2.5" to 3.5" Internal SSD/HDD Mounting Kit, Metal Bracket Adapter with SATA 3.0 Cable

This mounting kit worked just fine. Someone gave a 2.5" SSD that I wanted to add it to my HP Desktop computer. I was able to do so and this Mounting Kit made it possible.

I needed to mount a 2.5 inch SSD into a 3.5 inch bay and this bracket made the whole thing completely painless. The included SATA cable is a nice bonus so you do not have to dig around for one separately and the whole thing screwed together without any issues. My drive sits solid with zero rattling and the install took maybe five minutes tops. Great little kit for the price and I would grab it again.

No issues in installing it to my desk top.

Now I’m a computer scientist so the difficulty level is different. Easy to install obviously. Works great. Holds the drive in the correct place and doesn’t rattle around. Good price.

Se ajusto excelente a mi pc. La construcción es adecuada.

Good product

As expected, compatible with ssd

The main thing I wanted to note in this review is that the screws are all "CD ROM" sized. Most trays I've used like in the past have the smaller screws to hold the drive onto the cage and then normal hard drive screws to hold the cage into the computer. This one expects small screws to be used in all places, including mounting the cage into the PC. Normally this isn't a problem, but if you have very specific screws that need to be used (looking at you Compaq), the holes are too small. Fortunately, the metal is so thin you can jam it in there if you try hard enough, I was able to use larger screws with some elbow grease. The other thing I didn't like is that this tray felt short? When I took out the 3.5 drive that was in there and put this in it's place, the connections were not set much further back into a place the cables couldn't reach. I'm sure it was only an inch or so, but it made me have to re-route the cables. Would have been nice if this set the new drive connections to be where they would be relative to a 3.5" drive, not recessed back so far. All in all, it works, it does the job and it's cheap. But if you have anything that a fairly generic layout, like a Compaq or Dell or something, you may want to skip this one and go with the Sabrent instead. I've had much better luck with that one.

Lo he pedido para montar un disco de 2,5 SSD en un sobremesa, para así poder fijarlo en una bahía de 3,5 pulgadas. Lo mejor es que incluye también la tornillería y el cable serial ATA.

Worked as advertised. Sure you could get a mount, cable, screws etc separatly but for everything all in one is handy. And for those who've commented that the screw holes were in the wrong location, had to drill out, well they must have had the drive attached to the mount backwards. The screw holes are placed correctly so as to mount in a standard 3.5in drive bay. Used 4 of these in 3 different cases with no issues.

Alles gut

I bought these to fit a 2.5" SSD into a 3.5" holder in a Dell PC build I was adding to. They worked perfectly well and were quite cheap, to boot. There's not much more to say, other than that everything fitted great. They were well made, well finished and ideal for what I needed them for. If I need these in the future then I will most certainly purchase them. Thanks.

Utilisé pour installer un disque dur SSD sur un emplacement 3,5 pouces. Impeccable !