Folding Utility Knife with Belt Clip - Blade Fixed at 4 Different Angles, Easy to Use, Box Cutter Knife with Clip, Replaceable Blades, 4 Screwdriver

This is an excellent utility knife. It is exactly as described and pictured. Like another reviewer noted, the clip is a little small however, it can't really be longer or it will interfere with the screwdriver attachments. The clip can be removed if desired being attached with 2 6-star screws The knife body, clip, and arm that holds the blade is a heavy duty metal. The swing out screwdriver bit holders are plastic though. The seem pretty durable. I opened them and used a little force to see if they would snap off or come loose and they did not, although I didn't try with much force, maybe about 7 lbs of pressure and they held up. the bits slide in and out of their holder with ease, yet will not fall out on their own when held upside and shaken. The bits are a metal and the slot you slide them in the knife on the butt is also metal. They slide in and out of this slot easily too. There is a decent magnet inside the receptacle to hold them in place and does not fall out under normal operation nor do they fall out while moderately shaking (the bit will fall out when vigorously shaking it out). The bit seem to be a decent quality. No signs of twisting the ends after a few uses. 4 bits in total, 2 phillips slotted bits 1x ph1 and 1x ph2 and 2 flat head bits 1x 5/32 and 1x 9/32. The locking mechanism on this knife is great. Requires pressing the button/pin and holding down while maneuvering the blade open or closed. It locks in the fully closed position, the fully open position, and while open at the 25%, 50%, and 75% positions. Blade changes are effortless, takes only slight force to press the button and hold it while removing or inserting a blade. And to top everything off, it was a great price at around $6. I do recommend this utility knife and will be getting me a couple more.

When I first bought this knife the Hex receiver magnet would not hold a hex bit. The magnet looked like it was pushed too far down and the bit would never contact the magnet. So I wrote the mfg and they were great, they gave me a refund, I bought another one and that one worked just fine. Now, for my review of the knife. My only real issue is that the hex receiver is kind of sloppy, the bit does not fit very snugly. This is not really an issue when you use a bit directly in the receiver, if you add a bit extension, then the sloppyness really shows up and can be frustrating. It does, however, get the job done and having those four hex bits really do come in handy. Their are other knifes with similar hex bits on board but after buying one with the fold out bit receiver and nearly breaking my finder I went looking for an alternative and found this one and it was much less expensive. It uses razor blades instead of a real blade but that with the price and a rigid receiver, I’m sold. Then on top of that, the mfg is very responsive when there is an issue!

Really strong long lasting seriously its worth buying

Really good quality knife.its got a strong frame an the blades are VERY SHARP so be careful. Got 4 screwdriver bits built into the frame handle.

I will say it works and does what its supposed to but have been slightly disappointed with the build quality. The slot in the back for the screw driver bits was slopily milled on mine. It works but the bits are loose and a bit wobbly inside, far more than most bit holders. I would not be surprized if I strip it one of these days. The belt clip is also extremely brittle metal. I managed to break it off by accident. No big deal I wasnt useing it but it was a sharp edge. Went to remove the remains of the clip and found they used the clip to hold in the spring for the safety latch. Since its a required part I instead put the clip in a vice to bend it flat so I could put it back on. I found instead of bending the curved bits just snapped off. It did acomplish what I needed but I've never seen steel snap quite that easily. I'd rate this a Meh. It does its job and gives me access to a couple screwdriver bits like I was looking for but quality is middle of the road at best. I'll use it till it breaks and then get something different.

Amazing utility knife and handy tools. A must need! Sturdy and well made!

Garbage. So stiff couldn't even get it to open till I threw it at the ground. Threw it away. Don't waste your money.

Love everything about this thing except the fact that it has 2 useless locking positions The first one is only barely open and the second at a 90 degree angle... I like to use this blade at a 120 degree angle and I have to be kind of methodical choosing it or it locks at a different angle... sounds dumb I know but it’s the main reason I bought this blade over others Besides that I love it