other power source.5. The power and ground cable ring are small. Will fit over 10mm bolt but not 12mm. I ended up widening the ring to fit on my battery terminal.6. Not sure if it will support air compressor. My compressor has already an inline 20a fuse so my assumption is it will work but have not tried yet.7. The brackets that come to mount the switch are good and bad. It has a couple of options / ways but it will most likely require altering your car.Overall though, nice alternative to the higher priced switching panels. it comes with high quality parts. Not all plastic. Easy to install. Looks good. Easy to use. If you have 2 or more accessories it’s worth it for a clean nice look with fewer wires and switches every where.
N**R
Amazing quality and easy install!
When I opened the box I was immediately impressed. All components were in foam and very well protected. Setup was super easy. Love that the kit comes with two add a fuses depending on what size fuses your vehicle uses. Also love the fuse/circuit breaker coming off the battery. Love that each circuit is fused as well. Running the wire for the controller into the cab of my truck was super easy. Wired in a few lights as well as a small power inverter for charging power tool batteries. Thanks Auxbeam for making a super high quality product at a low price! Will continue to check y'all out with all my automotive lighting needs!
D**R
Awesome product
This is my second time buying one of these. Great quality.
Trustpilot
1 month ago
1 week ago