KOOMTOOM83mm Rubber Housing Seal Cap Dustcover for Headlight, Headlight Dust Cover Housing Cap for F150,Pack of 2

Needed bigger dust caps for my 2018 Ford F-150 which I installed new LED bulbs for both my lower and high beams in headlight. The factory dust covers are great if you are using factory a Halogen bulbs. LED bulbs with the cooling fans don’t allow the factory flat style caps to seat perfect. With this heavy rain recently my passenger side headlight has been getting moisture. When removing the factory dust caps I’m finding water underneath. Tried other dust caps and they didn’t fit properly, these actually fit with a little hand work behind the fender to access the headlight housing, low beams were harder to install then high beam just simply due to the tightness behind the lamp. Will see if the moisture stops now with these. Also helps with adding room behind the LED bulbs cooling fans so now they can breath alittle bit. Since heat is an LED’S worst Enemy! Hopefully these will keep moisture out! As for fitting on a 2018 Ford F-150, these 83mm fit great! Don’t even have to use any tie wraps with these, once there on they aren’t going anywhere.6/29/19 Update: these rubber dust caps work!! I had water moisture in my left headlight due to oem caps not sealing enough due to the extended cooling fan on my LED light bulbs. These caps sealed so good they caused the moisture not to escape! Had to remove and let the moisture dry first then reinstalled caps. After that the headlights have not gotten any moisture in them since even through heavy rain or car washing. Also allow better airflow for cooling fans on my LEDs which I have in both high and low beams. Worth every dollar they cost.Update 7/20/19: have had these dust caps for awhile now on my 2018 Ford F-150. In the beginning I was getting even more moisture in my headlights but that’s because these dust caps were working so well and I had moisture in the headlights still from when I had my oem dust caps. So I had to take them off and let the headlights dry completely, then reinstall the dust caps. Once I did that I have not had any moisture what so ever! And it’s raining season in Florida and I am constantly washing my truck. I use to get moisture in then all the time due to my upgraded LED bulbs which are bigger then oem bulbs and were causing the dust caps to not stay on completely letting in some water. Not the cause now.

I upgraded my headlights to LEDs, be protruding farther out than the halogen lights. So I purchased please trim them down and they fit perfectly. The stock covers would not fit. Really glad I found these. I don’t know what else I would’ve done.

Cut the bottom 2 rings off with a box knife, perfectly fit with my 2014 Cadillac ATS LED upgrade.

Easy to install. It may be fine but it feels a millimeter or two loose. If you count one too small it would be a major Pia to put on though. The material is very durable and well made.

If your headlight bulb wiring does not have to pass through the grommet, these are good. If you have a LED and need wiring to pass through the boot, you will need to cut it open. Better to modify the stock boots and have a better seal than a giant hole in the boot.

2019 jeep grand Cherokee. Was able to cut through rubber with box cutter since I didn’t need the 2 biggest fittings. Had issues fitting it at first in the tight space Jeep allows for the low beams. Recommend if you have similar issues heat up the headlight cover with hair dryer so the rubber has more flexibility and stretch. Quality seems pretty good and pleased with the additional depth for aftermarket LED’s.

These definitely provide the space needed when upgrading to LED lights with large heatsinks. I am so happy that I was able to get these with the lights as the last lights I upgraded with (Tiny Monsters Shown) even with their low-profile heat sinks would still make the OEM dust covers push out to the point where they would slide off when driving down the road. I needed some type of protection for the bulbs so they wouldn't suck up some rocks or debris while driving into the fans, and these bad boys were the answers. I am very happy with the purchase and recommend these to anyone in the market for some better dust covers that give the bulbs some room to breathe.

Keep out dust and moisture

I bought these to replace the stock dust covers which would not fit over my LED replacement headlights. Pretty easy to install and lots of room for the back of the LEDs. 2020 Ford F150.

A bit thicker and less flexible than expected, but I'm sure that I can make it fit.Fast shipping, and product is as advertised.

Impossible à mettre sur le cache, une déception pur et dure, moi qui pensait avoir trouver ma solution miracle pour mettre mes phares leds plus puissants, ils ont fini à la poubelle directement.

Davvero ottimi, soprattutto per chi non ha molto spazio per installare le lampade a Led comprese di ventola. Grazie mille!!

me sirvio cumple con lo que yo quería pero complicado de colocar al no ser rígido