--- product_id: 65213895 title: "HELLA H4P50TB +50 Performance Bulb, 12V, 60/55W, 2 Count (Pack of 1)" brand: "hella" price: "AR$47697" currency: ARS in_stock: true reviews_count: 13 category: "Hella" url: https://www.desertcart.com.ar/products/65213895-hella-h4p50tb-50-performance-bulb-12v-60-55w-2-count store_origin: AR region: Argentina --- # 50% more light output OE quality & perfect fit ECE R37 & INMETRO certified HELLA H4P50TB +50 Performance Bulb, 12V, 60/55W, 2 Count (Pack of 1) **Brand:** hella **Price:** AR$47697 **Availability:** ✅ In Stock ## Summary > 💡 Light up your drive with HELLA’s +50 Performance – because safety never goes out of style. ## Quick Answers - **What is this?** HELLA H4P50TB +50 Performance Bulb, 12V, 60/55W, 2 Count (Pack of 1) by hella - **How much does it cost?** AR$47697 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.com.ar](https://www.desertcart.com.ar/products/65213895-hella-h4p50tb-50-performance-bulb-12v-60-55w-2-count) ## Best For - hella enthusiasts ## Why This Product - Trusted hella brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Key Features - • **Trusted Legacy:** Backed by HELLA’s 100+ years of automotive lighting innovation and reliability. - • **Pair for Perfection:** Recommended to replace bulbs in pairs for balanced, symmetric lighting on the road. - • **Invisible Yet Powerful:** Silver top coating and optimized filament design deliver a sleek look with superior brightness. - • **Precision Engineered Fit:** Original equipment quality ensures seamless installation and optimal performance. - • **Illuminate with Confidence:** Up to 50% brighter light for enhanced night driving safety and comfort. ## Overview The HELLA H4P50TB +50 Performance Bulb is a 12V, 60/55W automotive headlight bulb delivering up to 50% more light than standard bulbs. Engineered with original equipment quality, it features an optimized filament and silver top coating for a brighter, wider beam while maintaining a sleek, nearly invisible appearance. Certified to meet global standards (ECE R37 and INMETRO), these bulbs ensure enhanced road safety and comfort. Sold in twin blister packs, HELLA recommends replacing bulbs in pairs to maintain symmetric lighting performance. ## Description HELLA develops and manufactures bulbs for the automotive industry an also has one of the largest retail organizations for automotive parts. With more that 7,000 people working in research and development, HELLA is one of the most important innovation drivers in the market. Review: 4 stars because price to value is worth buying. - These bulbs were under 4$ ive bought a lot of 50$ sets of bulbs so let's agree to not compare apples to orange. Stick to the 4$ here. I installed these on a 2006 prius after one burned out last summer. They are good lights brightness is good, color is like stock, life just a little over a year and one of them burned out. Again 4$ so of coarse i ordered 2 more sets and just put them in the glove box. Usually i replace both at once. But for the sake of seeing how long the other one lasts i only replaced the burnt out one this time. We are at about 15 months now so working. Are your bulbs easy to change? Yes, Order 2 sets. Keep them in your glove box and save some money. Review: Very good so far - Very good bulbs. Seems much brighter and looks more white than the standard bulbs. Only time will tell if they will last. Shipping wasn't fast but not terribly slow ## Features - Up to 50% more light output than standard bulbs which provides you the best lighting performance, giving performance-oriented drivers additional safety time and comfort on the road. - Original equipment quality bulbs you can trust from a global leader in automotive lighting technologies for more than 100 years - HELLA bulbs guarantee best functionality, optimum fit and long lasting customer satisfaction - All bulbs are produced under HELLA's stringent testing requirements, you know this is a brand that can be trusted. Performance +50 bulbs have a wider and brighter light, filament design has been optimized and silver top coating so that the bulb is nearly invisible in the headlight. - HELLA recommends that you always replace in pairs to ensure symmetric light beam from both bulbs on the road as head lights will dim over time - Meets global standard (ECE R37 and INMETRO regulation) - Please check your local regulations - 2 Bulbs - Twin Blister Packaging ## Technical Specifications | Specification | Value | |---------------|-------| | ASIN | B078SKFMVL | | Auto Part Position | Front | | Best Sellers Rank | #115,138 in Automotive ( See Top 100 in Automotive ) #634 in Automotive Headlight Bulbs | | Brand | Hella | | Color | silver | | Customer Reviews | 4.6 4.6 out of 5 stars (2,329) | | Date First Available | January 4, 2018 | | Global Trade Identification Number | 07502278672192 | | Item Package Quantity | 1 | | Item Weight | 1.76 ounces | | Item model number | H4P50TB | | Manufacturer | HELLA | | Manufacturer Part Number | H4P50TB | | Mirror Lighting Type | automotive-exterior-headlight-bulbs | | Model | HELLA | | Product Dimensions | 4.72 x 2.36 x 5.91 inches | | Specific Uses For Product | Fleet and plant maintenance. | | Voltage | 12 Volts | ## Product Details - **Brand:** Hella - **Color:** silver - **Item Package Quantity:** 1 - **Specific Uses For Product:** Fleet and plant maintenance. - **Wattage:** 55 watts ## Images ![HELLA H4P50TB +50 Performance Bulb, 12V, 60/55W, 2 Count (Pack of 1) - Image 1](https://m.media-amazon.com/images/I/91kQLNs7VaL.jpg) ## Questions & Answers **Q: Has anyone tried this bulb on an BMW G650GS? I am a bit concerned it might fry the wires, reflector or lens.