PIR Motion Sensor Light Switch, Occupancy & Vacancy Motion Sensor Switch, Operable Without Ground Wire, No Neutral Wire, Single Pole, TDOS5-HL-W-2PCS, White

My husband installed these and oh boy, I love them. It is so nice to walk into closets, storage spaces, and the guest bathroom without turning back to flip on a light. You can set them for different lengths of time to shut off after they are triggered on. My husband was able to follow the directions and they work great.

The package includes clear instructions in English.. Product itself is of good quality. The wiring terminals are better than others. wire is inserted and tightened with screws for better connection. The only thing needs improvement is the screw for the cover plate. It is Philip type but no bit holds it firmly and it keeps slipping.It connects like a regular switch with no Neutral required The motion sensor behavior is normal. It works all the time but sensitivity varies. Sometimes turns on at 12 feet and you have to get as close as 6ft. But other similar products do the same. Overall a nice product. with reasonable price. .

My two switch locations both did not have a neutral or ground wire. These switches work great for my locations. The switches are easy to adjust for sensitivity and time-out. With only two wires to connect, installation was very easy. The wire terminals were easy to use and located in a convenient place. I've been using these switches to control lights in a laundry/storage room and my wife and I are very happy with the results. The price seem reasonable, making these a really good value for me. For one switch the default motion detection and time-out seemed great. For the other location I need to both increase the sensitivity and time-out. The adjustment was quick and easy. The build quality seems good, but only time will tell.

These motion sensor switches are exactly what I needed at a low price point for my older home. The fact that they operate without a ground or neutral wire made installation much easier than other brands I've tried. I’m giving them 4 stars because while they are more than adequate and very responsive, the instructions for the time-delay settings were a little confusing—but for the price and convenience, they are a solid value!

We've been using a Leviton occupancy sensor switch to control our garage lights for over 5 years and it has worked flawlessly the entire time. However, we recently installed a portable A/C unit in the garage and the only place would could put it is about 5-6 feet from where the switch is (about 3 feet out and 4 feet to the side of it.) We noticed that every time the A/C would turn on so would the lights! I did some looking and decided to give this one a try. I wasn't sure if the lights turning on was being caused by some type of current 'surge' in the line or if it was actually caused by the switch detecting the air blowing from the unit. I went with this TOPGREENER switch because it requires a neutral (which I figured would be more reliable than ones that don't since they're basically bleeding off the line to the lights) and also because it has a sensitivity control on it. I installed the switch and everything appeared to work fine; initially no false triggering from the A/C and the switch functions perfectly. I turns on right away with motion, stays on continuously as long as there is motion in the room, and turns off 20 mins after the last motion event occurs. It also will turn right back on if I re-enter the room after it's gone off, even if that was just seconds ago. There are a lot of reviews indicating that it does not function this way, but maybe they have changed the programming in them. I'm not sure, but I do know it works exactly as expected. After testing for a while I did find that it would still occasionally turn on when the A/C cycled on, so I decreased the sensitivity control slightly and it has never happened since. My only complaint about this switch is that it does not seem to detect motion as well as my old Leviton switch did, especially off to the sides. Our switch is on the side wall as you come into the garage, so when we open the door we are at about a 45 degree angle from the switch; the Leviton would turn on immediately when door was opened and before we even had a chance to start into the garage whereas this switch requires us to actually walk through the doorway and take about one step into the garage before it turns on (at this point we are directly in front of it.) It also doesn't appear to detect motion at a distance as well, but I assume that is mostly due to my having to decrease the sensitivity, so I'll live with that. It will work ok for our needs and is a fair trade-off. One thing I really love about it is that you can remove the cover to access the setting controls without having to remove the wall plate! This is a wonderful design. Not the case with the Leviton. All things considered this is a great switch! It works for us and solved our unique problem.

Cannot recommend these to anyone. I bought the two pack of TopGreener PIR Motion Sensor Light Switch. I only needed one for my garage, but I got the two pack because, why not? I'm sure I'll find a use for a second one eventually. My reason for buying these was so that my overhead lights (controlled by my switch and not my garage door opener) could sense when I was pulling my car into the garage, so that I didn't need to keep my overhead on when I was out shopping or whatever. These were fairly easy to install - they use push wire connectors and screws to secure. There is no neutral required, but I have a neutral in my wiring, so I used it. Hot and load are supposedly interchangeable, but I do a fair amount of wiring and know what connects to what, so I connected everything as labeled. Unfortunately, the first unit I installed only worked once or twice before it broke. The light would stay on indefinitely, even if I clicked or held down the power button. Only way I could turn my lights off was cutting the circuit breaker. Sometimes you get a defective unit - I get it. So I used the second one in my two-pack and after powering the circuit back up, it seemed to be working. The PIR motion sensor was turning on and off, the button was working. But after about two minutes of me testing it, the unit began buzzing, and then I saw smoke start to come off the unit. Luckily, I had kept the unit open and was standing right next to my breaker, so no permanent damage done to my home or my wiring, outside of the smell of burnt circuit board. I cannot recommend this to anyone, because I can imagine some poor DIY'er putting this into their wall, seeing the light turn on, and walking away, not knowing that they are about to start an electrical fire.

Works great! Easy to install and configure.

Excellent product. Installed it in wife’s closet because she would always forget to turn the closet light off. Motion sensor picks up movement as soon as u walk in closet and automatically turns it on and off. U can adjust the range of the motion sensor and the timer

Uno de los pagadores me salió dañado.

Very pleased with this light perfect for my closet

Easy to install and sensitive

Me gusta que soportan cualquier tipo de foco. El unico inconveniente es que necesitan un cable neutro para funcionar (mismo que casi nunca está presente en instalaciones antiguas). Lo que no me gusta es que toma algunos segundos para reaccionar a la presencia humana. En general los recomiendo tomando en cuenta sus limitantes.