---
product_id: 63729436
title: "200pcs 10 Colors x 20pcs 5mm LED Light Emitting Diode Assorted Kit 29mm Lead Clear Round Lamp White Red Blue Green Yellow UV Bright LEDs Bulb +300pcs Resistors for DC 6-12V Lights"
brand: "edgelec"
price: "AR$37730"
currency: ARS
in_stock: true
reviews_count: 8
url: https://www.desertcart.com.ar/products/63729436-200pcs-10-colors-x-20pcs-5mm-led-light-emitting-diode
store_origin: AR
region: Argentina
---

# Ultra low 0.06W power 10 vivid colors included 200pcs vibrant LEDs 200pcs 10 Colors x 20pcs 5mm LED Light Emitting Diode Assorted Kit 29mm Lead Clear Round Lamp White Red Blue Green Yellow UV Bright LEDs Bulb +300pcs Resistors for DC 6-12V Lights

**Brand:** edgelec
**Price:** AR$37730
**Availability:** ✅ In Stock

## Summary

> 💡 Light up your projects with pro-grade brilliance and color!

## Quick Answers

- **What is this?** 200pcs 10 Colors x 20pcs 5mm LED Light Emitting Diode Assorted Kit 29mm Lead Clear Round Lamp White Red Blue Green Yellow UV Bright LEDs Bulb +300pcs Resistors for DC 6-12V Lights by edgelec
- **How much does it cost?** AR$37730 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.com.ar](https://www.desertcart.com.ar/products/63729436-200pcs-10-colors-x-20pcs-5mm-led-light-emitting-diode)

## Best For

- edgelec enthusiasts

## Why This Product

- Trusted edgelec brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Pro-Ready Design:** 29mm long leads and industrial standard size for seamless integration
- • **Energy-Smart Glow:** Consumes just 0.06W per LED—bright without the bill shock
- • **Brilliant Spectrum:** 10 colors x 20pcs each for endless creative lighting
- • **Fast & Safe Soldering:** Manual soldering under 3 seconds at 482°F-527°F for efficient builds
- • **Precision Engineering:** ±1% resistor tolerance ensures consistent, reliable performance

## Overview

This EDGELEC 200-piece LED kit features 10 vibrant colors with 20 LEDs each, all 5mm round clear lenses with 29mm leads. Designed for DC 6-12V circuits, each LED consumes a mere 0.06 watts and offers a 30° beam angle. Included are 300 precision metal film resistors (±1% tolerance) optimized for stable, energy-efficient lighting. Ideal for hobbyists and professionals seeking reliable, colorful illumination with fast soldering capabilities.

## Description

* Low Energy Consumption And Low Heat. * Industrial Standard Size,29mm Long Lead for widely used and convenient for cperation.* Soldering Condition (Manual Soldering):Less Than 3 Seconds With 482°F-527°F* Soldering Condition (Reflow Soldering):Less Than 5 Seconds With 500°F* Storage Conditions: Drying Preservation And Keep Away From Fire Or High Temperature. * Get other LED models? Please search "EDGELEC Diodes".

## Features

- Product Overview: 200 pcs LED Diodes + 300 pcs Resistors
- Product Features: For Each Color ) / 5mm Round Clear Lens / 29mm Long Lead
- Product Parameters: Red,Yellow,Orange,Yellow-Green: DC 2.0V; Other Colors: DC 3.0V (IF=20mA) / 0.06 Watts / 2pin / DIP LEDs
- Product Parameters: Luminance Brighter Up To +20% / 30° Viewing Angle / Single LED Diodes Wight: 0.29g
- Accessories: 200pcs 430ohm + 100pcs 470ohm (For DC 6-12V) 1/4 Watt Metal Film Resistors Included / ±1% Tolerance

## Technical Specifications

| Specification | Value |
|---------------|-------|
| Brand | EDGELEC |
| Light Type | LED |
| Bulb Shape Size | BT37 |
| Incandescent Equivalent Wattage | 0.6 Watts |
| Specific Uses For Product | General purpose |
| Light Color | Red, White |
| Voltage | 12 Volts |
| Unit Count | 200 Count |
| Number of Items | 20 |
| Shape | 5mm Round Top |
| Material | Polycarbonate (PC) |
| Beam Angle | 30 Degrees |
| Power Consumption | 0.06 Watts |
| Item Package Quantity | 200 |
| Light Source Type | LED |
| Item Weight | 290 Milligrams |
| Light Source Wattage | 0.06 Watts |
| Product Dimensions | 0.2"W x 1.4"H |
| Bulb Diameter | 0.2 Inches |
| Control Method | Touch |
| Style | [B] 5mm Constant Light |
| Manufacturer | EDGELEC |
| Color | [02] 10 Colors X 20 Pcs / 200pcs |
| UPC | 611355168453 |
| Part Number | ED_TC_YT05_10S |
| Item model number | 13 |
| Is Discontinued By Manufacturer | No |
| Finish types | Metal |
| Included Components | Resistors Include |
| Batteries Included? | No |
| Batteries Required? | No |
| Wattage | 0.06 Watts |

