amFilm Auto-Alignment OneTouch for iPhone 16 Plus [6.7''] Screen Protector + Camera Lens Protector, Tempered Glass, 30 seconds Installation, Bubble Free, Case Friendly, Anti-Scratch 2 Pack

Nice screen protection, pretty easy to install, had a few bubbles but they weren’t hard to correct, nice clear glass with nice smooth feel seems like it is good quality and sturdy, fits size perfectly

I choose this product because it came with the attachment making it easier to get the screen straight also because it showed the protectors for the back camera: I would give this 5 stars with the ease of how easy it is to apply, b hr the camera covers are a bit gimmicky maybe redesign them if even possible but the camera covers sticks out so far that mine cracked in my back pocket so the camera covers sticks seems like a waste because once they crack you can’t use your camera unless you take them off. Over all it’s a good product. I haven’t used a lot of screen protectors but I really didn’t expect the cover the break the 1st time I dropped. It. I find the screen protector odd because it cracks on drops when my phone screen wouldn’t have cracked so I’m still trying to figure out the purpose of paying $10 for these things to use one a month or more? Mine last almost a month before the screen cover broke then days later the camera cover broke while in my pocket: my phone is still in perfect shape just need to remove it but another protector, but I’m starting to find the whole screen cover thing a bit gimmicky. I don’t know how to feel about this brand so I give for stars I will purchase another brand next to compare. Also this one would not stay on my partners phone that was already cracked to cover it so it didn’t break more but we bought another brand that stays attached perfectly to the cracked phone to avoid sharp pieces in fingers but if your phone already cracked this is not the one

Update: I have 2 phones. I bought 2 seperate packages. The first one installed like a breeze, no issues. However, my comment about possible QC issues came to fruition and I'm not happy about it. When I installed the screen protector on my 2nd phone using the 2nd package (saving the spare in the 1st package was my original plan) it was not aligned properly. The screen protector was too high! I tried the 2nd one in the package and again same thing, too high. They were both mounted to the cradles too high. Then I tried installing the 2nd one from the 1st package, and it had a slight defect in the glass. I contacted the seller, they requested pictures which I provided and they are sending me 2 new packages as part of their warranty. So We shall see how these fair. QC is hugely important to get these mounted right on your phone!... The kit is great. The quality of my 1st protector on my 1st phone is super. No issues! So gave it 3 stars instead of 5 stars :( Screen protectors, the bane of my existence when buying a new phone. I've seen progress evolve with these. I remember getting no aids to assist with adhesion. Then just getting stickers to assist with adhesion. Then there were some that included a cradle to put on your phone, then YOU place the screen protector using that as a guide. This product changes all of that. It was a little confusing at first, but gosh was I impressed. With just one caveat that I am worried about from a QC perspective. If QC is good, then should not be a problem, but if one slips through the cracks, it could cause an issue. I love the packaging. They are packaged really well with 2 'kits' in one package. Each cradle with screen protector already installed in the cradle and ready for you came in little baggies with a sealed package for each that also contains a wipe, small microfiber, and various stickers. As far as the stickers, yes you get the little tab like stickers to help with getting rid of pesky fibers of dust. HOWEVER, something that I've never seen before is it comes with a WHOLE screen sticker. Let me tell you this is super handy. I prep the glass really well, I even wear latex gloves. Then I applied the whole screen sticker right down as I further prepared to mount the glass. This whole screen sticker prevents ANY dust from getting on the phone's screen as you tinker with stuff. It allowed me to pull the rest of the items out of their packaging and make sure I knew what I was doing all while I didn't have to worry about any dust on my screen because the sticker was covering it all. Then I get ready! I hold the screen protector horizontally over the phone. Then I sneak another hand under and start to peel off the sticker that covered the whole screen and then I set the glass that's already pre-installed in the cradle for you right on the screen like it was nothing. You just run your finger down the middle of the glass to help with adhesion and just wait a few seconds while the adhesion magic happens. After that, you slowly pull up on the cradle, because that also pulls off the protective film from the top of the glass as well. Pull slowly! Lastly, use the microfiber cloth to just rub around with a little force to make sure there are no bubbles as you rub from the center towards the outer edges. I was truly amazed at the ease of installation. Lastly, just a note on QC. The magic happens only because the factory must adhere one side of the glass to the cradle. If this is done by a machine, then great, but if it's done manually I'm worried that errors or lack of QC can cause your glass to not be mounted properly to the cradle and could cause issues with mounting it. That is my only concern. Other than that, really impressed. I installed it on my iPhone 14 Pro Max. Does not affect touch. Does not affect the front facing camera or any sensors. And it works fine with my Otterbox Commuter case. :)

This screen protector was incredibly simple to install thanks to the OneTouch alignment system. It fit my iPhone 16 Pro Max perfectly and looks crystal clear once applied. The touch sensitivity stays smooth, and it does a great job preventing scratches. The only downside is that it can crack a little too easily, even from light drops. Still, for the price and ease of use, it’s a solid option for protection. Pros: Super easy installation with the OneTouch system Clear, bubble-free finish Excellent touch response and screen coverage Good scratch protection Cons: Glass breaks easily from minor impacts Still gets bubbles when installing sometime

I’ve used this brand for my old phone and the quality is really good! it was super easy to install and fits well on my phone. i loved that it came with the camera protector as well! there’s were two screen protectors and two camera protectors. it also came with two packs of the prep stuff like dust removal stickers, screen cleaning wipes, and microfiber cloths. it also came with a little scraper tool to get any air bubbles out. would buy again!

One of the films worked perfectly but the second had a slight crinkle in the bottom so it will not smooth out the air bubble.

HANDS DOWN BEST, EASIEST SCREEN PROTECTOR IVE EVER PURCHASED!! I will NEVER buy another brand! I always have my husband do put them on cause my hands shake but lately even when he does it I end up with bubbles or it’s a little crooked. This one is so simple I did it myself, super freakin fast and it came out perfect & no bubbles!! You CANNOT mess this up!! Price point is amazing for the type of screen it is. The fit is also perfect unlike some that may end up a little too skinny or short. The fact that it covers the entire screen makes me feel like my phone is better protected. So far this is amazing and I hope it lasts longer than the past brands I’ve tried.

It’s easy to use, but still had issues with bubbles even after using the tool to help smooth out bubbles. Pretty good quality.

Great transparency u won’t notice that u applied a screen protector easy installation with no bubbles

La sensación táctil es muy buena, se siente de calidad y el kit de instalación es muy bueno

Edge cutting very nice But adhesive might be not good enough bcoz it’s bubble from inside

Awesome product and quality is outstanding

I’ve previously purchased similar screen guards from Spine and ESR, but the adhesive on the edges was always a problem. As with other brands, you get that thin black bezel line that takes away the look of the 16 Pro Max. However, this adhesive on the edges is fine, and the installation is super easy. And guess what? The phone screen looks as big as it is. I highly recommend this product. Note to the seller: Your product description states that it comes with two screen guards, but I only received two. You should be more clear in your promise.