OctoWS2811 Adapter for Teensy 3.x & 4.x - LED Driver

A must have for the teensy if you are doing pixel lights. The output signal alternates every other wire on the RJ45 connector. Converts the Teensy signal from 3.3v to 5v data for pixel lights. On one of my christmas controllers using a Teensy, I have 4 of these connected providing 32 channels which I am using for my MEGA tree. If going to be using greater than 8 channels on the Teensy, highly recommend doing a search for E1.31 and Teensy. You will find the arduino code that optimizes for the higher channels and pixel count.

I picked up this and a Teensy 4.0 to attach to it. Makes connecting the LED strips easy! Note this version doesn't have pin sockets, so you'll be soldering the Teensy to it. Not that hard, but if you have zero experience at soldering you might want to study up.

The media could not be loaded. Have DOF driving a Teensy with this shield to activate lights on a virtual pinball cab and it works great!

Needed one of these for a Christmas light show controller. This along with a Teensy 3.2 and a raspberry pi running FPP makes managing a ridiculous number of pixels very easy!

Worked perfectly with the Teensy3.2 I ordered with it. Nothing to complain about. Highly recommended.

Struggled with efficient setup of led strips in the past. This adapter makes live soo much easier and enjoyable.

Works great controlling 800 addressable LEDs