VIVO Adapter VESA Mount Quick Release Bracket Kit, Stand Attachment and Wall Mount Removable VESA Plate for Easy LCD Monitor and TV Screen Mounting, Stand-VAD2

Works great or monitor arm setup(another quick release monitor didn't include nuts and washers), heard a nice click when putting it on, seems stable. Will update review to 5 stars if my monitor doesn't fall off it within a couple months

So I needed something like this so I could have a monitor on my desk and then at night move it to a wall mount where I could watch TV in bed. The only problem, is that it's not that difficult to place the monitor on and push the lever to enable the locking mechanism to keep the monitor in place. It's the reverse action. To get off the monitor and place it back on the desk. It's quite difficult. And I'm doing this with a 24" monitor and old one. 2009 model. But hey, it works. Maybe I'll get used to it in a while.

Happy with this product, I use a tall desk pole mount that isn't easy to adjust with all monitors attached and this allows me to safely move things around and make adjustments without risking my displays. Only downside is that while the fixture is pretty secure, it flexes/"snaps" between two angles if you try push or pull your monitors. I would advise if you want to make adjustments to monitor arms when using these that you grip the arm rather than the monitor.

Far too hard to remove the monitor once clipped on. There is a lot of wiggle until the monitor-side bracket has settled into the arm/stand-side bracket, at which point it becomes too difficult to remove. This "Quick" release system is poorly designed.

I would have given it five stars but for the fact that when the spacers are needed (in my case for a monitor with a recess), the longer bolts are too long - I had to go and find some shorter ones. For me M4x25 were perfect (and luckily I had some to hand). Solid mounting of metal. No additional rotational slack, a very minimal bend of the brakect when twisting left or right.

upgrade for my long arm in camper van

Work done ,

This mount can be VERY useful to solve unique mounting issues...with some caveats as others have noted.... The GOOD to GREAT: Used this mount to fix an HP branded 27" monitor to a Dell-specific 27" stand. As you look at OEM-specific stands, they are generally similar, with the difference being mounting bolt patterns and spacing on the monitor mounting heads...not VESA, but kind-of similar. Typically these are flat metal plates with a variety of holes, tabs, and slots that line up with the specific quick-release mounting plate pattern on the back of their own screens. * I had an extra Dell 27" stand, and using a standard VESA plate as a pattern, I found 2 top holes that lined up with the top 2 holes of a 75mm VESA mount. (Yes you do need to remove the trim plate(s) and remove the center screws that hold the plate to the mounting base top/tilt plate.) I marked 2 additional spots from the 75mm spacing, and and then drilled out, now having 4 holes that matched VESA mount spacing, at 75mm. * Different vendor OEM plates may require some fudging with 75mm and/or 100mm spacing until you can find or create holes that allow fixing of the Vivo VESA mounting adapter "back" plate. * I took off the square plastic Dell trim from the top of the stand, but was able to leave the small circular trim that covers the top tilt plate and spring tension mechanism. * Before reassembling, I sprayed the back of the top plate with some leftover paint, so that it wasn't bare metal...not necessary, but a nicer look. The MEH to MAD: As others have noted there are some manufacturing or quality type issues. Mine was opposite of other reviewers, in that the mounting and VESA adpater plates were so tight I had to use a hammer to initially separate. I tried to bend the grooves and plate around to loosen the fit, but does not easily or reliably release to allow removing the monitor. Once I fully mounted, it essentially froze tight again. It's not the biggest issue, and better than being loose and wobbly, but I would like the option to remove the screen from the stand as intended. Not a deal breaker. But a little discouraging, and reason for 4-star review. This mount is soooo close, but does enough to make it a really useful option for some unusual mounting situations. It's definitely worth trying to see if it works for your needs. ******************************************************************************* UPDATE 5/29/25: Despite the issues with the first mount, I purchased 2 additional, for a total of 3. Neither of the newer ones had the binding problem, and appear to cleanly release. I'm upgrading my review to 5 stars. Have now adapted a 2nd Dell stand (24") that required re-drilling all 4 holes for proper alignment/attachment. And, also an older Samsung stand (early 2000s 20.4" 204B)...all 4 holes in the metal bracket aligned with the 100mm holes, and just had to drill out the plastic trim behind the metal mount. VERY useful mounting bracket. Definitely try if you need to mount unlike monitors without buying a new VESA stand.

Excelente adaptador para poder quitar-poner cualquier dispositivo por medio de adaptador VESA. Lo uso con una tableta grafica Huion Kamvas 24 Pro 4K y es sencillo para ponerla y desmontarla a una base

Really great VESA adaptor, i had my Hibrid TV Monitor for a lot of years with that original stand that I was so bored of. This adaptor really came in handy with my dual monitor arms!

E' il secondo che acquisto, perchè in questo modo sposto il mio monitor in due stanze diverse a seconda dell'utilizzo. La staffa è robusta, il click di aggancio assicura che il monitor sia correttamente bloccato. Lo sgancio tramite levetta permette di sfilare comodamente il monitor dalla staffa.