MotoShield Pro Auto Window Tinting Kit Customize Shade: 5% - 75% Nano Ceramic Precut Tint Film for All Cars, Trucks, SUV (1 Side Window) Rejects up to 99% IRR, 99% UV Blocking, DIY Easy Shrink

I was looking to get my car tinted for Christmas and after quoting the cost for all five windows to have ceramic tint applied to all side and review windows I stumbled across this product which was the correct type of film and percentage of coverage. The application process was very easy to apply to my windows because film was customized specifically to fit the windows on my car. The tint quality was another big factor that led to my decision in purchasing from this company. it was one of the best decisions I made as my car now is drastically cooler and provides me with the privacy I was looking for. After installation, I noticed that the company offers a lifetime warranty on their product , But you need to make sure that you register the film provided to Insure the warranty available. I will definitely recommend this to family and friends who are looking to upgrade their windows for both a cooler vehicle and privacy as well.

First let me say that this is a great product. Second, let me qualify that by saying the only experience I've had besides this with window film was the film I applied to the windows in my home. So when I decided to tackle this project because the local shop wanted over $500, I based my ability to get it done properly on this limited experience. What I discovered was this: side windows on a normal passenger car are fairly straightforward and it is possible to achieve acceptable results as these windows tend to be flat, vertical and of a manageable size. But the REAR window (on my car, a 2005 Chevy Classic) is tilted back at a 50 degree angle, has imbedded antennae, heating elements, and a field of small raised dots which may be for sun mitigation. The space is cramped, even with the rear shelf and seat removed. Bottom line: I was completely unable to get the film installed in the rear glass. I had watched several hours of Utube videos, and I had an assistant but was completely unprepared for the degree of difficulty there. I don't blame the product, I blame the hubris of the idiot I hired to install the product. The only product fault was that two of the pieces were mislabeled, but that wasn't much of an issue because of the obvious differences in shape. The seller included a practice piece and clear instructions; there were no creases or any defects when the product arrived, it was perfect. If anyone is still thinking of applying their own film, I heartily recommend this product. Just be aware of your own limitations, and be especially sure that you know how to heat shrink the film properly because it is an important step, ESPECIALLY on the rear glass. I think that someone in better shape than I would do a better job, so I'm giving this product 5 stars all around because my side glass turned out well enough that I'm not gonna just have the entire car redone by a shop.

The film for the 4 doors was cut accurately however the tack wasn’t as good as other films I’ve used in the past. I tinted windows years ago so I’m no stranger to the process. The rear window coming in one piece needing to be shrunk was odd as I’m used to seeming 3 pieces to accommodate for the curvature of the window. I followed instructions on how to use heat to shrink the film to form which was a disaster. The film does not shrink to form properly and I do not recommend anyone try to install one large piece of film to the rear window of any vehicle. No matter how clean the window from prep you’re bound to get contaminates under the film. The film wrinkles over itself, doesn’t slide like it should for proper placement and is almost impossible to finish without fingers or bubbles. My rear window turned out aweful and I’m going to have to remove and replace the film. The remaining Film on other Wu died remains hazy and scratched very easily during installation although I installed the same way I’ve always installed. Overall the only good thing about this product was its accuracy in shape.

Each section is labeled and is high quality. The installation for the most part went smoothly but my last two quarter rear windows seem to be short. I contacted the seller about it and they seem to be helpful and willing to find a solution. Overall it's a very good product. I have no bubbles or wrinkles and the adhesive bonded to the window nicely. I recommended the tint to a few of my friends already.

SO...not the easiest stuff to work with, and the 25% had an odd color to it (nothing “bad”, but I noticed it). It’s of pretty good quality - readily noticeable to be much better than any AutoZone/Walmart tints. Also, the laser cutting is very useful and pretty accurate (not perfect, but def good). Unfortunately, one of our pieces came with a tiny fold that couldn’t be resolved, and thus ended up having to have it done with other brand tint (deadline driven). ****THIS is why this company gets 5 stars from us...not only did they reply swiftly about the defect, and apologized/took responsibility, but they went the extra mile and compensated me in order to retain a customer - which they successfully did. We needed some windshield tint and let them know we were in the market, and since we didn’t need replacement window pieces, they sent us the windshield pre-cut free of charge and IMMEDIATELY!...no requiring us to spend money on return shipping or wait the time free return process with Amazon takes. Instead they confirmed their sincerity regarding accepting responsibility, and most importantly about not wanting any customer to feel as if they threw money away. **Its rare these days to find businesses that still practice true “customer satisfaction”, so it was all the more refreshing.