## Product Details

- **Brand:** EDGELEC
- **Light Type:** LED
- **Bulb Shape Size:** BT37
- **Incandescent Equivalent Wattage:** 0.6 Watts
- **Specific Uses For Product:** General purpose

## Images

![200pcs 10 Colors x 20pcs 5mm LED Light Emitting Diode Assorted Kit 29mm Lead Clear Round Lamp White Red Blue Green Yellow UV Bright LEDs Bulb +300pcs Resistors for DC 6-12V Lights - Image 1](https://m.media-amazon.com/images/I/618CMGu07OL.jpg)

## Available Options

This product comes in different **Color, Style** options.

## Questions & Answers

**Q: if i'm to connect these leds to 12 to 13.5 volts should i connect 4 leds in series or just get a resistor for each? what value should the resistor be?**
A: Three ways to go.  Four Led's in series, Ohms law tells me that with 13.3 volts applied you can put a 500 Ohm resistor in series with it or you can put a resistance sub box in the circuit (start on a high setting) and dial it back until a current meter reads 20 ma.  ( I always thought 30 ma but I don have the spec sheet).  For longevity error on the conservative side.  That's my story and I am sticking to it!

**Q: Is there a data sheet available for these LEDs?**
A: Sorry for replying you now. Forward Voltage : 3.0V-3.2V ; Forward Current: 20mA.

**Q: Can I wire 4 3v leds in series to a 12v battery without a resistor?**
A: Hello, Great question. The short answer is: No, its not a reliable configuration. Why: Keeping it simple. An idealized model of silicon diode requires 0.7v forward bias to begin conduction. After that, it offers no more resistance to current flow. LEDs are not signal diodes, but the principle is the same. It is a smart idea to series a few diodes with a single resistor because it wastes less power.
Here is a picture: https://www.allaboutcircuits.com/technical-articles/understanding-i-v-curves-of-non-linear-devices/.
At full brightness the drop across an LED may be about 2v, and the current should be limited to about 160mA. THE CURRENT THROUGH THE LED is the important parameter. Example calculation for estimating the resistor size would be:
(12v - N×2v)/0.160A
For something I just did, 13mA gave me the brightness I wanted, for 3 LEDs at that current the LEDs (Edgelec) were dropping 2V.
R = (12 - 3×2)/0.013 = 460ohms. The pack of Edgelec LEDs came with 470ohm resistors so I used 1 of those.
Hope this helps, just remember PN junctions are NOT linear devices!

**Q: I bought the red and green common anode and wonder which the 430 and 470 ohm resistors are for.  Which one is for red and which for green?**
A: The resistor included in the product is to make this led work at 12V circuit voltage.
430 ohm for Green
470 ohm for Red

## Customer Reviews

### ⭐⭐⭐⭐⭐ Good LED lights, sturdy and reliable
*by S***L on April 7, 2024*

The media could not be loaded. This is my review of Edgelec’s Flickering LED LightsThe company sells these LED lights in several different colors, and you can get them in solid or flickering modes. You get 100 lights (I counted them), and an equal number of resistors. The resistors allow you to use the lights at different voltages.A sampling of 10 lights, showed that they all performed perfectly. They were tested using a 3v (series) battery pack, so I did not require the use of a resistor.They are perfect for miniature modeling, lighting up a scale railroad landscape, making faux flickering candles, or placing them into a bookshelf diorama.I am using these flicker (yellow) lights to create a realistic flame effect in a small diorama. The wires are sturdy and even though I had to bend the wires, they held together without problemCheck out my included video to see them in action.

### ⭐⭐⭐⭐⭐ Great if you're willing to do a little work
*by S***I on August 15, 2023*

I've got these wired up as a test currently using an old 5v phone charger through the included resistor. Everything is working as expected. The color is great, the flickering is subtle but noticeable - just what I was hoping. This is a solid value for the price. You'd spend easily five times the amount for pre-built, so I'm happy to save some money where I'm able to.My plan is to install these in some homemade halloween candles made from PVC/hot glue and power them via a small transformer and buck converter rather than batteries. The above test gives me the confidence to move forward in the design, but I'll update later once I have more completed in case anyone wants more details.

### ⭐⭐⭐⭐⭐ Great led diodes
*by J***H on July 17, 2025*

I used these led diodes to upgrade the MIL lights on a 1995 GM cluster.The cluster panel already has voltage regulator built-in so I did not need the included resistors.So far so good. Much brighter than the original halogen bulbs.I will update this post if any of the led diodes crap out.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.com.ar/products/63729436-200pcs-10-colors-x-20pcs-5mm-led-light-emitting-diode](https://www.desertcart.com.ar/products/63729436-200pcs-10-colors-x-20pcs-5mm-led-light-emitting-diode)

---

*Product available on Desertcart Argentina*
*Store origin: AR*
*Last updated: 2026-03-03*