---
product_id: 60999232
title: "Innovera 54001 CPU holder - CPU holders (Grey, Plastic)"
brand: "innovera"
price: "AR$230004"
currency: ARS
in_stock: true
reviews_count: 15
url: https://www.desertcart.com.ar/products/60999232-innovera-54001-cpu-holder-cpu-holders-grey-plastic
store_origin: AR
region: Argentina
---

# Innovera 54001 CPU holder - CPU holders (Grey, Plastic)

**Brand:** innovera
**Price:** AR$230004
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** Innovera 54001 CPU holder - CPU holders (Grey, Plastic) by innovera
- **How much does it cost?** AR$230004 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.com.ar](https://www.desertcart.com.ar/products/60999232-innovera-54001-cpu-holder-cpu-holders-grey-plastic)

## Best For

- innovera enthusiasts

## Why This Product

- Trusted innovera brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Nonskid padding holds CPU in place. Durable construction ensures strength and stability. Wheels enable easy mobility. Color: Light Gray; Material: High-Impact Plastic; Caster/Glide/Wheel: Four Swivel Casters (2 Locking); Overall Width: 8 3/4&quot;.

## Features

- Innovera 54001 Product colour: Grey
- Material: Plastic. Width: 222 mm
- Depth: 254 mm
- Height: 127 mm
- ›See more product details

## Images

![Innovera 54001 CPU holder - CPU holders (Grey, Plastic) - Image 1](https://images-na.ssl-images-amazon.com/images/I/61iKhoq6HxL.jpg)
![Innovera 54001 CPU holder - CPU holders (Grey, Plastic) - Image 2](https://images-na.ssl-images-amazon.com/images/I/71NheAcS4IL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐ 







  
  
    Four Stars
  

*by L***. on Reviewed in Canada on 11 March 2016*

what I expected I am satisfied, thank you

### ⭐⭐⭐⭐⭐ 







  
  
    Instructions for those who need it! Product Review after.
  

*by J***M on Reviewed in the United States on 9 July 2014*

Instructions (seem to be what people complain about most) written by me:What should be in the box2x Half of the standShould be in the same bag4x Wheels4x Nuts1x WrenchAnother Bag2x Phillips(+) screws2x Nuts2x Washers4x Anti-slip pads.Required tool that is not included. A P2 phillips head (+) screwdriver.Assembly (You can attach the wheels first or last does not really matter):Attaching the wheels1. I would start by putting the wheels on each half make sure you have the lock wheels on different halves and configuring them diagonally or across from each other (they assembled it across from each other).2. Take the nuts that were included with the wheels and insert them into each of the corners (ideally with the dots hidden/away from you). Try applying some force on the nuts to keep them in the hole while you thread the wheels into them by turning them clockwise.3. Continue to do so until it is threaded and will not come out if you let go of the wheel.4.Now you just take the included wrench and begin turning the nut on the side of the wheels clockwise until you get them to the German torque specs Gudntite (you can continually turn the wrench around to make it faster or just turn it a quarter of the way each time).Now that you have all 4 wheels assembled. Time to put it together.1. I would take your halves and slide them into each other.2. Insert a screw with a washer (ideally you would want the shiny side of the washer facing you and the dull side towards the stand) through the bottom side of the stand.3. Insert the nut into the hole on the opposite side. Thread loosely with a screwdriver (make sure you can still slide it). Repeat for the other side.4. Now slide your stand over the top of your case try to find a spot where the width is the same as where you would like to put it (should not be too hard since most cases are pretty much rectangular cubes).5. Now just tighten the screws to your desired width and repeat for the other side.6. Attach the anti-slip pads to each corner.7. (Optional) - "If you press down on the middle, you will see bowing which will stress the bolt areas. You can reinforce these with, say, clear, strong Scotch packaging tape: Tightly wrap both sections where the two sides overlap, which should visibly reduce bowing." -Taken from whatithink's review8. Just put the stand on the ground and set your tower onto it and you are ready to roll (pun intended).Product Review:For the price you cannot really complain too much. It seems rather flimsy but holds my NZXT H440 just fine after a couple creaks and groans. The main purpose was to raise it off the ground to reduce dust accumulation which was achieved, The lock wheels do not work that well. If you bump it, it will STILL move just slightly less than if the wheels were unlocked (I have hardwood floors and they are set across from each other). I am not having any balance issues with rolling it around.In summary:Pros+Raises my tower to reduced dust accumulation+Holds my tower (for now)+Inexpensive+Makes it easier to access the backCons-Lock wheels do not work too well (on hardwood)-Construction seems flimsy-Had to write instructionsIf you are looking for a cheap way to get your tower off the ground this is it. If you are concerned about the sturdiness of it I would look at something else and pay the extra money if you want peace of mind since the stuff inside is usually a very hefty investment, but it seems fine to me.

### ⭐⭐⭐⭐⭐ 







  
  
    Better Protection And Care For Your Computer.
  

*by R***. on Reviewed in the United States on 15 July 2017*

It does a great job holding my top of the line Hewlett Packard Envy Phoenix desktop computer , I just added more padding in the bottom. It took 5 minutes to put together only 4 screws and 4 wheels my little niece put it together and you dont need instructions they only fit the right way. This is made to be under your desk  keeping  your computer off the floor, nicer looking, easier to keep cleaner , prevent scratching it and  running cooler  with better air circulation. Its made of good plastic so big heavy computer like mines I move with care. I am very satisfied with it specially for the price , beats just leaving on the floor.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.com.ar/products/60999232-innovera-54001-cpu-holder-cpu-holders-grey-plastic](https://www.desertcart.com.ar/products/60999232-innovera-54001-cpu-holder-cpu-holders-grey-plastic)

---

*Product available on Desertcart Argentina*
*Store origin: AR*
*Last updated: 2026-03-01*