Installed on a 2013 Nissan Versa. Came packaged in a cardboard tube which is good, however, mine had a dent in the side so there were a few imperfections in the roll. I dont think it made a difference. The roll had dust on both ends, so I would recommend that the company place the product in plastic before inserting in the tube for shipping. Looks like a quality product. Dont try to install this without the right tools. I purchased a tint installation kit with different squeegees, plastic tools, razor knife, etc. I purchased a decent heat gun that has 12 temperature settings. Purchased two spray bottles from walmart, one for cleaner the other for slip solution. Slip solution I used was 2 cups distilled water and 1/4 tsp Johnson baby shampoo. Worked very well. Just because its pre cut doesn't mean you wont be cutting. They left an important part out of the video. After you remove the outer tint you then have to cut the clear line away, too. Otherwise you wont be able to place the tint on the outside of the window for the fitting and get it tucked into the moldings. The thing piece will be a little large but will tuck into behind moldings and trim panels. The door windows went in easily, I tried to take my time being careful but still managed to catch a corner with a squeegee folding it back or put a small crease in here or there. You have to press rather firmly to ensure you get all the solution and air out from under the tint. The rear window is where the trouble was. I removed the rear brake light housing and plastic pillar trim panels to allow for easier installation. I watched numerous videos and learned my lesson from the door windows. I didn't think my back glass was that curved but I guess I was wrong. I placed the tint on the rear glass and it did not shrink much. Still had many large fingers in it that I could not get rid of and no matter how slow I went, i still ended up with a few small creases in the tint. I figured I would place it inside the glass and try to shrink it that way. That worked better, however, it was still a lost cause. I ended up ripping it out and throwing it away due to all the fingers I could not shrink up and squeegee out. The only other option I know of is to use strips but you'd have to cut this in order to do that. Not going to attempt to install the windshield's today. Probably going ask a shop if they will install this product and have them do it.

I want to start by saying I don't ever leave product reviews good or bad on Amazon, if I buy something and it works....good it should. But this product has been so incredible, I want to tell everyone about it, especially after seeing some of the negative reviews from a year or two ago. Most of the negative reviews were related to poor customer service and not sure if they changed operations, but for me their service was great. They contacted me to confirm a detail I wasn't clear on my order form before shipping and appreciated their attention to detail. I also asked a question before having it installed and they answered right away. So as far as service they get 5 stars for me. For the tint itself, it arrived in a very strong and durable tube, nicely packaged. The color and clarity have been perfect but this heat reduction it provides is where their magic is at. I have had other brands that promise UV and heat reduction and some of the more expensive tints worked better than others, but my friend's testimony to this feature piqued my interest. I was skeptical at such a low price for ceramic tint but after only 1 weekend of using it, during 90 degree sunny summer days during this heatwave we've had, I can say this tint is the REAL DEAL. I will preface this review by saying I didn't install the tint myself. It didn't seem too difficult once opened but after saving money on the tint itself compared to what I paid in the past at tint shops, I had a 3rd party mobile tint person do it which ran me around $120 with tip, well worth it to save me the time. I asked him his thoughts on the tint as this his daily business and he said the precut was great and wanted to know what company it was so I passed him their info. All in all, I am happy my friend recommended this brand to me and its safe to say I'll be telling everyone I know with a new car to invest in this product.

Pros: 1) It blocks heat. TSER is more important parameter than blocking IR since blocking IR doesn't mean higher TSER. 2) Film is thick. It is 2.5mil or 60um thickness. It didn't feel cheap. 2.5mil is the same thickness with 3M crystalline film. 3) The precut was clean. Cons: 1) It's prone to scratches. I could see some scratches after the installation. 2) No information about the manufacturing facility. 3) Adhesive didn't feel tacky enough. I don't know the quality of the glue of this film yet but I concern. 4) Film didn't shrink well. Shrinking rear windshield film failed because of several creases. I guess it's because of the thickness and my skill level. After removing it, I purchased other ceramic film from other seller. It, however, shrunk well with zero defect. Film got hazed a little under direct sunlight. It's fine under shade. I believe it's a characteristics of ceramic films. So, we have to live with it or choose either carbon or dyed tint film. It's fine on side/rear windows but if it's for front windshield, I recommend to choose carbon tint film. MotoShield brand looks like a house brand with films made in somewhere nobody knows. It's not the best but it's not terrible because it's not easy to buy genuine 3M or Llumar film online. Most of 3M or Llumar film on ebay or amazon are fake. Their genuine films have printed logos on the film surface even though counterfeit films from China even copy the logos. No logo means 100% fake. Logos but bought on ebay or amazon means "almost" fake. This film is 3 star film, or 4 stars considering it's not easy to buy name brand's genuine films online. Edit) I have to remove the film on front driverside window. I've done tinting many times but this is the first time. There are two fingers, several tiny bubbles at the side. It wasn't there but it's shown after several weeks later. Because of the defects, it's 2 stars now.