** A: You MUST use 12g stranded wire with quality insulation to each h4 socket terminal. You MUST use Ceramic High Heat HD socket. You Must usea relay that is 20% Higher rated than the max amp draw. Your altenator or generator must have the added capacity so to cover the increased draw@ idle of these lamps or they will draw down the battery. If smaller wire or alt capacity there will be voltage drop which increases amp and thus heat. For 1 light on a bike figure for 13.5v to be safe which adds to 9.6 amps. Use a 15 amp relay. For high low you need 2 relays use two 15a or 1 15a hi and 1 10a lo. If its 2 for a dual lamp or 4wheel vehicle double Watt so 260w÷13.5=17a. Best use 25 or 30a relay for high and low. Ideally use a dual output relay so 1 12g lead to each bulb from relay term not daisy chained. Ideally run 10g from battery or alt post to relay input. Built like this you will never have a capacity or heat issue when in good condition. YOU CAN NOT USE ANY STOCK WIRING HARNESS!! NOT EVEN MOST PREBUILT HD WIRING HARNESS. If you follow the above general guide with properly crimped connectors it will not only not burn up but 2 Will have much higher light output. Remember a 5% drop in voltage = a 15% drop in light output 1:3 ratio. Ideal voltage is 14.5V on 12v systems. **Q: I have an original stock headlight. Anything special i need to do to use this bulb?** A: The current draw with this bulb is more than stock so after having the lights on for say a 30 minute drive in warm weather see if the connector at the bulb is hot as well as the wires going to it with the lights still on if so you should install a hevi-duty connector and wire kit. My jeep 2005 wrangler handled these bulbs just fine and I think most vehicles will need nothing.....DBW **Q: I have a 1998 Kawasaki Vulcan 800 Classic. Any need to upgrade anything electrical or does this simply replace the stock bulb? Thanks** A: Oh yeah. You should not just plug this in and go. These bulbs make a ton more heat than a stock 55/60 bulb. Buy a ceramic plug as well, otherwise the stock pug will just melt over time. I think I paid maybe 12 bucks for 2 ceramic H4 plugs on Amazon. **Q: Will these work on my motorcycle? it's a 2004 bmw r1150r, and h4 is stamped on the glass plate of the light housing** A: The h4 bulb will fit, May want to check the wattage they get kind of hot. There is a lower watt bulb too I believe. ## Customer Reviews ### ⭐⭐⭐⭐⭐ 4 stars because price to value is worth buying. *by C***E on November 20, 2023* These bulbs were under 4$ ive bought a lot of 50$ sets of bulbs so let's agree to not compare apples to orange. Stick to the 4$ here. I installed these on a 2006 prius after one burned out last summer. They are good lights brightness is good, color is like stock, life just a little over a year and one of them burned out. Again 4$ so of coarse i ordered 2 more sets and just put them in the glove box. Usually i replace both at once. But for the sake of seeing how long the other one lasts i only replaced the burnt out one this time. We are at about 15 months now so working. Are your bulbs easy to change? Yes, Order 2 sets. Keep them in your glove box and save some money. ### ⭐⭐⭐⭐⭐ Very good so far *by P***P on October 26, 2025* Very good bulbs. Seems much brighter and looks more white than the standard bulbs. Only time will tell if they will last. Shipping wasn't fast but not terribly slow ### ⭐⭐⭐⭐⭐ Works fine on a 2005 Toyota Tacoma *by C***Y on June 25, 2020* Instructions for the 2005 Tacoma (20-30 min job). Having a flashlight may help depending on lighting conditions. Materials needed: paper towels, contactor spray, disposable gloves, new bulbs, and long narrow screwdriver and 10mm socket/ratchet are optional. Perform driver's side first since there is better access and knowing the procedure will help on the passenger side. Alternatively, remove the windshield washer fluid reservoir (two 10mm bolts) on the passenger side to provide unobstructed access to the passenger side bulb: 1. Remove the bulb connector by pulling straight back (no clips here) and set aside out of the way. In my case, the connectors were greasy. So, either wear disposable gloves or clean them first. 2. Remove the round black weather boot by pulling on the tabs. A screwdriver may help, just be careful not to pierce the rubber. 3. There is a bulb retaining clip (similar to a paperclip) that is hinged on one side and hooked on the other. Simply press on the hooked side and lift using a single finger and the retainer will swing open like a door. Observe orientation of the old bulb before removing and then pull it straight out. 4. Install the new bulb, reattach the retaining clip making sure it hooks completely (a narrow screwdriver may be required). 5. Reinstall the weather boot making sure it seats all the way around to avoid moisture entering the headlight. 6. If you have electrical contact spray, spray that onto the connector contacts (in my case, corrosion was apparent) before reonnecting to the bulb. 7. Repeat process on other side and then test hi and lo beam functions and you should be all set. Dealerships charge about $120 per bulb change. So, treat yourself to a beer with the savings🙂 ## Frequently Bought Together - HELLA H4P50TB +50 Performance Bulb, 12V, 60/55W, 2 Count (Pack of 1) - CERAKOTE® Ceramic Headlight Restoration Kit – Guaranteed To Last As Long As You Own Your Vehicle – Brings Headlights Back to Like New Condition - No Power Tools Required - 10 Wipe Kit - HELLA H11P50TB Twin Blister +50 Performance Bulb, 12V, 55W, 2 Count (Pack of 1) --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.com.ar/products/65213895-hella-h4p50tb-50-performance-bulb-12v-60-55w-2-count](https://www.desertcart.com.ar/products/65213895-hella-h4p50tb-50-performance-bulb-12v-60-55w-2-count) --- *Product available on Desertcart Argentina* *Store origin: AR* *Last updated: 2026-05-22*