---
product_id: 100050963
title: "30 PSI Pressure Transducer, Pressure Sender Pressure Transmitter Sensor for Oil Fuel Gas Air Water, 1/8\"NPT Thread Stainless Steel Pressure Transducer Pressure Sender"
brand: "walfront"
price: "AR$73893"
currency: ARS
in_stock: true
reviews_count: 8
category: "Industrial"
url: https://www.desertcart.com.ar/products/100050963-30-psi-pressure-transducer-pressure-sender-pressure-transmitter-sensor-oil
store_origin: AR
region: Argentina
---

# 30 PSI Pressure Transducer, Pressure Sender Pressure Transmitter Sensor for Oil Fuel Gas Air Water, 1/8"NPT Thread Stainless Steel Pressure Transducer Pressure Sender

**Brand:** walfront
**Price:** AR$73893
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** 30 PSI Pressure Transducer, Pressure Sender Pressure Transmitter Sensor for Oil Fuel Gas Air Water, 1/8"NPT Thread Stainless Steel Pressure Transducer Pressure Sender by walfront
- **How much does it cost?** AR$73893 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.com.ar](https://www.desertcart.com.ar/products/100050963-30-psi-pressure-transducer-pressure-sender-pressure-transmitter-sensor-oil)

## Best For

- walfront enthusiasts

## Why This Product

- Trusted walfront brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Size:30 PSI
            
          
          
        
      
    
  


        
        
     
	       
     

     
                              
     
       
        
         
        
        	
        	
        		
        			Specifications:  Material: Stainless steel   Voltage: DC 5V   Pressure: 30 psi, 100 psi, 150 psi, 200 psi, 300 psi, 500 psi (Optional)   Thread Type: 1/8&quot; NPT      30 psi   Input: 0-30 psi   Output: 0.5V~4.5V linear voltage output. 0 psi outputs 0.5V, 15psi outputs 2.5V, 30 psi outputs 4.5V.   Accuracy: within 2% of reading (full scale).   Thread: 1/8&quot;-27 NPT.   Wiring Connector: Water sealed quick disconnect. Mating connector is included.   Wiring: Red for +5V; Black for ground; Blue for signal output.      Package Includes:   1 x Pressure Transducer (With cable)

## Images

![30 PSI Pressure Transducer, Pressure Sender Pressure Transmitter Sensor for Oil Fuel Gas Air Water, 1/8"NPT Thread Stainless Steel Pressure Transducer Pressure Sender - Image 1](https://images-na.ssl-images-amazon.com/images/I/31KyPq5y8ZL.jpg)
![30 PSI Pressure Transducer, Pressure Sender Pressure Transmitter Sensor for Oil Fuel Gas Air Water, 1/8"NPT Thread Stainless Steel Pressure Transducer Pressure Sender - Image 2](https://images-na.ssl-images-amazon.com/images/I/41fO2MemJrL.jpg)
![30 PSI Pressure Transducer, Pressure Sender Pressure Transmitter Sensor for Oil Fuel Gas Air Water, 1/8"NPT Thread Stainless Steel Pressure Transducer Pressure Sender - Image 3](https://images-na.ssl-images-amazon.com/images/I/41-hW-fwJfL.jpg)
![30 PSI Pressure Transducer, Pressure Sender Pressure Transmitter Sensor for Oil Fuel Gas Air Water, 1/8"NPT Thread Stainless Steel Pressure Transducer Pressure Sender - Image 4](https://images-na.ssl-images-amazon.com/images/I/31saMUUeTlL.jpg)
![30 PSI Pressure Transducer, Pressure Sender Pressure Transmitter Sensor for Oil Fuel Gas Air Water, 1/8"NPT Thread Stainless Steel Pressure Transducer Pressure Sender - Image 5](https://images-na.ssl-images-amazon.com/images/I/31TsHInVJDL.jpg)

## Available Options

This product comes in different **Size** options.

## Customer Reviews

### ⭐⭐⭐⭐ Good sensor, innacurate specifications
            
*by A***R on July 5, 2019*

This is a good, apparently industrial grade sensor.  The photo shows the wire harness terminated with a JST connector - mine came with pigtails (with the automotive connector at the sensor as pictured).  The sensor connector backshell is not rigidly attached to the connector, so do not pull on the backshell when removing the connector - pull on the locking tab, or you may risk pulling out the wires.  I have the 150psi version connected to an Arduino Nano clone.  Sensor provides stable, linear output over the full measurement range.The seller has provided some confusing information with regards to specifications and capabilities.  The sensor is actually more capable than advertised.  First and foremost is is an ABSOLUTE PRESSURE sensor.  That being said, it will provide linear output under vacuum, and does not have any apparent hysteresis around ambient pressure.  In addition, the specifications are ambiguous  when it comes to the sensor response.  Here are my observations (based on a test setup using a mechanical gauge, compressed air, and reading raw sensor output).  Note that my pressure readings around zero were most likely affected by the hysteresis of the mechanical gauge:0 PSIG (Approx 15 PSIA) = 0.62V0 PSIA (extrapolated) = 0.11V - Note:  I was able to see smooth readings when I pulled a vacuum on the sensor, but did not bother to make any calibrated measurements under vacuum because my application doesn't require vacuum.60 PSIG (Approx 75 PSIA) = 2.48V100 PSIG (Approx 115 PSIA) = 3.84V135 PSIG (extrapolated - approx 150 PSIA) = 4.93Vlinear scale factors (5V supply, 10-bit):  1.047 kPa/bit; 214.3 kPa/Volt; 0.1518 PSI/bit; 31.09 PSI/VoltI used Libre Office Calc (Excel) to plot the data, then a linear trendline with show equation to get the slope.Raw Data:PSIG  ADC (raw, 10-bit/5Vref)0  12710  20420  24830  31140  37750  44760  50870  58280  65190  719100  786Hope this helps!
  

### ⭐⭐⭐⭐⭐ Works great!
            
*by T***S on July 13, 2018*

Bought the 100 psi model for monitoring my RO system using a computer to get around the inaccurate mechanical pressure switches.  Comparing this sensor output to a gauge in tandem leads me to believe the sensor is more accurate.  Both tracked each other from 0-to 70 psi (highest I want to stress my system) and the gauge reading is within eyeball accuracy of the sensor's reported output.I have no trouble with leaks but then it's only the 100 psi version.
  

### ⭐ Save your money and buy a better sensor.
            
*by B***T on March 11, 2018*

Ordered the 500PSI sensor. Worked for about 2 minutes, now oil leaks out of the connector... Save your money and buy a better sensor.
  

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.com.ar/products/100050963-30-psi-pressure-transducer-pressure-sender-pressure-transmitter-sensor-oil](https://www.desertcart.com.ar/products/100050963-30-psi-pressure-transducer-pressure-sender-pressure-transmitter-sensor-oil)

---

*Product available on Desertcart Argentina*
*Store origin: AR*
*Last updated: 2026-09-28*